Allstar <-> DMR Audio
Jim - K6JWN
Good evening.
I didn't want to thread jack the other DMR to Allstar Bridge thread going on, so I figure I would start my own..
So, I spent the better part of today getting ASL, Analog_Bridge and MMDVM_Bridge running on a Debian 9 VM. I have all the pieces connected together, but I am only getting jarbled audio between the links.. I have scanned over the posts and some searching on google and found several mentions of using a DV3000 hardware device. I was under the assumption that this particular link could be all done over software. Is that the case, or did I miss a piece somewhere in my software components that handles audio?
Any insight to what I missed would be great!
Thanks!
Jim, K6JWN
|
|
Jim,
Can you show us your Analog_Bridge.ini? I would also like to see a section of the log where the audio is garbled. 73, Steve N4IRS
|
|
Jim - K6JWN
Attached is my Analog_Bridge.ini
Which log are you wanting to see? Analog_Bridge or MMDVM_Bridge?
Jim, K6JWN
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:15:23 AM To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] Allstar <-> DMR Audio Jim,
Can you show us your Analog_Bridge.ini? I would also like to see a section of the log where the audio is garbled. 73, Steve N4IRS
|
|
You are using the emulator. Can you check to see if it is running:
ps -ef | grep md380-emu and then netstat -unap
|
|
Jim - K6JWN
That was it, the emulator wasn't installed. After installing it and restarting everything, audio is good!
Thanks!
Jim, K6JWN
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Mike Zingman - N4IRR <mike.zingman@...>
Sent: Friday, May 18, 2018 8:35:32 AM To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] Allstar <-> DMR Audio You are using the emulator. Can you check to see if it is running:
ps -ef | grep md380-emu and then netstat -unap
|
|
Corey Dean N3FE <n3fe@...>
I also answered your BM request. Corey N3FE
On Fri, May 18, 2018 at 12:26 PM, James Nessen <nessenj@...> wrote:
|
|
Jim - K6JWN
Thanks for the quick response on that Corey.
Jim, K6JWN
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Corey Dean N3FE <n3fe@...>
Sent: Friday, May 18, 2018 9:59:21 AM To: main@dvswitch.groups.io Subject: Re: [DVSwitch] Allstar <-> DMR Audio I also answered your BM request.
Corey N3FE
On Fri, May 18, 2018 at 12:26 PM, James Nessen
<nessenj@...> wrote:
|
|
No problem. I have an item on my list to improve the error handling (log messages at the very least) for this as I can see it will be a reoccurring issue.
I also have a different way of invoking the emulator that may solve the launching issue anyway.
|
|