HBLink and DMRLink
Steve Siesel [K4KSA]
I am running Allstar<>Analog_Bridge<>HB_Bridge, as an Analog to DMR Gateway. It is still in the testing phase as I still need to find a solution to keep Allison from talking out on DMR. I have been working with Steve on this, and hope to work it out soon!
Here is mine from 2600 test.toggle quoted messageShow quoted text
; USRP from Analog_bridge
rxchannel = USRP/127.0.0.1:34001:32001 ; GNU Radio interface USRP
duplex = 0 ; 0 = Half duplex with no telemetry tones or hang time.
hangtime = 0 ; squelch tail hang time 0
althangtime = 0 ; longer squelch tail hang time 0
holdofftelem = 1 ; Hold off all telemetry when signal is present on receiver or from connected nodes
; except when an ID needs to be done and there is a signal coming from a connected node.
telemdefault = 0 ; 0 = telemetry output off. Don't send Allison to DMR !!!!!!!!!!!!!!!!! Trust me.
telemdynamic = 0 ; 0 = disallow users to change the local telemetry setting with a COP command,
linktolink = no ; disables forcing physical half-duplex operation of main repeater while
; still keeping half-duplex semantics (optional)
; idrecording = |iWA4XYZ/R ; id recording or morse string see http://ohnosec.org/drupal/node/87
; idtalkover = |iWA4XYZ ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129
rxchannel = dahdi/pseudo ; No radio (hub)
On 07/01/2017 04:32 PM, Steve Siesel [K4KSA] wrote:
I would like connect my AllStar Node to HBLINK Server
My ASL Node is #50941 and HBLink Belgium is on 18.104.22.168
How can I do that?
Can you help me ?
73 Paul, ON6DP
My node ASL 40446 is connected to my own HB Link server. I use HBlink3 and this is how I did it.
ASL 40446 <-> USRP 1001 <-> Analog Bridge <-> MMDVM Bridge <-> HBlink3
Please note that HB Link Belgium may have a password set up on their HB server. You may need to get this info from them so you can configure your MMDVM Bridge.