You should not be connecting allstar to tg 91. allstar can be used on approved tg's like your seven digit id or with an OK from BM admin. BM is a digital system its not intended nor was allstar intend

#brandmeister #analog_bridge

I found that the ircgateway was running which blocked xlx from running. and the large cpu increase. my vm went to 100 percent for not sure how long was due to the quantar bridge. Would it be possible

Last check with BM admins it was no. Alec

if you install DVSwitch Repo it should give you what you need. Usually when I build bridges it starts out with the version the vps company provides. Alec N1AJW

Yes that's how I did it. I put the xlx server in the cloud and run the ambe server locally. Seems to work correctly most of the tme. I dont get much traffic Alec N1AJW

i am getting the same thing occasionally on my setup using on DVSwitch on VM. I will also try to connect MMDVM_Bridge as a repeater (duplex) rather then hotspot (simplex) and see if it works. thanks f

Are you linking this to a BM TG? you can use MMDVM_Bridge to link this to the BM with your id+2 and then map it to the TG in selfcare. do the same for ASL link on your raspberry pi. Alec N1AJW

#mmdvm_bridge #hblink #analog_bridge

all the scripts found in https://dvswitch.groups.io/g/Mobile/files/Mobile%20DVSwitch%200725.pdf "404 error cant be found" They are probably incorporated in newer versions now? Alec N1AJW

p.s. you can never bridge any BM TG's and TGIF TG's together. they must remain autonomous of each other in your bridges.. Alec

Use Open Bridge in HBlink.cfg. Submit a support Ticket to BM and give them the TG's you want from BM. These will then always be avail on TS1 once the bridge is made. provide ip of your hblink, your ca

the TGIF YSF2DMR bridge has mysteriously started working again. update pistar and the host should be there. I know that's not the answer to your question but you wont have to do this since its "myster

#mmdvm_bridge

https://register.ysfreflector.de/installation make sure not to bridge it to 31665. outside bridges arent allowed per Robert. Alec N1AJW

#hblink

are you running hblink3? andy has put a bridge in there for xlx. works great to any xlx reflector

? from the sample? onliy hblink and confbridge have samples.

all those suggestions are nice but that's not his problem. The problem is Digital Ocean. I used to use them for TGIF's YSF Reflector and it did the same thing. Some providers work better for YSF Refle

while this thread was open I have another HBridge error. latest hblink 2.0 File "./hb_bridge_all.py", line 163, in dmrd_received if not acl_check(_rf_src, self._CONFIG['GLOBAL']['SUB_ACL']): exception

that's an excellent idea. Love it. cant wait to see it work. Thanks. Alec N1AJW

i have bridged hblink on dmr to xlx using dmrgateway and nxdn and ysf with nxdn to dmr and ysf to dmr.

there's a ysf wide to p25 bridge made by Andy iin Chile. Juribeparada. I have never tried that one. https://github.com/juribeparada/MMDVM_CM

that may be true but how to you direct it to the specific xlxreflector and module. its located on the same machine as xblink. i want the audio to be bridged with audio already on myhblink.cfg