Hytera DMR Gateway
|
I know this isn't a DV Switch product, but figure it works much the same.
I deployed this to connect my Hytera repeaters into my HBlink3 instance. It has worked very well so far, but I have a small issue and have not been able to find any info on it. When I first deployed it, I set it up with just a hotspot ID and everything worked great from the test repeater at the house. The only issue was how TG's didn't disconnect after 15 mins. Typical hotspot behavior. I burned it in a couple of weeks at home and then took it to he repeater site. It is setup to pass our local TG to the cluster only and everything else goes out across BM, using TGRewrite rules, so it logs into my HBLink3 instance and BM 3102. I had a conversation with one of the BM administrators and he said let him know and he would set the ID up for a repeater. Thinking about that, I figured "Hey, my repeater ID that is already affiliated would work. The actual repeater is behind the Hytera DMR Gateway instance, so I will have IT log into BM as the old repeater ID." Once I changed this, it logged in and worked fine, but after awhile, it times out to BM and never comes back. I am pointing it to BM on port 62030 for MMDVM repeaters with passw0rd. I found this info on the BM site. I am using repeater ID 311342 which was already under "My Repeaters" Any Ideas what difference it made once I changed the ID#? I am posting my configs and logs below, maybe someone could peek at it and figure out what I may change. Again, it works fine when using a hotspot id like 311372204, but times out using 311342. Thanks, Chris DMRGateway.ini[General] Timeout=20 RptAddress=127.0.0.1 RptPort=62032 LocalAddress=127.0.0.1 LocalPort=62039 RuleTrace=0 Daemon=0 Debug=0
[Log] # Logging levels, 0=No logging DisplayLevel=1 FileLevel=1 FilePath=. FileRoot=DMRGateway
[Voice] Enabled=1 Language=de_DE Directory=/opt/DMRGateway/Audio
[XLX Network] Enabled=0 File=/opt/DMRGateway/XLXHosts.txt Port=62030 Password=passw0rd ReloadTime=60 # Local=3351 Slot=1 TG=6 Base=64000 Startup=232 Relink=180 Debug=0 Id=123456
# Brandmeister [DMR Network 1] Enabled=1 Address=????????? Port=62030 TGRewrite= PCRewrite=1 PassAllTG=1 PassAllTG=2 PassAllPC=1 Password=??????? Debug=0 Id=311342 Name=BM_United_States_3102
# WB4ULK [DMR Network 2] Enabled=1 Address=????????? Port=62036 TGRewrite=2,2,2,2,1 PCRewrite= Password=passw0rd Debug=0 Id=311372209 Name=WB4ULK_Network
# DMR+ IPSC2 OE2 [DMR Network 3] Enabled=0 Address=12.234.567.89 Port=55555 Password=PASSWORD Debug=0 Id=123456gw_hytera_mmdvm.ini#################################################################################### ## hytera_mmdvm DMRGateway Config by OE1KBC ####################################################################################
DMRGateway_address=127.0.0.1 DMRGateway_port=62039
DMRGateway_local_address=127.0.0.1 DMRGateway_local_port=62032
#################################################################################### ## hytera_mmdvm DMRGateway Repeater Ports ####################################################################################
Hytera_RPT_PORT=62005 Hytera_RPT_AUDIO_PORT=62006 Hytera_RPT_RDAC_PORT=62007
#################################################################################### ## hytera_mmdvm DMRGateway Location ####################################################################################
Location_Name=Columbus, GA Location_Latitude=+47.1234 Location_Longitude=+08.1234 Location_Homepage=http://www.wb4ulk.com Location_Watt=50 Location_CC=01
#################################################################################### # sysop mailaddress and DMR ID ####################################################################################
SYSOPEMAIL=chood73@... SYSOP_ID=3113722
Log
M: 2019-06-17 12:29:53.121 BM_United_States_3102, Opening DMR Network E: 2019-06-17 12:31:03.146 BM_United_States_3102, Connection to the master has timed out, retrying connection M: 2019-06-17 12:31:03.146 BM_United_States_3102, Closing DMR Network M: 2019-06-17 12:31:03.146 BM_United_States_3102, Opening DMR Network E: 2019-06-17 12:32:13.170 BM_United_States_3102, Connection to the master has timed out, retrying connection M: 2019-06-17 12:32:13.170 BM_United_States_3102, Closing DMR Network M: 2019-06-17 12:32:13.171 BM_United_States_3102, Opening DMR Network
|
|
|
|
Completely unrelated, but I just watched one of your videos this morning while doing dishes and commented. You're putting out great content that's easy for a beginner to follow, I like that. Though I'm not a beginner, when I watch other people's videos I try to imagine my father following the video. I admire when someone can communicate as well as you do. I hope you keep up the work.
On Mon, Jun 17, 2019, 7:52 AM Chris WB4ULK via Groups.Io <chood73=yahoo.com@groups.io> wrote: I know this isn't a DV Switch product, but figure it works much the same.
|
|
|
|
Well, thank you! Now if I can get the rest of it working. Lol
|
|
|
|
Jake Litwin
Hi Chris,
Not sure if you're still following this thread. Great video on this! I had a similar problem but found the solution. It's been working nicely. DMRGateway.ini[General] Timeout=0 <----- Changed to Zero
|
|
|
|
Chris K7AZ
Hi Jake, I am still following. Will try zero as you suggest. Was there a link to the video? When I go to use transcoder after a several day unused period, I find I have to reboot the ASL system. Have you heard of similiar ? This is running on a VM platform. Thanks, Chris K7AZ Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message -------- From: Jake Litwin <litwinjwi@...> Date: 12/9/19 20:43 (GMT-08:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] Hytera DMR Gateway Not sure if you're still following this thread. Great video on this! I had a similar problem but found the solution. It's been working nicely. DMRGateway.ini[General] Timeout=0 <----- Changed to Zero
|
|
|
|
Hi,
I am trying to connect my hytera repeater with hytera dmr gateway (I had followed the video) but it doesn't work.
The error is:
./gw_hytera_mmdvm: error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file: No such file or directory
I checked with apt but I can't find libcrypto.so.1.0.0
What can I do? 73 Marco IW0RED
|
|
|
|
EA5GVK Joaquin
Hi Marco, it is version linux.
I have running hytera gw mmdvm, perfect. the connection to the XLX by mmdvm, the audio is cut, in the direction of the XLX to the Repeater Hytera rd625 PERFECT. BUT IN SENSE REPEATER TO XLX, THE AUDIO IS CUTTED TWO SECONDS TO BEGIN. CAN YOU HELP OR GUIDE ME? thanks. Happy New Year. PD: Firmware rd625 hytera A9.00.10.100.iM
|
|
|
|
Marco IW0RED
Hi Joaquin, I don't have one raspberry 3 (it is too old) but only one
toggle quoted messageShow quoted text
raspberry 3+ that doesn't run debian Jessie. Do you have the source code of the hytera gw mmdvm software? I'm sorry but I don't use the mmdvm to xlx bridge. 73 Marco IW0RED. Happy New Year.
On Wed, Dec 25, 2019 at 11:06 AM EA5GVK Joaquin <ea5gvk@gmail.com> wrote:
--
Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------
|
|
|
|
EA5GVK Joaquin
I have tried the hytera gw with the dmrgateway. AND IT WORKS PERFECTLY TO CONNECT TO BRANDMEISTER AND DMR +
BUT HBLINK HAS PROBLEMS: If the TG of the HBLINK, in turn is linked to other systems, for example to an XLX, the audio in the direction of the HBLINK to XLX does not come out. However, in the sense of XLX to HBLINK, yes. That is HYTERA-GW -> DMRGATEWAY -> HBLINK - TGLINK TO XLX -> DOES NOT WORK. AND HOWEVER TO THE CONTRARY IF HBLINK-TG LINK TO XLX -> DMRGATEWAY -> HYTERA-GW -> WORK PERFECTLY. CAN SOMEBODY HELP ME.
|
|
|
|
Someone has a solution for this?
./gw_hytera_mmdvm: error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file: No such file or directory
I checked with apt but I can't find libcrypto.so.1.0.0
I Try to install it on a Pi3+ with raspian buster
|
|
|
|
toggle quoted messageShow quoted text
On 1/10/2020 2:38 PM, Kim-Benjamin
Lütkemeier via Groups.Io wrote:
|
|
|
|
Adrian Fewster <vk4tux@...>
Try
On 11/1/20 5:38 am, Kim-Benjamin
Lütkemeier via Groups.Io wrote:
error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file
|
|
|
|
KK4ZMG Richard
I am having some difficulties getting gw_hytera_mmdvm to work on a raspberry pi 3 running Rasbian buster. It appears to be looking for an old version of openssh-1.0.0 but buster only has openssl-1.1 so it cannot find a bunch of the library. Is there a way to update the gw_hytera_mmdvm to change it to look for the newer version of openssl?
Thanks Richard KK4zmg
|
|
|
|
Richard,
toggle quoted messageShow quoted text
We have nothing to do with gw_hytera_mmdvm. I suggest you check with the author. You might be able to so a symlink to fool gw_hytera_mmdvm. Steve N4IRS
On 5/5/20 5:07 PM, KK4ZMG Richard via
groups.io wrote:
I am having some difficulties getting gw_hytera_mmdvm to work on a raspberry pi 3 running Rasbian buster. It appears to be looking for an old version of openssh-1.0.0 but buster only has openssl-1.1 so it cannot find a bunch of the library. Is there a way to update the gw_hytera_mmdvm to change it to look for the newer version of openssl?
|
|
|
|
KK4ZMG Richard
That's what I kinda figured. Was hoping some one else ran into this. Ill try to do the sim link. Thanks
|
|
|
|
No promise that it will work, just what I would try.
toggle quoted messageShow quoted text
On 5/5/20 5:39 PM, KK4ZMG Richard via
groups.io wrote:
That's what I kinda figured. Was hoping some one else ran into this. Ill try to do the sim link. Thanks
|
|
|
|
Hi Steve can you provide info, I know it can be done, but I'm scouring the forum and I just can't find the info I need. PS see below. Hi guys I hope I"m in the right group, I am building a multimode system, ASL <-----> DMR <-----> YSF <------> P25 <------> DStar, and i will like to use DVSwitch mobile to connect to it, can anyone point me to where i will find information to achieve this? I already have ASL linked to DMR and DMR linked YSF working. Do I use HBlink for the XLX to DMR connection, and How do I connect to these Using DVswitch Mobile on my phone? Best 73 Dexter Harroo 9Y4C
On Tue, May 5, 2020, 17:29 Steve N4IRS <szingman@...> wrote:
|
|
|
|
Someone posted info on this. The idea is to use ASL to bridge
everything. Setup a node for each mode and use ASL to mix them.
toggle quoted messageShow quoted text
On 5/5/20 6:17 PM, Dexter Harroo wrote:
|
|
|
|
So I'm going to need a node for dmr one for ysf one for p25 and one for dstar. Thanks I will continue looking around for detailed info Best 73 Dexter Harroo 9Y4C
On Tue, May 5, 2020, 18:24 Steve N4IRS <szingman@...> wrote:
|
|
|
|
Dexter,
toggle quoted messageShow quoted text
Since you already started a thread asking this, I would suggest you keep your questions there. This thread had to do with a Hytera Gateway. I added some info to your thread. Steve N4IRS
On 5/5/20 6:17 PM, Dexter Harroo wrote:
|
|
|