Hi Is possible, using connector with BM and this one with YSF reflector. We have 3 Wires-x connections and an IMRS repeater

#mmdvm_bridge

FWIW: WIRES x bridging would be done over RF using a radio and a hotspot. DVSwitch therefore doesn't care about that part, so long as the hotspot connecting the WIRES x room can talk to the reflector.

#mmdvm_bridge

Hi Ben, I am not handling that part. Once a week, I use MMDVM_Bridge to connect one of my YSF reflectors (A) to another YSF reflector (B) so that my local club members can participate in a net. YSF re

#mmdvm_bridge

Hi David, how do you setup a such gateway between an YSF reflector and a WiresX node ? (or the pc WiresX node i suppose) ? Thanks 73, Ben

#mmdvm_bridge

I'm using a ~2-year old version of MMDVM_Bidge on a Raspberry Pi and have encountered a problem with traffic not going between a YSF reflector and a WIRES-X room. Are there release notes somewhere sho

#mmdvm_bridge

Sure

#mmdvm_bridge

Can do. Are you OK if I start an email thread off-list to coordinate with Sean N0PBA?

#mmdvm_bridge

I would like to setup a schedule to capture data rather then just filling a log with data hoping for a sample transmission. Can you get this scheduled? Steve

#mmdvm_bridge

Steve - any luck with the watch on the P25 Reflector? I think Sunday morning when you reconnected we had a few crashes between me and K2KLN. Unfortunately all this P25 testing revealed another issue w

#mmdvm_bridge

Update: I had about an hour conversation over the P25 Reflector that ended up crashing multiple times on 4/2 at about 9pm CDT. I grabbed the logs from both P25Reflector and MMDVM_Bridge. They're on GM

#mmdvm_bridge

Trying to setup DMR to D-STAR so I can incorporate D-STAR into my DMR HT for EmComm activities. I have a DV-Stick. Does this look right? Just smashing my head in at 3AM. Thanks Hayden N2HAY

#mmdvm_bridge

MMDVM_Bridge version 20210309_V1.6.4 git #5142ba0 P25Reflector version 20210213 It's the 707 Rural MN reflector, 707p25.kd0ioe.com:41000. Thanks! -Andy

#mmdvm_bridge

Send me the info on the reflector (IP and Port) I can setup a system to capture the data before the crash.

#mmdvm_bridge

This is the first I've head of it. Not that I think it matters, what is the version of MMDVM_Bridge. If it's something P25Link is sending, it's going to be hard to troubleshoot. Steve N4IRS

#mmdvm_bridge

Good evening, I had a chance to start gathering more info this evening from a couple sources and watched logs to see when it was occuring. I currently have a working P25 <-> MMDVM_Bridge/Analog_Bridge

#mmdvm_bridge

Thank you.

#mmdvm_bridge

In Analog_Bridge.ini: [USRP] address = 127.0.0.1 ; IP address of USRP partner (Allstar/Asterisk or another Analog_Bridge) txPort = 31001 ; Transmit USRP frames on this port rxPort = 31001 ; Listen for

#mmdvm_bridge

Hey all. When I did a test transmission from my Allstar node, the audio going into the DMR network is fine, but when I did a test transmission from the DMR network, the audio going into Allstar is ver

#mmdvm_bridge

Np problem. It brings up a issue. It is a configuration problem to have the mode enabled but not the networking. MMDVM_Bridge should exit gracefully and try to give the user an idea of the problem. We

#mmdvm_bridge

Well now, that fixed it. I could have sworn I had that enabled in config, but apparently, there was another one I had to enable. Thanks so much for helping me resolve this puzzling issue! This had me

#mmdvm_bridge