got it, Thank Steve. I have 2 time 4 ambe chips, usb board that I want to try to use. So maybe it would be easier for me to setup the server at my place and connect to the vps as the fix spot on the i

#best_practices #dvs

ok, got it! I will create a few private nodes and will link them with AB with usrp and MB connected to each network I want to add. will need to check the port carefully. one question, for the transcod

#best_practices #dvs

I want the asl hh and dmr tg to stay connected all the time. But all the other digital networks connect on demand. The 30288 TG is an RF link to HH and ASL and it was designed for that permanently

#best_practices #dvs

It make total sens but it also mean that I have to connect the private nodes to an analog bridge and this analog bridge to one reflector of the specific digital network , so that would mean at least 4

#best_practices #dvs

Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the

#best_practices #dvs

It is not that they are unhappy about bridges. What they don't like is the fact that some bridges are done in such a way that it creates loops between multiple networks.

after playing again and again, I decided to redo the rpt, module and iax conf files on the asterisk side. it all started to work. Now I will have to do some compare of those files to understand what w

#analog_bridge #mmdvm_bridge

I have a vps that run both allstarlink and dvswitch the install went well and I was able to connect to asl did a link to Hamshack Hotline and all is working. I also have a iaxrpt connection and I can

#analog_bridge #mmdvm_bridge

100% and BTW did I say thanks for all the great jobs you all doing here? if not, big thanks !!!!

There is a saying, if you don't do politics, politics will do with you. :-) Catch 22... We are doomed to have some politics in our life.

Thanks Jeff, I will be looking into this. I must have not read the right info.. Talking about our projects is always helping get them right.

Steve, I am with you on this, but the BM team see the MMDVM protocol as a repeater or hotspot client, not as a multilink system. And when you put a frequency that is not really in use, for them you ar

https://wiki.brandmeister.network/index.php/Open_DMR_Terminal_Protocol But still if you ask for an open bridge link you will have it. Is that so complicated? Unless you are doing something that is not

Just ask them to make an open bridge connection available to you.

I think it is a good idea to have a problem when there is packet duplication, cause the only reason I can think of for the cause of packet duplication is a loop into the network. Now if there is a loo

Great to read this..

Do you know if they accept to BGP announce a /24 of 44 net ip address?

Just making a test

That is the best answer you could provide Steve. The tricks in this kind of linux server is just keep the file you modified for the software you need. In a case like the DVswitch suite of software. In

Why dont you ask BM to start the liaison on there side?