|
YSF<>Echolink - can someone explain if it's possible and what I need to install on my linux server? 2 messages
#analog_bridge
Yes it's possible (I'm doing it as a subset of a much bigger system). Easiest path is to use an AllStar node with Echolink capability configured linked to Analog_Bridge and MMDVM_Bridge, talking to yo
Yes it's possible (I'm doing it as a subset of a much bigger system). Easiest path is to use an AllStar node with Echolink capability configured linked to Analog_Bridge and MMDVM_Bridge, talking to yo
|
By
Tony Langdon
·
|
|
DVSwitch server not linked anymore 4 messages
#analog_bridge
Hi My problem is solved, After some time I could not link to the DMR Brandmeister server? We are forced (in the Netherlands) now to set the RX and TX frequency to the same value (simplex). This is don
Hi My problem is solved, After some time I could not link to the DMR Brandmeister server? We are forced (in the Netherlands) now to set the RX and TX frequency to the same value (simplex). This is don
|
By
rademaar@...
·
Edited
|
|
after 3 days of searching, I give up. need help 3 messages
#analog_bridge
#mmdvm_bridge
after playing again and again, I decided to redo the rpt, module and iax conf files on the asterisk side. it all started to work. Now I will have to do some compare of those files to understand what w
after playing again and again, I decided to redo the rpt, module and iax conf files on the asterisk side. it all started to work. Now I will have to do some compare of those files to understand what w
|
By
Pierre Martel
·
|
|
DMR AB with c-bridge access 2 messages
#analog_bridge
Inline: It in AB.ini ; Information for DV3000 hardware decoder ; There are two configuration modes: IP (AMBEServer) and serial (direct connect hardware) ; Use top server and port if using AMBEServer ;
Inline: It in AB.ini ; Information for DV3000 hardware decoder ; There are two configuration modes: IP (AMBEServer) and serial (direct connect hardware) ; Use top server and port if using AMBEServer ;
|
By
Steve N4IRS
·
|
|
Allstar <--> DMR & DVSWITCH Was working... 6 messages
#brandmeister
#mmdvm_bridge
#analog_bridge
I wonder if they have finally cracked down on all the non-RF modes of getting on? I got a similar issue, but I’ve found it to only happen on group 3100. What happens is that you might get the first tr
I wonder if they have finally cracked down on all the non-RF modes of getting on? I got a similar issue, but I’ve found it to only happen on group 3100. What happens is that you might get the first tr
|
By
Brent Harding
·
|
|
ASL->TGIF Prime 2 messages
#analog_bridge
#mmdvm_bridge
#dmrlink
I was using Hamvoip as I was trying to use a Pi4 (seems to be the only option currently for ASL + DVswitch, happy to be corrected there). I reinstalled with a 3b plus and the ASL Rpi image and install
I was using Hamvoip as I was trying to use a Pi4 (seems to be the only option currently for ASL + DVswitch, happy to be corrected there). I reinstalled with a 3b plus and the ASL Rpi image and install
|
By
Justin Painter
·
|
|
WA3XYZ PL 88.5 Announcement 18 messages
#analog_bridge
#mmdvm_bridge
Yes, that is the example string used in HamVoIP, which generates a GSM file on the node setup script.
Yes, that is the example string used in HamVoIP, which generates a GSM file on the node setup script.
|
By
Patrick Perdue
·
|
|
#analog_bridge #dmrlink #mmdvm_bridge 2 messages
#analog_bridge
#dmrlink
#mmdvm_bridge
Update: I tried connecting using my in-house IP address directly to the DV Switch PI. It doesn't connect. My IAX does connect to my main Hamvoip AllstarLink Node. I'm clueless when it comes to this. 7
Update: I tried connecting using my in-house IP address directly to the DV Switch PI. It doesn't connect. My IAX does connect to my main Hamvoip AllstarLink Node. I'm clueless when it comes to this. 7
|
By
Don Poaps
·
|
|
Dynamically reconfigure MMDVM_Bridge and Analog_Bridge ? 3 messages
#analog_bridge
#mmdvm_bridge
Thank you Steve ... That's exactly what I was looking for ... that should keep me busy for a while ... Best, Gerry. W6WNG
Thank you Steve ... That's exactly what I was looking for ... that should keep me busy for a while ... Best, Gerry. W6WNG
|
By
Gerry Filby
·
|
|
Multiple private nodes one cloud server using DVSwitch Mobile - Audio Issues. 21 messages
#mmdvm_bridge
#analog_bridge
#brandmeister
So I copied from another location and replaced the DVSwitch.ini file and edited the two ports. And it is working now. No clue what caused the issue, but it is working again!
So I copied from another location and replaced the DVSwitch.ini file and edited the two ports. And it is working now. No clue what caused the issue, but it is working again!
|
By
Willie Sandin
·
|
|
asl.macro documentation / examples 6 messages
#analog_bridge
Yes you need cmd (copy and paste error) It's in the same place as your 997 [functions] off the top of my head.
Yes you need cmd (copy and paste error) It's in the same place as your 997 [functions] off the top of my head.
|
By
Steve N4IRS
·
|
|
ASL to P25 bridge 67 messages
#analog_bridge
I cleaned some of the early ASL DAHDI troubleshoot messages out of the thread (86 messages) I hope someone reading the thread will learn some things. Steve N4IRS
I cleaned some of the early ASL DAHDI troubleshoot messages out of the thread (86 messages) I hope someone reading the thread will learn some things. Steve N4IRS
|
By
Steve N4IRS
·
|
|
"Muted" prompt 6 messages
#analog_bridge
Yes user blocked comes from bm, but not “muted” Corey n3fe
Yes user blocked comes from bm, but not “muted” Corey n3fe
|
By
Corey Dean N3FE
·
|
|
#analog_bridge #mmdvm_bridge
#analog_bridge
#mmdvm_bridge
Need help please have issues with connecting to 1999
Need help please have issues with connecting to 1999
|
By
Jeremy WX8NWS 3169368
·
|
|
analog-DMR bridge DMR-MARC connection 8 messages
#analog_bridge
No, but it will get you set up with ASL and Analog_Bridge. Then you will need to connect IPSC_Bridge Sent by smoke signal (AT&T)
No, but it will get you set up with ASL and Analog_Bridge. Then you will need to connect IPSC_Bridge Sent by smoke signal (AT&T)
|
By
Steve N4IRS
·
|
|
#analog_bridge 6 messages
#analog_bridge
i did stop the ambe server here is the logs. same error on port 31100 will close upon sending the marco ^DMR mode I: 2020-06-04 03:23:37.362 Tune macro: *DMR will invoke "/opt/Analog_Bridge/dvswitch.s
i did stop the ambe server here is the logs. same error on port 31100 will close upon sending the marco ^DMR mode I: 2020-06-04 03:23:37.362 Tune macro: *DMR will invoke "/opt/Analog_Bridge/dvswitch.s
|
By
andrew delgado
·
|
|
#analog_bridge #analog_bridge 3 messages
#analog_bridge
bonjour monsieur comment on faire pour changer les port dans le ficher analog bridge.ini..cordialement
bonjour monsieur comment on faire pour changer les port dans le ficher analog bridge.ini..cordialement
|
By
...
·
|
|
#analog_bridge Problem with Analogbridge on Orangepi
#analog_bridge
Hello, I downloaded vom Github the aktual arm64 version. but on the Debian is only 2.28 running. /lib/aarch64-linux-gnu/libm.so.6: version `GLIBC_2.29' not found (required by ./Analog_Bridge.arm64) An
Hello, I downloaded vom Github the aktual arm64 version. but on the Debian is only 2.28 running. /lib/aarch64-linux-gnu/libm.so.6: version `GLIBC_2.29' not found (required by ./Analog_Bridge.arm64) An
|
By
Kim-Benjamin Lütkemeier
·
|
|
Installing & setup of MMDVM_Bridge Analog_bridge to do allstarlink, d-star, dmr, p25 linking. 23 messages
#mmdvm_bridge
#hblink
#analog_bridge
YES I am running Allstar on a Pi 4 now.
YES I am running Allstar on a Pi 4 now.
|
By
Brad N8PC
·
|
|
Connecting more that 2 Analog_Bridges 13 messages
#analog_bridge
You're typing "port address" when you mean port number. I think that's why you are confusing JJ et al. Assuming they're all running on the same host, they will all use the localhost IP ADDRESS (127.0.
You're typing "port address" when you mean port number. I think that's why you are confusing JJ et al. Assuming they're all running on the same host, they will all use the localhost IP ADDRESS (127.0.
|
By
Jeff DePolo WN3A
·
|