If you are connected to a Ysfreflector one should not use the search and direct. All it does is send unwanted packets. Change using software or #number. If there is a Wires-x node connected it will ta

Most link builders would love an answer to your question. Does not just effect BM it takes over wires-x nodes. Wires-x software has a time block built in. Get it all the time. Would be nice if ysfrefl

I should not be a port problem. When you installed the dashboard for the ysfreflector it should have been put in a separate directory. Dashboard for DVSwitch is in /var/www/html Dashboard for my m17 r

You are not alone. This happens on my network. Its the Wires-X users here. I use DVSM and come in via Asl. The audio is of hi quality. Just to upset them. Get Outlook for Android

Very bottom right of your android phone. The symbol looks like < Get Outlook for Android

Just md380-emu Get Outlook for Android

If all settings are correct in Analog_Bridge. And md380-emu is giving errors. I fixed my problems by removing it and then reinstalling. Use remove --purge. Something gets corrupt.

I think you have the same usb stick that I have. Played for hours had no joy . Will only work with ambeserver. When running its got a green Led. Get Outlook for Android

I get the same problem. If I restart the ambeserver with AB running all will work fine for days. Get Outlook for Android

Quickest way to see if its working is to look at the Dvstick. Constant light will appear on Tx. Or start AB in a window and watch the log. There will be a line saying using hardware. Get Outlook for A

I want to connect to the Ysf side of the YCS Server. Works ok If I connect to the Fcs side At the moment I have. Ysfreflector to MB to MB to Ysfgateway to YCS (Ysf DG-ID 35) Traffic passes from the Yc

Its not a hardware problem. Only 2 channels are being used. With the third not being used. That's where the problem lies. You need a pair. Get Outlook for Android

Your problem is your ambe dongle. Dropped one of them in my system and I got the same results. A pair may work better. Reverted back to my single 3006 Get Outlook for Android

Wires-x gateway to wires-x gateway does not work. Wires-x to mmdvm does not work. Wires-x with modified mmdvm software works. Get Outlook for Android

All you need is Xlx to Mb to Mb to Xlx Get Outlook for Android

Hello Tim I never look at logs. Just look at the info on the screen. Can see whats going on in real time. Also see whats gone down then just restart the software. There is always info passing back and

In the Analog_Bridge.ini loglevel = 2 you could change it to 0 I never change it as I use this info to see whats going on. As I run in terminal windows the info from the logs act like a dashboard for

You may have another Analoge_Bridge running. MMDVM_Bridge and Analoge_Bridge have usually been installed to start up when your device is restarted. I get caught out myself. I like running them in term

#analog_bridge

If you are running the ambeserver on the same device. address = 127.0.0.1 ; IP address of AMBEServer rxPort = 2460 ; Port of AMBEServer address = /dev/ttyUSB0 ; Device of DV3000U on this machine baud

XLX Will be passing its traffic via Tg9. What I do is MB to MB to Dmrgateway. In the settings of the Dmrgateway rewrite tg9 to tg on Brandmeister. This works well on Dmr+ and Brandmeister. You can als

#mmdvm_bridge