|
level differences between YSF and DMR (again)
Hi: I'm sure this has been brought up before. I have a system using DVSwitch, which involves an XLX reflector. Currently, the XLX module to which DVSwitch is connected is also configured as an autolin
|
Hi: I'm sure this has been brought up before. I have a system using DVSwitch, which involves an XLX reflector. Currently, the XLX module to which DVSwitch is connected is also configured as an autolin
|
By
Patrick Perdue
· #7765
·
|
|
metadata management
Yes, that's what I was referring to. I don't know what the process is for having your reflector listed, only that it can be done.
|
Yes, that's what I was referring to. I don't know what the process is for having your reflector listed, only that it can be done.
|
By
Patrick Perdue
· #7745
·
|
|
metadata management
As I understand it, you can set up a private P25 reflector which is available to anyone who uses the pi-star host files, thus, no need to link to a public reflector. This is what I plan to do. I will
|
As I understand it, you can set up a private P25 reflector which is available to anyone who uses the pi-star host files, thus, no need to link to a public reflector. This is what I plan to do. I will
|
By
Patrick Perdue
· #7743
·
|
|
Security password on Brandmeister
You only need to change the password=passw0rd line in the [DMR Network] stanza of MMDVM_Bridge.ini for any DVSwitch instance, replacing it with the hotspot security password you've set up on the Brand
|
You only need to change the password=passw0rd line in the [DMR Network] stanza of MMDVM_Bridge.ini for any DVSwitch instance, replacing it with the hotspot security password you've set up on the Brand
|
By
Patrick Perdue
· #7739
·
|
|
metadata management
OK, so things are pretty much as I thought they were. Just wanted to make sure I wasn't missing anything should I decide to redesign this system. I'll probably keep things as-is for now, then add anot
|
OK, so things are pretty much as I thought they were. Just wanted to make sure I wasn't missing anything should I decide to redesign this system. I'll probably keep things as-is for now, then add anot
|
By
Patrick Perdue
· #7736
·
|
|
metadata management
I'm not great at writing out flows. My setup currently doesn't use ircDDBGateway, since that's all handled at the XLX reflector end. So, it goes like this. Allstar <-> AB <-> HBLink <-> MB <-> XLXD (D
|
I'm not great at writing out flows. My setup currently doesn't use ircDDBGateway, since that's all handled at the XLX reflector end. So, it goes like this. Allstar <-> AB <-> HBLink <-> MB <-> XLXD (D
|
By
Patrick Perdue
· #7729
·
|
|
metadata management
Sure, but I'm currently going through two of them to get from Allstar to DStar. I'm just wondering if there's a way to drop one of them out and still maintain metadata. I could directly connect A_B an
|
Sure, but I'm currently going through two of them to get from Allstar to DStar. I'm just wondering if there's a way to drop one of them out and still maintain metadata. I could directly connect A_B an
|
By
Patrick Perdue
· #7727
·
|
|
metadata management
Hi: I have a system that incorporates ASL, XLX, HBLink and DVSwitch. I'm toying with the idea of adding P25. Currently, DStar is handled by XLX and a pair of transcoders connected to the XLX reflector
|
Hi: I have a system that incorporates ASL, XLX, HBLink and DVSwitch. I'm toying with the idea of adding P25. Currently, DStar is handled by XLX and a pair of transcoders connected to the XLX reflector
|
By
Patrick Perdue
· #7725
·
|
|
Analog Bridge
Analog_Bridge is only used to transcode uncommon audio formats, like DMR to P25, or DStar to YSF. DMR, NXDN and YSF use the same codec, so MMDVM_Bridge handles that with no need to translate through A
|
Analog_Bridge is only used to transcode uncommon audio formats, like DMR to P25, or DStar to YSF. DMR, NXDN and YSF use the same codec, so MMDVM_Bridge handles that with no need to translate through A
|
By
Patrick Perdue
· #7715
·
|
|
XLX899 <> Allstar 40171
If you're using HamVoIP, it's much, much easier to dedicate a second Pi to DVSwitch and connect USRP between them on the LAN. I've done this, and it works well. I also have a couple of ASL 1.01 system
|
If you're using HamVoIP, it's much, much easier to dedicate a second Pi to DVSwitch and connect USRP between them on the LAN. I've done this, and it works well. I also have a couple of ASL 1.01 system
|
By
Patrick Perdue
· #7635
·
|
|
DStar on DV Switch Mobile
Not in the context of DVSM, but I ran a remote AMBEserver for Analog_Bridge for a while, ran into some problems and eventually scrapped it for md380emu, since I didn't care about DStar. My DStar bridg
|
Not in the context of DVSM, but I ran a remote AMBEserver for Analog_Bridge for a while, ran into some problems and eventually scrapped it for md380emu, since I didn't care about DStar. My DStar bridg
|
By
Patrick Perdue
· #7282
·
|
|
Allstar voice ID's
A few things you can do: In /etc/asterisk/rpt.conf: 1. Change the value of telemdefault. 0 = no telemetry, with the exception of initial connect failure messages, 1=on (default), 2=telemetry only for
|
A few things you can do: In /etc/asterisk/rpt.conf: 1. Change the value of telemdefault. 0 = no telemetry, with the exception of initial connect failure messages, 1=on (default), 2=telemetry only for
|
By
Patrick Perdue
· #7212
·
|
|
attenuating USRP gain post-AGC processing
Hi: I have a bridge set up using AGC with the following parameters: usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 0.50 ; Gain factor when usrpAu
|
Hi: I have a bridge set up using AGC with the following parameters: usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 0.50 ; Gain factor when usrpAu
|
By
Patrick Perdue
· #6655
·
|
|
agile Allstar node from MMDVM
I would’ve thought that as well, although if I Chi up on a digital radio and start sending DTMF, it sounds pretty pure on other DMR radios, as well as on the other side of MMDVM bridge. I was pretty s
|
I would’ve thought that as well, although if I Chi up on a digital radio and start sending DTMF, it sounds pretty pure on other DMR radios, as well as on the other side of MMDVM bridge. I was pretty s
|
By
Patrick Perdue
· #6528
·
|
|
agile Allstar node from MMDVM
Hi: I was just asked by someone if it was possible to pass DTMF from YSF to DMR to an Allstar node such that it can be driven remotely from MMDVM, rather than what most people want going the other way
|
Hi: I was just asked by someone if it was possible to pass DTMF from YSF to DMR to an Allstar node such that it can be driven remotely from MMDVM, rather than what most people want going the other way
|
By
Patrick Perdue
· #6526
·
|
|
Allstarlink
Unfortunately, I can’t really help, other than to ask if you are attempting this installation on Debian Buster. A friend recently ran into this, and ended up using stretch instead, because it just wor
|
Unfortunately, I can’t really help, other than to ask if you are attempting this installation on Debian Buster. A friend recently ran into this, and ended up using stretch instead, because it just wor
|
By
Patrick Perdue
· #6364
·
|
|
Is there a simple way for Bridging a Brandmeister TG to an XLX Reflector (new 2020 Version)
In the example of bm tg <->MB_bm<->MB_xlx<->XLX ref how would you direct to a specific BM talkgroup? Just assume TG9 and a static talkgroup on the BM self-care page?
|
In the example of bm tg <->MB_bm<->MB_xlx<->XLX ref how would you direct to a specific BM talkgroup? Just assume TG9 and a static talkgroup on the BM self-care page?
|
By
Patrick Perdue
· #6349
·
|
|
pop and jitter at the start of transmissions from DMR
Hi: This is nothing new, but I'm trying to figure out where it's coming from. At the start of each DMR transmission, when listening on Allstar, there is a small pop sound. I've been on some other Alls
|
Hi: This is nothing new, but I'm trying to figure out where it's coming from. At the start of each DMR transmission, when listening on Allstar, there is a small pop sound. I've been on some other Alls
|
By
Patrick Perdue
· #6327
·
|
|
Changelog
I installed the new A_B yesterday morning, and enabled AGC. What a difference! Very smooth, and gets through analog a lot better with certain radios. Thanks for the great work.
|
I installed the new A_B yesterday morning, and enabled AGC. What a difference! Very smooth, and gets through analog a lot better with certain radios. Thanks for the great work.
|
By
Patrick Perdue
· #6316
·
|
|
YSF to DMR, specifying talkgroup
Hi: Perhaps I'm missing something really obvious here, but when using MMDVM_Bridge to go between a YSF reflector and a DMR master server, how do you specify which DMR talkgroup to use? The only refere
|
Hi: Perhaps I'm missing something really obvious here, but when using MMDVM_Bridge to go between a YSF reflector and a DMR master server, how do you specify which DMR talkgroup to use? The only refere
|
By
Patrick Perdue
· #6271
·
|
