Topics

Master Server.


Peter M0NWI
 

That’s more power than I use for 10 IPSC repeaters, some MMDVM and some transcoding between to 2.

My CPU Idles 99% of the time.
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: 23 January 2019 20:05:03
To: Cort N0MJS via Groups.Io; main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
If I understand you correctly, this is sufficient enough. I will be using a hosted server in a datacenter.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 12:01 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
It can only use one CPU core, so multiple cores don’t help. If you’re gonna have one core, make it a fast one. 10x more storage than you need. Easily get by on half the RAM.

On Jan 23, 2019, at 1:59 PM, Roselito de los Reyes <Tolitski@...> wrote:

I was wondering if these specs are sufficient enough

2GB RAM
1CPU Core
50GB SSD Storage
2TB Transfer
40Gbps Network In
2000Mbps Network Out

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: Wednesday, January 23, 2019 11:56 AM
To: main@DVSwitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
Hi Cort, 

more like scenario # 2.

73, Lito WI6Y

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Lito - WI6Y
 

Haha ok


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 12:15:32 PM
To: main@dvswitch.groups.io
Cc: Cort N0MJS via Groups.Io
Subject: Re: [DVSwitch] Master Server.
 
Yes… Assuming that core is really yours to use and not 10:1 oversubscribed :)

On Jan 23, 2019, at 2:05 PM, Roselito de los Reyes <Tolitski@...> wrote:

If I understand you correctly, this is sufficient enough. I will be using a hosted server in a datacenter.

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 12:01 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
It can only use one CPU core, so multiple cores don’t help. If you’re gonna have one core, make it a fast one. 10x more storage than you need. Easily get by on half the RAM.

On Jan 23, 2019, at 1:59 PM, Roselito de los Reyes <Tolitski@...> wrote:

I was wondering if these specs are sufficient enough

2GB RAM
1CPU Core
50GB SSD Storage
2TB Transfer
40Gbps Network In
2000Mbps Network Out

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: Wednesday, January 23, 2019 11:56 AM
To: main@DVSwitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
Hi Cort, 

more like scenario # 2.

73, Lito WI6Y

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Cort N0MJS <n0mjs@...>
 

Yes… Assuming that core is really yours to use and not 10:1 oversubscribed :)

On Jan 23, 2019, at 2:05 PM, Roselito de los Reyes <Tolitski@...> wrote:

If I understand you correctly, this is sufficient enough. I will be using a hosted server in a datacenter.

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 12:01 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
It can only use one CPU core, so multiple cores don’t help. If you’re gonna have one core, make it a fast one. 10x more storage than you need. Easily get by on half the RAM.

On Jan 23, 2019, at 1:59 PM, Roselito de los Reyes <Tolitski@...> wrote:

I was wondering if these specs are sufficient enough

2GB RAM
1CPU Core
50GB SSD Storage
2TB Transfer
40Gbps Network In
2000Mbps Network Out

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: Wednesday, January 23, 2019 11:56 AM
To: main@DVSwitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
Hi Cort, 

more like scenario # 2.

73, Lito WI6Y

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Corey Dean N3FE <n3fe@...>
 

I can tell you that is more hardware than what I am running in a vmware session and mine has no problems.  I would guess it would be good.

Corey  N3FE


On Wed, Jan 23, 2019 at 3:05 PM Roselito de los Reyes <Tolitski@...> wrote:
If I understand you correctly, this is sufficient enough. I will be using a hosted server in a datacenter.

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs=me.com@groups.io>
Sent: Wednesday, January 23, 2019 12:01 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
It can only use one CPU core, so multiple cores don’t help. If you’re gonna have one core, make it a fast one. 10x more storage than you need. Easily get by on half the RAM.

On Jan 23, 2019, at 1:59 PM, Roselito de los Reyes <Tolitski@...> wrote:

I was wondering if these specs are sufficient enough

2GB RAM
1CPU Core
50GB SSD Storage
2TB Transfer
40Gbps Network In
2000Mbps Network Out

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: Wednesday, January 23, 2019 11:56 AM
To: main@DVSwitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
Hi Cort, 

more like scenario # 2.

73, Lito WI6Y

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Lito - WI6Y
 

If I understand you correctly, this is sufficient enough. I will be using a hosted server in a datacenter.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 12:01 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
It can only use one CPU core, so multiple cores don’t help. If you’re gonna have one core, make it a fast one. 10x more storage than you need. Easily get by on half the RAM.

On Jan 23, 2019, at 1:59 PM, Roselito de los Reyes <Tolitski@...> wrote:

I was wondering if these specs are sufficient enough

2GB RAM
1CPU Core
50GB SSD Storage
2TB Transfer
40Gbps Network In
2000Mbps Network Out

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: Wednesday, January 23, 2019 11:56 AM
To: main@DVSwitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
Hi Cort, 

more like scenario # 2.

73, Lito WI6Y

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Cort N0MJS <n0mjs@...>
 

It can only use one CPU core, so multiple cores don’t help. If you’re gonna have one core, make it a fast one. 10x more storage than you need. Easily get by on half the RAM.

On Jan 23, 2019, at 1:59 PM, Roselito de los Reyes <Tolitski@...> wrote:

I was wondering if these specs are sufficient enough

2GB RAM
1CPU Core
50GB SSD Storage
2TB Transfer
40Gbps Network In
2000Mbps Network Out

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: Wednesday, January 23, 2019 11:56 AM
To: main@DVSwitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
Hi Cort, 

more like scenario # 2.

73, Lito WI6Y

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Lito - WI6Y
 

I was wondering if these specs are sufficient enough

2GB RAM
1CPU Core
50GB SSD Storage
2TB Transfer
40Gbps Network In
2000Mbps Network Out


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Roselito de los Reyes <Tolitski@...>
Sent: Wednesday, January 23, 2019 11:56 AM
To: main@DVSwitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
Hi Cort, 

more like scenario # 2.

73, Lito WI6Y

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Lito - WI6Y
 

Hi Cort, 

more like scenario # 2.

73, Lito WI6Y


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS via Groups.Io <n0mjs@...>
Sent: Wednesday, January 23, 2019 11:36 AM
To: main@dvswitch.groups.io
Cc: Steve N4IRS
Subject: Re: [DVSwitch] Master Server.
 
It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Cort N0MJS <n0mjs@...>
 

It depends entirely on how many repeaters and how many uplinks… how many TGIDs will have slot and TGID transcoded, etc.

Give me an idea of what you’re trying to achieve…. A few repeaters with no uplink would run on one core of a raspberry pi without breaking a sweat…. 50 repeaters with 15 transcoded TGIDs would be a very different story.

On Jan 23, 2019, at 1:33 PM, Roselito de los Reyes <Tolitski@...> wrote:

In your experience what would be the minimum specs for HBlink to be happy?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots. 

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Steve N4IRS
 

Boy you are quick! Took the words (some of them) out of my mouth. The HBlink sub group is at <https://dvswitch.groups.io/g/HBlink>

Steve

On 1/23/2019 2:34 PM, Cort N0MJS via Groups.Io wrote:
For anyone starting fresh with an install of just hblink.py or the traditional conference-style bridging, I would STRONGLY recommend using hblink3 and avoiding the python2 version.

All future development will be with hblink3, and there are several things in the works – from 2x faster packet processing to a real web dashboard (hbmonitor is pretty crappy).

On Jan 23, 2019, at 1:28 PM, Steve N4IRS <szingman@...> wrote:

Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots.

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206



Cort N0MJS <n0mjs@...>
 

For anyone starting fresh with an install of just hblink.py or the traditional conference-style bridging, I would STRONGLY recommend using hblink3 and avoiding the python2 version.

All future development will be with hblink3, and there are several things in the works – from 2x faster packet processing to a real web dashboard (hbmonitor is pretty crappy).

On Jan 23, 2019, at 1:28 PM, Steve N4IRS <szingman@...> wrote:

Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots.

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Cort Buffington
785-865-7206


Lito - WI6Y
 

In your experience what would be the minimum specs for HBlink to be happy?


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Wednesday, January 23, 2019 11:28 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master Server.
 
Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots.

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Steve N4IRS
 

Yes,
HBlink will act as a server for MMDVM based repeaters and hotspots.

On 1/23/2019 2:27 PM, Roselito de los Reyes wrote:
I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y


Lito - WI6Y
 

I tried applying for a master server for our group. It seems like the procedure is like Evel Knievel doing jumping jacks while doing his motorcycle jumps. Is there a way I can use the DVSwitch applications to run my own server where all the repeaters dedicated to a specific talkgroup/reflector can connect to? 

73,

Lito WI6Y