MMDVM_Bridge Timeout
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
MMDVM_ridge is loosing connection to the Master. Have you tried another Master?
On 10/26/19 4:07 PM, Dexter Harroo wrote:
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
No didn't have to because it worked before, but i will try connecting to another TG
On Sat, Oct 26, 2019 at 4:15 PM Steve N4IRS <szingman@...> wrote:
MMDVM_ridge is loosing connection to the Master. Have you tried another Master?
On 10/26/19 4:07 PM, Dexter Harroo wrote:
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
--
73De 9Y4CDexter Harroo
so trying another TG on the same network wont make sense?
Please show the [DMR Network] stanza from MMDVM_Bridge.ini
OK, Lemme look for some info on connecting to BM
I had a very similar issue with my Rpi 3+ running HamVoIP the current version of HamVoIP + DVSwitch software. In my case, I was loosing connection to the BM Master every 70 seconds and I even created Brandmeister support ticket BMUSA-1193 . The fix? I rebooted my Raspberry Pi. I can't explain why this would be but after I did that, everything was fine. Give the reboot a try and let us know if it helps. If it does, maybe this is indicating some sort of a long run issue with DV Switch, HamVoIP's Asterisk, etc.
--David
KI6ZHD
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
I had a very similar issue with my Rpi 3+ running HamVoIP the current version of HamVoIP + DVSwitch software. In my case, I was loosing connection to the BM Master every 70 seconds and I even created Brandmeister support ticket BMUSA-1193 . The fix? I rebooted my Raspberry Pi. I can't explain why this would be but after I did that, everything was fine. Give the reboot a try and let us know if it helps. If it does, maybe this is indicating some sort of a long run issue with DV Switch, HamVoIP's Asterisk, etc.
--David
KI6ZHD
On 10/26/2019 01:07 PM, Dexter Harroo wrote:
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
Hi Dvswitchers,
I discovered for a few days this world of
digital (I hope I have a few years left to understand ... the
basics;)
First tests so with DvSwitch + DvSwitch Mobile on
Rx and if I tell you my little life here, it is because I
encounter the same problem as Dexter.
D: 2019-10-27 09:25:05.897 DMR,
Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master
successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed,
retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has
timed out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master
successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed,
retrying login ...
Or the common denominator, Raspbian?I do not think poor Raspbian is to blame, but maybe a father, a mother, or some grandparent, because I found exactly the same thing by first installing DvSwitch on my computer. .. that works under ... Ubuntu (18.04).
That's all I can add, well not quite:
Thank you very much for this forum and
sharing all this work around DvSwitch!
Philippe, f5rvx
D: 2019-10-27 09:25:05.897 DMR, Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master
successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed,
retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has timed
out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master
successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed,
retrying login ...
Or the common denominator, Raspbian?
On 10/26/2019 6:35 PM, David Ranch wrote:
I had a very similar issue with my Rpi 3+ running HamVoIP the current version of HamVoIP + DVSwitch software. In my case, I was loosing connection to the BM Master every 70 seconds and I even created Brandmeister support ticket BMUSA-1193 . The fix? I rebooted my Raspberry Pi. I can't explain why this would be but after I did that, everything was fine. Give the reboot a try and let us know if it helps. If it does, maybe this is indicating some sort of a long run issue with DV Switch, HamVoIP's Asterisk, etc.
--David
KI6ZHD
On 10/26/2019 01:07 PM, Dexter Harroo wrote:
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
Your issue is a little different unless you do get logged in for a while then loose connection.Please post your MMDVM_Bridge.ini so we can take a look.
73, Steve N4IRS
Hi Dvswitchers,
I discovered for a few days this world of digital (I hope I have a few years left to understand ... the basics;)
First tests so with DvSwitch + DvSwitch Mobile on Rx and if I tell you my little life here, it is because I encounter the same problem as Dexter.D: 2019-10-27 09:25:05.897 DMR, Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed, retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has timed out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed, retrying login ...
Or the common denominator, Raspbian?I do not think poor Raspbian is to blame, but maybe a father, a mother, or some grandparent, because I found exactly the same thing by first installing DvSwitch on my computer. .. that works under ... Ubuntu (18.04).
That's all I can add, well not quite:
Thank you very much for this forum and sharing all this work around DvSwitch!Philippe, f5rvx
D: 2019-10-27 09:25:05.897 DMR, Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed, retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has timed out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed, retrying login ...
Le 27/10/2019 à 00:37, Steve N4IRS a écrit :
Or the common denominator, Raspbian?
On 10/26/2019 6:35 PM, David Ranch wrote:
I had a very similar issue with my Rpi 3+ running HamVoIP the current version of HamVoIP + DVSwitch software. In my case, I was loosing connection to the BM Master every 70 seconds and I even created Brandmeister support ticket BMUSA-1193 . The fix? I rebooted my Raspberry Pi. I can't explain why this would be but after I did that, everything was fine. Give the reboot a try and let us know if it helps. If it does, maybe this is indicating some sort of a long run issue with DV Switch, HamVoIP's Asterisk, etc.
--David
KI6ZHD
On 10/26/2019 01:07 PM, Dexter Harroo wrote:
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
Thanks for your return Steve,
but I'm sorry : I was thinking of bringing a bit of help !!!
Please post your MMDVM_Bridge.ini so we can take a look.[General]
Callsign=F5RVX
Id=208801429
Timeout=180
Duplex=0
[Info]
RXFrequency=000000000
TXFrequency=000000000
Power=0
Latitude=47.5636
Longitude=-3.8123
Height=0
Location=Hotspot test dept 29
Description=RX only for the moment
URL=
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24
[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0
[D-Star]
Enable=0
Module=C
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
[System Fusion]
Enable=0
[P25]
Enable=0
NAC=293
[NXDN]
Enable=0
RAN=1
Id=12345
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=1
[DMR Network]
Enable=1
#Address=hblink.dvswitch.org
Address=217.182.129.131
# ( I tried different addresses in
Europe but everywhere
the same thing : connect/disconnect
)
Port=62031
Jitter=360
#Jitter=450
Local=62032
#Password=passw0rd
Password=xxxxxxxxxx
Slot1=0
#Slot1=1 is it possible to have slot1=1 AND
slot2=1? if not why ?
Slot2=1
Debug=1
[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=1
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=1
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
Best 73'
Philippe, f5rvx
Philippe,
Your issue is a little different unless you do get logged in for a while then loose connection.Please post your MMDVM_Bridge.ini so we can take a look.
73, Steve N4IRS
On 10/27/19 5:44 AM, ph.ttv@... via Groups.Io wrote:
Hi Dvswitchers,
I discovered for a few days this world of digital (I hope I have a few years left to understand ... the basics;)
First tests so with DvSwitch + DvSwitch Mobile on Rx and if I tell you my little life here, it is because I encounter the same problem as Dexter.D: 2019-10-27 09:25:05.897 DMR, Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed, retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has timed out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed, retrying login ...
Or the common denominator, Raspbian?I do not think poor Raspbian is to blame, but maybe a father, a mother, or some grandparent, because I found exactly the same thing by first installing DvSwitch on my computer. .. that works under ... Ubuntu (18.04).
That's all I can add, well not quite:
Thank you very much for this forum and sharing all this work around DvSwitch!Philippe, f5rvx
D: 2019-10-27 09:25:05.897 DMR, Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed, retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has timed out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed, retrying login ...
Le 27/10/2019 à 00:37, Steve N4IRS a écrit :
Or the common denominator, Raspbian?
On 10/26/2019 6:35 PM, David Ranch wrote:
I had a very similar issue with my Rpi 3+ running HamVoIP the current version of HamVoIP + DVSwitch software. In my case, I was loosing connection to the BM Master every 70 seconds and I even created Brandmeister support ticket BMUSA-1193 . The fix? I rebooted my Raspberry Pi. I can't explain why this would be but after I did that, everything was fine. Give the reboot a try and let us know if it helps. If it does, maybe this is indicating some sort of a long run issue with DV Switch, HamVoIP's Asterisk, etc.
--David
KI6ZHD
On 10/26/2019 01:07 PM, Dexter Harroo wrote:
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
Please show output of netstat -unap
Thanks for your return Steve,
but I'm sorry : I was thinking of bringing a bit of help !!!
Please post your MMDVM_Bridge.ini so we can take a look.[General]
Callsign=F5RVX
Id=208801429
Timeout=180
Duplex=0
[Info]
RXFrequency=000000000
TXFrequency=000000000
Power=0
Latitude=47.5636
Longitude=-3.8123
Height=0
Location=Hotspot test dept 29
Description=RX only for the moment
URL=
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24
[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0
[D-Star]
Enable=0
Module=C
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
[System Fusion]
Enable=0
[P25]
Enable=0
NAC=293
[NXDN]
Enable=0
RAN=1
Id=12345
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=1[DMR Network]
Enable=1
#Address=hblink.dvswitch.org
Address=217.182.129.131
# ( I tried different addresses in Europe but everywhere the same thing : connect/disconnect )
Port=62031
Jitter=360
#Jitter=450
Local=62032
#Password=passw0rd
Password=xxxxxxxxxx
Slot1=0
#Slot1=1 is it possible to have slot1=1 AND slot2=1? if not why ?
Slot2=1
Debug=1
[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=1
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=1
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
Best 73'
Philippe, f5rvx
Le 27/10/2019 à 11:20, Steve N4IRS a écrit :
Philippe,
Your issue is a little different unless you do get logged in for a while then loose connection.Please post your MMDVM_Bridge.ini so we can take a look.
73, Steve N4IRS
On 10/27/19 5:44 AM, ph.ttv@... via Groups.Io wrote:
Hi Dvswitchers,
I discovered for a few days this world of digital (I hope I have a few years left to understand ... the basics;)
First tests so with DvSwitch + DvSwitch Mobile on Rx and if I tell you my little life here, it is because I encounter the same problem as Dexter.D: 2019-10-27 09:25:05.897 DMR, Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed, retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has timed out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed, retrying login ...
Or the common denominator, Raspbian?I do not think poor Raspbian is to blame, but maybe a father, a mother, or some grandparent, because I found exactly the same thing by first installing DvSwitch on my computer. .. that works under ... Ubuntu (18.04).
That's all I can add, well not quite:
Thank you very much for this forum and sharing all this work around DvSwitch!Philippe, f5rvx
D: 2019-10-27 09:25:05.897 DMR, Sending authorisation
D: 2019-10-27 09:25:05.923 DMR, Sending configuration
M: 2019-10-27 09:25:05.949 DMR, Logged into the master successfully
W: 2019-10-27 09:26:05.990 DMR, Login to the master has failed, retrying login ...
E: 2019-10-27 09:27:05.994 DMR, Connection to the master has timed out, retrying connection
M: 2019-10-27 09:27:05.994 DMR, Closing DMR Network
M: 2019-10-27 09:27:05.994 DMR, Opening DMR Network
D: 2019-10-27 09:27:16.020 DMR, Sending authorisation
D: 2019-10-27 09:27:16.046 DMR, Sending configuration
M: 2019-10-27 09:27:16.071 DMR, Logged into the master successfully
W: 2019-10-27 09:28:16.105 DMR, Login to the master has failed, retrying login ...
Le 27/10/2019 à 00:37, Steve N4IRS a écrit :
Or the common denominator, Raspbian?
On 10/26/2019 6:35 PM, David Ranch wrote:
I had a very similar issue with my Rpi 3+ running HamVoIP the current version of HamVoIP + DVSwitch software. In my case, I was loosing connection to the BM Master every 70 seconds and I even created Brandmeister support ticket BMUSA-1193 . The fix? I rebooted my Raspberry Pi. I can't explain why this would be but after I did that, everything was fine. Give the reboot a try and let us know if it helps. If it does, maybe this is indicating some sort of a long run issue with DV Switch, HamVoIP's Asterisk, etc.
--David
KI6ZHD
On 10/26/2019 01:07 PM, Dexter Harroo wrote:
Hi Guys,
I have MMDVM_Bridge setup to link a DMR Talkgroup to a ysf reflector, it has been working flawlessly for quite some time, recently i started having issues with the connection where it times out.
closing DMR network
opening DMR network
Login to the master has failed, retrying network connection
closing DMR network
opening DMR network
sending autorization
sending configuration
logged into the master successfully
Login to the master has failed, retrying network connection.
and it keeps doing that over and over again, has any one else experienced this, can someone shed some light as to what may be the issue, so far i checked my ports on the router to make sure they're opened
9Y4C
Dexter
Do you have a second copy of MMDVM_Bridge running?
No ... not to my knowledge ;)
Please show output of netstat -unap
Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat PID/Program name
udp 0 0 0.0.0.0:31100 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:31103 0.0.0.0:* 1065/MMDVM_Bridge
udp 0 0 0.0.0.0:44935 0.0.0.0:* 1065/MMDVM_Bridge
udp 0 0 0.0.0.0:2470 0.0.0.0:* 1067/md380-emu
udp 0 0 0.0.0.0:50111 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:68 0.0.0.0:* 413/dhcpcd
udp 0 0 0.0.0.0:62032 0.0.0.0:* 1065/MMDVM_Bridge
udp 0 0 0.0.0.0:1194 0.0.0.0:* 555/openvpn
udp 0 0 0.0.0.0:5353 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:40744 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:36656 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:52564 0.0.0.0:* 1066/Analog_Bridge
udp6 0 0 :::53620 :::* 371/avahi-daemon: r
udp6 0 0 :::64738 :::* 1043/murmurd
udp6 0 0 :::5353 :::* 371/avahi-daemon: r
Philippe, f5rvx
Stop MMDVM_Bridge. Make sure it's stopped.
Run MMDVM_Bridge in the foreground and paste the results.
Steve
Le 27/10/2019 à 12:27, Steve N4IRS a écrit :
Do you have a second copy of MMDVM_Bridge running?
No ... not to my knowledge ;)
Please show output of netstat -unap
Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat PID/Program name
udp 0 0 0.0.0.0:31100 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:31103 0.0.0.0:* 1065/MMDVM_Bridge
udp 0 0 0.0.0.0:44935 0.0.0.0:* 1065/MMDVM_Bridge
udp 0 0 0.0.0.0:2470 0.0.0.0:* 1067/md380-emu
udp 0 0 0.0.0.0:50111 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:68 0.0.0.0:* 413/dhcpcd
udp 0 0 0.0.0.0:62032 0.0.0.0:* 1065/MMDVM_Bridge
udp 0 0 0.0.0.0:1194 0.0.0.0:* 555/openvpn
udp 0 0 0.0.0.0:5353 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:40744 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:36656 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:52564 0.0.0.0:* 1066/Analog_Bridge
udp6 0 0 :::53620 :::* 371/avahi-daemon: r
udp6 0 0 :::64738 :::* 1043/murmurd
udp6 0 0 :::5353 :::* 371/avahi-daemon: r
Philippe, f5rvx
Stop MMDVM_Bridge.
root@raspberrypi:/opt/MMDVM_Bridge# systemctl stop mmdvm_bridge
Make sure it's stopped.root@raspberrypi:/opt/MMDVM_Bridge# ps aux | grep mmdvm_bridge
root 2796 0.0 0.0 7364 524 pts/0 S+ 13:15 0:00 grep mmdvm_bridge
root@raspberrypi:/opt/MMDVM_Bridge#
Run MMDVM_Bridge in the foreground .systemctl start mmdvm_bridge (background or foreground ? I'm not sure what I do here ... )
and paste the resultsroot@raspberrypi:/opt/MMDVM_Bridge# netstat -unap
Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat PID/Program name
udp 0 0 0.0.0.0:31100 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:31103 0.0.0.0:* 2863/MMDVM_Bridge
udp 0 0 0.0.0.0:2470 0.0.0.0:* 1067/md380-emu
udp 0 0 0.0.0.0:50111 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:68 0.0.0.0:* 413/dhcpcd
udp 0 0 0.0.0.0:1194 0.0.0.0:* 555/openvpn
udp 0 0 0.0.0.0:5353 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:40744 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:36656 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:52564 0.0.0.0:* 1066/Analog_Bridge
udp6 0 0 :::53620 :::* 371/avahi-daemon: r
udp6 0 0 :::64738 :::* 1043/murmurd
udp6 0 0 :::5353 :::* 371/avahi-daemon: r
root@raspberrypi:/opt/MMDVM_Bridge#
Philippe, f5rvx
To run MMDVM_Bridge in the foreground:
systemctl stop mmdvm_bridge
cd to the directory with MMDVM_Bridge and MMDVM_Bridge.ini
./MMDVM_Bridge MMDVM_Bridge,ini
Wait a while and paste the output from MMDVM_Bridge.
Steve N4IRS
Le 27/10/2019 à 12:59, Steve N4IRS a écrit :
Stop MMDVM_Bridge.
root@raspberrypi:/opt/MMDVM_Bridge# systemctl stop mmdvm_bridge
Make sure it's stopped.root@raspberrypi:/opt/MMDVM_Bridge# ps aux | grep mmdvm_bridge
root 2796 0.0 0.0 7364 524 pts/0 S+ 13:15 0:00 grep mmdvm_bridge
root@raspberrypi:/opt/MMDVM_Bridge#
Run MMDVM_Bridge in the foreground .systemctl start mmdvm_bridge (background or foreground ? I'm not sure what I do here ... )
and paste the resultsroot@raspberrypi:/opt/MMDVM_Bridge# netstat -unap
Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat PID/Program name
udp 0 0 0.0.0.0:31100 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:31103 0.0.0.0:* 2863/MMDVM_Bridge
udp 0 0 0.0.0.0:2470 0.0.0.0:* 1067/md380-emu
udp 0 0 0.0.0.0:50111 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:68 0.0.0.0:* 413/dhcpcd
udp 0 0 0.0.0.0:1194 0.0.0.0:* 555/openvpn
udp 0 0 0.0.0.0:5353 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:40744 0.0.0.0:* 1066/Analog_Bridge
udp 0 0 0.0.0.0:36656 0.0.0.0:* 371/avahi-daemon: r
udp 0 0 0.0.0.0:52564 0.0.0.0:* 1066/Analog_Bridge
udp6 0 0 :::53620 :::* 371/avahi-daemon: r
udp6 0 0 :::64738 :::* 1043/murmurd
udp6 0 0 :::5353 :::* 371/avahi-daemon: r
root@raspberrypi:/opt/MMDVM_Bridge#
Philippe, f5rvx
I think I just understood my mistake (absurd)
1/ When I switch on my computer I run a first session in the backgroud with : systemctl stop mmdvm_bridge
2/ to see what's going on I opened a second
session ... in the foreground :
MMDVM_Bridge.ini
./MMDVM_Bridge MMDVM_Bridge.ini
I can login to the Master with the info you provided. Do you have a second copy of MMDVM_Bridge running?So your first remark was very relevant !
everything looks ok now :-)
Thank you very much for taking the
time to answer me, Steve !!!
Best 73
Philippe
ps : below the copy of what I visualize now
root@raspberrypi:/opt/MMDVM_Bridge# ./MMDVM_Bridge
MMDVM_Bridge.ini
I: 2019-10-27 12:40:13.224 MMDVM_Bridge:
I: 2019-10-27 12:40:13.224 Portions Copyright (C) 2018 DVSwitch,
INAD.
I: 2019-10-27 12:40:13.224 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-27 12:40:13.224
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-10-27 12:40:13.225 This software is for use on amateur
radio networks only,
I: 2019-10-27 12:40:13.225 it is to be used for educational
purposes only. Its use on
I: 2019-10-27 12:40:13.225 commercial networks is strictly
prohibited.
I: 2019-10-27 12:40:13.225 Copyright(C) 2015-2018 by Jonathan
Naylor, G4KLX and others
M: 2019-10-27 12:40:13.225 MMDVM_Bridge-20180423 is starting
M: 2019-10-27 12:40:13.225 Built 14:16:44 Jul 1 2019 (GitID
#43be6b4)
I: 2019-10-27 12:40:13.225 General Parameters
I: 2019-10-27 12:40:13.225 Callsign: F5RVX
I: 2019-10-27 12:40:13.225 Id: 208801429
I: 2019-10-27 12:40:13.225 Duplex: no
I: 2019-10-27 12:40:13.226 Timeout: 180s
I: 2019-10-27 12:40:13.226 D-Star: disabled
I: 2019-10-27 12:40:13.226 DMR: enabled
I: 2019-10-27 12:40:13.226 YSF: disabled
I: 2019-10-27 12:40:13.226 P25: disabled
I: 2019-10-27 12:40:13.226 NXDN: disabled
I: 2019-10-27 12:40:13.226 Modem Parameters
I: 2019-10-27 12:40:13.226 Port: /dev/null
I: 2019-10-27 12:40:13.226 RX Invert: no
I: 2019-10-27 12:40:13.226 TX Invert: no
I: 2019-10-27 12:40:13.226 PTT Invert: no
I: 2019-10-27 12:40:13.227 TX Delay: 100ms
I: 2019-10-27 12:40:13.227 RX Offset: 0Hz
I: 2019-10-27 12:40:13.227 TX Offset: 0Hz
I: 2019-10-27 12:40:13.227 RX DC Offset: 0
I: 2019-10-27 12:40:13.227 TX DC Offset: 0
I: 2019-10-27 12:40:13.227 RF Level: 100.0%
I: 2019-10-27 12:40:13.227 DMR Delay: 0 (0.0ms)
I: 2019-10-27 12:40:13.227 RX Level: 50.0%
I: 2019-10-27 12:40:13.227 CW Id TX Level: 50.0%
I: 2019-10-27 12:40:13.227 D-Star TX Level: 50.0%
I: 2019-10-27 12:40:13.228 DMR TX Level: 50.0%
I: 2019-10-27 12:40:13.228 YSF TX Level: 50.0%
I: 2019-10-27 12:40:13.228 P25 TX Level: 50.0%
I: 2019-10-27 12:40:13.228 NXDN TX Level: 50.0%
I: 2019-10-27 12:40:13.228 RX Frequency: 0Hz (0Hz)
I: 2019-10-27 12:40:13.228 TX Frequency: 0Hz (0Hz)
M: 2019-10-27 12:40:13.228 Opening the MMDVM
I: 2019-10-27 12:40:13.228 Display Parameters
I: 2019-10-27 12:40:13.229 Type:
I: 2019-10-27 12:40:13.229 DMR Network Parameters
I: 2019-10-27 12:40:13.229 Address: 217.182.129.131
I: 2019-10-27 12:40:13.229 Port: 62031
I: 2019-10-27 12:40:13.229 Local: 62032
I: 2019-10-27 12:40:13.229 Jitter: 360ms
I: 2019-10-27 12:40:13.229 Slot 1: disabled
I: 2019-10-27 12:40:13.229 Slot 2: enabled
I: 2019-10-27 12:40:13.229 Mode Hang: 3s
I: 2019-10-27 12:40:13.230 Info Parameters
I: 2019-10-27 12:40:13.230 Callsign: F5RVX
I: 2019-10-27 12:40:13.230 RX Frequency: 0Hz
I: 2019-10-27 12:40:13.230 TX Frequency: 0Hz
I: 2019-10-27 12:40:13.230 Power: 0W
I: 2019-10-27 12:40:13.230 Latitude: 47.563599deg N
I: 2019-10-27 12:40:13.230 Longitude: -3.812300deg E
I: 2019-10-27 12:40:13.230 Height: 0m
I: 2019-10-27 12:40:13.230 Location: "Hotspot test dept 29 "
I: 2019-10-27 12:40:13.230 Description: "RX only for the
moment"
I: 2019-10-27 12:40:13.231 URL: ""
M: 2019-10-27 12:40:13.231 DMR, Opening DMR Network
I: 2019-10-27 12:40:13.231 RSSI
I: 2019-10-27 12:40:13.231 Mapping File: RSSI.dat
W: 2019-10-27 12:40:13.231 Cannot open the RSSI data file -
RSSI.dat
I: 2019-10-27 12:40:13.231 DMR Id Lookups
I: 2019-10-27 12:40:13.231 File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-27 12:40:13.231 Reload: 24 hours
I: 2019-10-27 12:40:14.020 Loaded 146882 Ids to the DMR callsign
lookup table
I: 2019-10-27 12:40:14.020 DMR RF Parameters
I: 2019-10-27 12:40:14.020 Started the DMR Id lookup reload thread
I: 2019-10-27 12:40:14.020 Id: 208801429
I: 2019-10-27 12:40:14.020 Color Code: 1
I: 2019-10-27 12:40:14.020 Self Only: no
I: 2019-10-27 12:40:14.020 Embedded LC Only: yes
I: 2019-10-27 12:40:14.020 Dump Talker Alias Data: no
I: 2019-10-27 12:40:14.021 Prefixes: 0
I: 2019-10-27 12:40:14.021 Call Hang: 3s
I: 2019-10-27 12:40:14.021 TX Hang: 3s
I: 2019-10-27 12:40:14.021 Mode Hang: 10s
M: 2019-10-27 12:40:14.021 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] Address ->
127.0.0.1
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] TXPort -> 31100
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] RXPort -> 31103
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] Slot -> 2
M: 2019-10-27 12:40:14.021 DMR, Transmitting on 127.0.0.1:31100
and listening on port 31103. Result = 1
M: 2019-10-27 12:40:14.021 MMDVM_Bridge-20180423 is running
D: 2019-10-27 12:40:24.045 DMR, Sending authorisation
D: 2019-10-27 12:40:24.071 DMR, Sending configuration
M: 2019-10-27 12:40:24.091 DMR, Logged into the master
successfully
D: 2019-10-27 12:41:52.838 Network Received
D: 2019-10-27 12:41:52.838 0000: 44 4D 52 44 00 1F BD 3A 00 08 20
0C 72 0E 95 A1 *DMRD...:.. .r...*
D: 2019-10-27 12:41:52.838 0010: 00 00 00 00 0B E4 05 8E 0D E0 2A
20 28 10 C7 00 *..........* (...*
[...]
D: 2019-10-27 12:50:10.940 0030: 46 40 A7 81 5A 00
00 *F@..Z..*
M: 2019-10-27 12:50:10.940 DMR Slot 2, received network end of
voice transmission, 0.1 seconds, 0% packet loss, BER: 0.0%
[...]
(no further disconnections)
Great to hear. You are not the first, nor will you be the last to get caught by that.
73, Steve N4IRS
I think I just understood my mistake (absurd)
1/ When I switch on my computer I run a first session in the backgroud with : systemctl stop mmdvm_bridge
2/ to see what's going on I opened a second session ... in the foreground : MMDVM_Bridge.ini
./MMDVM_Bridge MMDVM_Bridge.ini
I can login to the Master with the info you provided. Do you have a second copy of MMDVM_Bridge running?So your first remark was very relevant !
everything looks ok now :-)
Thank you very much for taking the time to answer me, Steve !!!Best 73
Philippe
ps : below the copy of what I visualize now
root@raspberrypi:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2019-10-27 12:40:13.224 MMDVM_Bridge:
I: 2019-10-27 12:40:13.224 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-10-27 12:40:13.224 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-27 12:40:13.224 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-10-27 12:40:13.225 This software is for use on amateur radio networks only,
I: 2019-10-27 12:40:13.225 it is to be used for educational purposes only. Its use on
I: 2019-10-27 12:40:13.225 commercial networks is strictly prohibited.
I: 2019-10-27 12:40:13.225 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-10-27 12:40:13.225 MMDVM_Bridge-20180423 is starting
M: 2019-10-27 12:40:13.225 Built 14:16:44 Jul 1 2019 (GitID #43be6b4)
I: 2019-10-27 12:40:13.225 General Parameters
I: 2019-10-27 12:40:13.225 Callsign: F5RVX
I: 2019-10-27 12:40:13.225 Id: 208801429
I: 2019-10-27 12:40:13.225 Duplex: no
I: 2019-10-27 12:40:13.226 Timeout: 180s
I: 2019-10-27 12:40:13.226 D-Star: disabled
I: 2019-10-27 12:40:13.226 DMR: enabled
I: 2019-10-27 12:40:13.226 YSF: disabled
I: 2019-10-27 12:40:13.226 P25: disabled
I: 2019-10-27 12:40:13.226 NXDN: disabled
I: 2019-10-27 12:40:13.226 Modem Parameters
I: 2019-10-27 12:40:13.226 Port: /dev/null
I: 2019-10-27 12:40:13.226 RX Invert: no
I: 2019-10-27 12:40:13.226 TX Invert: no
I: 2019-10-27 12:40:13.226 PTT Invert: no
I: 2019-10-27 12:40:13.227 TX Delay: 100ms
I: 2019-10-27 12:40:13.227 RX Offset: 0Hz
I: 2019-10-27 12:40:13.227 TX Offset: 0Hz
I: 2019-10-27 12:40:13.227 RX DC Offset: 0
I: 2019-10-27 12:40:13.227 TX DC Offset: 0
I: 2019-10-27 12:40:13.227 RF Level: 100.0%
I: 2019-10-27 12:40:13.227 DMR Delay: 0 (0.0ms)
I: 2019-10-27 12:40:13.227 RX Level: 50.0%
I: 2019-10-27 12:40:13.227 CW Id TX Level: 50.0%
I: 2019-10-27 12:40:13.227 D-Star TX Level: 50.0%
I: 2019-10-27 12:40:13.228 DMR TX Level: 50.0%
I: 2019-10-27 12:40:13.228 YSF TX Level: 50.0%
I: 2019-10-27 12:40:13.228 P25 TX Level: 50.0%
I: 2019-10-27 12:40:13.228 NXDN TX Level: 50.0%
I: 2019-10-27 12:40:13.228 RX Frequency: 0Hz (0Hz)
I: 2019-10-27 12:40:13.228 TX Frequency: 0Hz (0Hz)
M: 2019-10-27 12:40:13.228 Opening the MMDVM
I: 2019-10-27 12:40:13.228 Display Parameters
I: 2019-10-27 12:40:13.229 Type:
I: 2019-10-27 12:40:13.229 DMR Network Parameters
I: 2019-10-27 12:40:13.229 Address: 217.182.129.131
I: 2019-10-27 12:40:13.229 Port: 62031
I: 2019-10-27 12:40:13.229 Local: 62032
I: 2019-10-27 12:40:13.229 Jitter: 360ms
I: 2019-10-27 12:40:13.229 Slot 1: disabled
I: 2019-10-27 12:40:13.229 Slot 2: enabled
I: 2019-10-27 12:40:13.229 Mode Hang: 3s
I: 2019-10-27 12:40:13.230 Info Parameters
I: 2019-10-27 12:40:13.230 Callsign: F5RVX
I: 2019-10-27 12:40:13.230 RX Frequency: 0Hz
I: 2019-10-27 12:40:13.230 TX Frequency: 0Hz
I: 2019-10-27 12:40:13.230 Power: 0W
I: 2019-10-27 12:40:13.230 Latitude: 47.563599deg N
I: 2019-10-27 12:40:13.230 Longitude: -3.812300deg E
I: 2019-10-27 12:40:13.230 Height: 0m
I: 2019-10-27 12:40:13.230 Location: "Hotspot test dept 29 "
I: 2019-10-27 12:40:13.230 Description: "RX only for the moment"
I: 2019-10-27 12:40:13.231 URL: ""
M: 2019-10-27 12:40:13.231 DMR, Opening DMR Network
I: 2019-10-27 12:40:13.231 RSSI
I: 2019-10-27 12:40:13.231 Mapping File: RSSI.dat
W: 2019-10-27 12:40:13.231 Cannot open the RSSI data file - RSSI.dat
I: 2019-10-27 12:40:13.231 DMR Id Lookups
I: 2019-10-27 12:40:13.231 File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-27 12:40:13.231 Reload: 24 hours
I: 2019-10-27 12:40:14.020 Loaded 146882 Ids to the DMR callsign lookup table
I: 2019-10-27 12:40:14.020 DMR RF Parameters
I: 2019-10-27 12:40:14.020 Started the DMR Id lookup reload thread
I: 2019-10-27 12:40:14.020 Id: 208801429
I: 2019-10-27 12:40:14.020 Color Code: 1
I: 2019-10-27 12:40:14.020 Self Only: no
I: 2019-10-27 12:40:14.020 Embedded LC Only: yes
I: 2019-10-27 12:40:14.020 Dump Talker Alias Data: no
I: 2019-10-27 12:40:14.021 Prefixes: 0
I: 2019-10-27 12:40:14.021 Call Hang: 3s
I: 2019-10-27 12:40:14.021 TX Hang: 3s
I: 2019-10-27 12:40:14.021 Mode Hang: 10s
M: 2019-10-27 12:40:14.021 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] TXPort -> 31100
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] RXPort -> 31103
M: 2019-10-27 12:40:14.021 DMR, Setting [DMR] Slot -> 2
M: 2019-10-27 12:40:14.021 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103. Result = 1
M: 2019-10-27 12:40:14.021 MMDVM_Bridge-20180423 is running
D: 2019-10-27 12:40:24.045 DMR, Sending authorisation
D: 2019-10-27 12:40:24.071 DMR, Sending configuration
M: 2019-10-27 12:40:24.091 DMR, Logged into the master successfully
D: 2019-10-27 12:41:52.838 Network Received
D: 2019-10-27 12:41:52.838 0000: 44 4D 52 44 00 1F BD 3A 00 08 20 0C 72 0E 95 A1 *DMRD...:.. .r...*
D: 2019-10-27 12:41:52.838 0010: 00 00 00 00 0B E4 05 8E 0D E0 2A 20 28 10 C7 00 *..........* (...*
[...]D: 2019-10-27 12:50:10.940 0030: 46 40 A7 81 5A 00 00 *F@..Z..*
M: 2019-10-27 12:50:10.940 DMR Slot 2, received network end of voice transmission, 0.1 seconds, 0% packet loss, BER: 0.0%
[...]
(no further disconnections)