Hi Steve, Can you tell me how to configure ASL direct bridge to YSF we are currently avoiding conflict with DMR/Brandmeister regulations at the moment. I tried it and keeps noticing in the debug that

#analog_bridge #mmdvm_bridge

Happy New Year Everyone, I am trying to bridge ASL directly to YSF/FCS. We are trying to avoid conflict with Brandmeister requirements at the moment which is why we are considering to bridge ASL and F

#analog_bridge

Hi Steve, Analog_Bridge in my computer was installed using DVSwitch-System-Builder. Do I need to set anything under the MACROS section (to set the mode)? Anyway, below is the config of my setup. =====

#analog_bridge

Hi Steve, Just one more question before the reinstall, does Analog_Bridge run dvswitch.sh automatically at startup? 73, Geoffrey VE6GCD

#analog_bridge

Thanks Steve, Does that mean I can insert a startup macro for the USRP node via rpt.conf so it will run dvswitch.sh in YSF mode? 73, Geoffrey VE6GCD

#analog_bridge

Hi Steve, I followed your instructions as soon as I returned to Calgary. YSF packets to/from room FCS00462 are now being vocoded by my AllStarLink node. Thanks and Happy New Year!. 73, Geoffrey VE6GCD

#analog_bridge

I setup one before, you just need to set it up using the configurator in the Zum website. Afterwards you just copy the created file to the included SD card, insert it to the ambeboard and you should b

Can you tell me what do you want to do with it on the Pi? I used the Zum Ambeboard as vocoder hardware for Analog_Bridge. So upon inserting the configured SD card (Ambe Server mode with IP address 192

I also tried MD380emu before but I prefer the Zum Ambe Server as the audio conversion to DMR is like night and day between the two. However, when I used it for YSF I noticed some popping sound in betw

In addition, additional network changes might be required depending on where you will use DVSwitch mobile. If the Ambe Server is installed in the house, and you want to use DVSwitch mobile from outsid

I am having the same issue, I noticed this after reinstall from server crash. It was on PHP 7.3 when it happened. Upgrading to PHP 7.4 did not help either. Ran auto-refresh add-on in Chrome with 1 sec

Hi, I would like to setup MMDVM_Bridge where FCS room can comminicate with a Brandmeister Talkgroup. Due to the loop ban processing in BM, I would like to set it up such that DMR will have minimum of

#mmdvm_bridge

Hi Steve, Can you tell me how to set this up for ASL USRP node? The downloaded pyUC.ini file has defaultServer=DMR. aslMode=0 For AllStarLink Do I need to set defaultServer to blank, while aslMode=1?

Thanks Steve, I will try to play with it and see how I can use it to interface ASL and S-COM 7330. 73, Geoffrey VE6GCD

Thanks Steve, This is interesting, might also try pursuing this route. I will reconfugure rpt.conf as advised and let you know. 73, Geoffrey VE6GCD

I just caught a glitch: Transmit is disabled after double clicking the Transmit Button twice right after opening the app.

It is possible to link AllStarLink to a Wires-X round room, not very straightforward though. It all depends on the interface you are using. For example, an ASL sound fob may not be able to transmit to

Hi Justin, What kind of audio fob are you using? I am also having similar issues. However, I suspect there's something wrong with the audio fob I am using. This is because the audio of my IAX connecti

#dmrlink

Are you referring to an XLX reflector in C4FM mode? XLX in C4FM mode is not a real YSF reflector. It is internally a DMR engine performing an automatic TLV conversion to C4FM within the same module. T

Hi Steve, Yes, I was probably overthinking about the set up. I assumed the YSF reflector is located on a separate server knowing that the XLX reflector already have C4FM mode. That is why I added YSF