Will, It was after an update. Now running 9831.2021.1.10. Tried to go back to a previous version from January 2019 with same results. Its just strange that I am running the same issue to playback.py u

I have been running this configuration for several years now without any issues. Lately I have had a problem with the stream from the C-bridge to HBLink cutting out at regular iniverals. From HBLink t

Correct. Is your cbridge ipsc connection a master or client. I set all my hblink connections as master in cbridge and client in dmrlink.cfg. Execute IPSC_Bridge and watch the log console. Make sure UD

#dmrlink #hblink #best_practices

Use iptables to trigger of a source port and route to a destination ip and port.

Well on the allstar side ulaw codec is probably your best bet to use. Since you really cant control that across the network makes it hard. Another issue is when a station on the analog side starts to

#best_practices

Below I am running 3 dmr links from allstar You have to set environment variables each time you execute otherwise it uses the same dvswitch.ini file. This is my rc.local at startup /root/md380-emu -S

Your option Port= and local= are not the same and local is > 1024?. Can you try a different server??

If i run two instances with just the DEFAULT stanza it works fine. I run "netstat -aepn | grep 3" shows nothing using those ports except the IPSC_Bridge listening for HB_Bridge. I can just run two ins

with config of ################################################ # HB_Bridge configuration file. ################################################ [DEFAULTS] gateway = 127.0.0.1 # IP address of Partner

Currently I have IPSC_Bridge configured as below. And two masters configured in dmrlink.cfg master 1 and 2. IPSC_Bridge works fine. However when I try the same with HBBridge i get an error. Is HBBridg

I am currently using HBMonitor. I had that issue. I had to change the config file see below. What I had to add is in bold. The page doesn't display correctly with more than 4 Masters but the HBlink st

I found my issue. In the HB_Bridge config I had set to translate to TS 2 of the talkgroup between HBlink and DMRlink. I'll try it again this evening. Sorry bout that.

I'm currently running dmrlink. I have a Motorola repeater connected to a master stanza and hb_bridge connected to a master stanza and that gives ALS access thru hblink. I have several talkgroups defin

Its now working .. Thank you.

Deleted and cloned master and still seeing same results.

Made sure I am using master branch and re sync'd. Same results. My confbridge.py still work great!!

Removed MASTER in hblink.cfg for parrot.py config. It will run with the PARROT client disabled. But I still get the same error with the client enabled. The instance of confbridge.py I added a master P

I am unable startup parrot.py. New at this and have conference bridge already running. Trying to run this in another directory seperate from main bridge. Error below.. I know I am missing something bu

I: 2018-07-02 16:11:20.567 DMR, Begin TX: src=3148824 rpt=3148824 dst=114814 slot=2 cc=1 metadata=3148824 M: 2018-07-02 16:11:22.621 DMR, TX state = OFF M: 2018-07-02 16:11:25.912 DMR Slot 2, received

I had the same issue. Check debug output on bridge and saw it was coming in on DMR side. We were using an unused talkgroup. Disconnected and reconnected and it seems to fix it.