Could someone enlighten me was to what "Macro Result 256" means. I know 0 means success I assume 256 is abject failure?

I can only report what I see happening. This on 2 different computers. The wget from github works, the wget from the script doesn't.

Error 404 occurs when I try to run the script ./DVSwitch-System-Builder.sh Here's the reported error --- ./DVSwitch-System-Builder.sh --2020-09-25 16:49:44-- http://dvswitch.org/install-dvswitch-repo

Followed instructions cd /tmp wget https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip cd /srv unzip /tmp/master.zip mv DVSwitch-System-Builder-master DVSwitch-System-Builder cd DVS

Do you have port forwarding setup on the router?

I am thinking of setting up a second DVSwitch server. I currently have port forwarding enabled on my router for the first server. So my question is: Would I run into problems having a 2nd server?

I added the line ExecStartPre = /bin/sh -c 'echo "1" >> /sys/bus/usb-serial/devices/ttyUSB0/latency_timer' To the systemd unit file and enabled the service, and all is now working fine. I guess anothe

Yes

This is the error that I see in the ircDDBGateway log I was wondering what the problem could be?

Could you offer any insight into this 2020-09-03 16:03:53: Error returned from sendto (port: 20010), err: 22 2020-09-03 16:06:08: Cannot connect the TCP client socket, err=110

yes, the ambeserver is started by a systemd unit file. I am out most of day tomorrow, but will give it a try before the weekend. again thanks for all the help.

OK if I restart everything, from fresh reboot, with AB configured for ambe server, but ambe server not yet started. stop AB do echo 1 > /sys/bus/usb-serial/devices/ttyUSB0/latency_timer start amber se

The DVLink image works fine, the only difference I can think of is that on the DVLink image I installed the amber server from https://nw-digital-radio.groups.io/g/ambe/topic/how_to_install_ambeserver_

OK AB set for Ambeserver, but server not started cat returns 1 AB set for Ambeserver, Rebooted server started cat returns 16 stopped ambeserver and tried to run echo 1 > /sys/bus/usb-serial/devices/tt

When I ran "cat /sys/bus/usb-serial/devices/ttyUSB0/latency_timer" when running ambe server it was 16 disabling the ambe server the output is 1

Well that works fine, disabled the ambe server and just went direct to the dongle. using ambe-server seems a more elegant solution, as it means I can use Blue DV ambe also on another device.

Steve thanks for all your help so far. I too am busy for a while, so this will have to wait.

OK I'll try the none ambe server, then what?

I'll look at it in the morning.

So basically cutting out the middle man? OK i'll look at it in the morning.