Why can't you just start with a standard Debian / Raspbian, dump the Arch custom build and add the extras too it instead then? 73, Peter

#mmdvm_bridge #hblink #analog_bridge

Steve, I'll either figure out how to get it all working or have a big screwed up mess going haywire.

#mmdvm_bridge #hblink #analog_bridge

And finally the answer comes out. Hamvoip uses arch linux as its base and none of the dvswitch software will work on arch. It has been built for the Debian based systems like raspbian, dwbian and ubun

#mmdvm_bridge #hblink #analog_bridge

Actually, the DVSwitch binaries will work on HAMVOIP but the apt packages will not install on ARCH. The packages have to be pulled apart and the pieces installed manually. That being said, the AllStar

#mmdvm_bridge #hblink #analog_bridge

Ah just learned something new. I new that apt wouldn’t load it so I assumed that they were built for Debian based systems and had to be built from source. So there you go. I would still dump hamvoip a

#mmdvm_bridge #hblink #analog_bridge

Steve, Ok, that's very helpful. I should have stated ARCH instead of using ARM, sorry on my part. I will try to install on my Debian machine and have it point to the IP of the all-star node after I ma

#mmdvm_bridge #hblink #analog_bridge

I hate to disagree with you but YES it does run on ARCH Linux with HAMVOIP software. Try access DMR TG314651, Allstar 45743, Echolink 275408 or even better yet check out my dashboard and watch it work

#mmdvm_bridge #hblink #analog_bridge

Having a hard time locating & install & setting up MMDVM_Bridge, Analog_bridge to do allstarlink, d-star, dmr, p25 linking but haven't seen any for Debian. I am at a loss to completing the 2-year proj

#mmdvm_bridge #hblink #analog_bridge

<https://dvswitch.groups.io/g/allstarlink/files/ASL%20to%20DMR%20Bridge.pdf>

#mmdvm_bridge #hblink #analog_bridge

Are you linking this to a BM TG? you can use MMDVM_Bridge to link this to the BM with your id+2 and then map it to the TG in selfcare. do the same for ASL link on your raspberry pi. Alec N1AJW

#mmdvm_bridge #hblink #analog_bridge

Help me to make working the application tx and Rx

#analog_bridge

<https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS

#analog_bridge

Hello, I downloaded vom Github the aktual arm64 version. but on the Debian is only 2.28 running. /lib/aarch64-linux-gnu/libm.so.6: version `GLIBC_2.29' not found (required by ./Analog_Bridge.arm64) An

#analog_bridge

Yes Mike, Im running the stick at the same host using pi3, my problem is when i issue the DMR mode @ Dvswitch mobile client the error pertaining to port 31100 will close. and will not receive audio fr

#analog_bridge

HI Ernie, I only have one instance for analog and mmdvm bridge this is right after install and configuration from the pdf documentation posted here. Regards, Andrew

#analog_bridge

Andrew, By the error you are seeing I have to assume you are running AMBEServer on the same machine as Analog_Bridge is running on. If this is so, you can just run the DV3000 (or other stick) directly

#analog_bridge

You may have another Analoge_Bridge running. MMDVM_Bridge and Analoge_Bridge have usually been installed to start up when your device is restarted. I get caught out myself. I like running them in term

#analog_bridge

i did stop the ambe server here is the logs. same error on port 31100 will close upon sending the marco ^DMR mode I: 2020-06-04 03:23:37.362 Tune macro: *DMR will invoke "/opt/Analog_Bridge/dvswitch.s

#analog_bridge

Hi All, Can you help me with the error below? it seems that theres an error on port when clicking the marco<>Mode Select <> DMR on mobile phone port 31100 will close. I: 2020-06-03 04:51:38.416 MESSAG

#analog_bridge

Tom, The connection to a c-Bridge would be through IPSC_Bridge rather then MMDVM_Bridge. It would look like this for ASL: ASL <-> Analog_Bridge <-> IPSC_Bridge <-> c-Bridge. Steve N4IRS

#analog_bridge