Hello, Patrick. Where may I find this faster voice? And yes, this telemetry issue is a very big nag on busy nodes. Thanks for posting your solution.

You may bridge it via YSF2DMR, point the corresponding networks in their respective stanzas and away it goes. No need to have a MMDVM Bridge or Analog Bridge, if this is like you state in your questio

Hello Friend. Message #2143 addresses a procedure to verify the latency timer. As for me, I gave up on integrating DSTAR to the node because of this very same issue, even if the timer is set to 1, the

Hello. Here is a working copy of my config file for node 48270. This has a private node for ASL<>YSFReflector. [System Fusion] Enable=1 LowDeviation=0 SelfOnly=0 RemoteGateway=0 ModeHang=0 [System Fus

Hello Steve. Congratulations on achieveing this interlink. I will try it out. I tried unsuccessfully to do this, but with the document you provice it should work. Nice diagram you posted as well. I us

Hello. If you compiled from DL5DI's repository it is then possible to run without GUI by running the command ./ircddbgatewayd You will need to configure it beforehand, this is done by running ./ircddb

Jeff, I thank you for your comments. Very well taken. I came into this project with 0 AllStar knowledge, I got my Node number over on Memorial Day Weekend, so your input is very valuable to me. The Ec

Oh yes it does help. Many thanks.. I could then make 1999 the echolink connection, 1998 the DMR connection, and my node 48270 which is the AllStarlink node may have these added features on to it via C

Steve: Here is my echolink.conf [el0] call = TG9AOR ; Change this! pwd = 5up3rt1tt4 ; Change this! name = BM DMR TG70406 ; Change this! qth = Guatemala ; Change this! email = qrz@... ; Change t

I requested and used my node for the echolink connection (48270), it works, it connects immediately upon starting the asterisk service. My node is 540570(EL). Does my ASL Node accept connections from

I am able to see more detailed explanation on the section "Transcode one digital format to another", I believe you are referring to this? It is very helpful.

Excellent document. Thank you so much. As you may or may not recall, I followed Kv4S's how to guide, it in turn made reference to another how to guide on setting up the allstar node. It differs somewh

I noticed that sporadically my DMR transmissions on TG704 would not make it 100% into YSFreflector. Log output below: I: 2018-06-09 00:36:31.144 YSF, Narrow transmit (72 bit) M: 2018-06-09 00:37:16.44

It does help very much. Thank you for your detailed response. I will review everything and report back.

So because of your document, I was able to implement the DMR to YSF interconnect. The explanation helped me very much. I did, however, had to mkdir another completely separate directory and copy the c

Excellent! Many thanks. Will go and read now.

Thank you very much.

Thank you, Steve, for your reply. I am interested in bridging my Echolink node and BM DMRTG704. I would like to know if I would be able to link the conference created by your software to another node

I am almost done reading all 240+ messages in this forum, while doing that I noticed a rough draft in the files section on how to set up Analog Bridge (wiki is empty) After setting up Analog Bridge.AR