Date
1 - 4 of 4
ASL to DMR Bridge how to on Raspberry Pi #best_practices
|
Ted Lawrence
Greetings folks!
I have a Raspberry pi node configured ASL to DMR Bridge. I do not have any radio on this node 505501. The node is stand alone, used to connect to other remote base nodes to our DMR Local TG 315136. As such, I am not clear on the best practice for the node parameters. For example, should the rxchannel = SimpleUSB/usb_505501 be commented out. As if so, what other recommended parameters should be made. Thanks! Ted KD4EG
|
|
|
|
toggle quoted messageShow quoted text
On 11/27/19 7:32 PM, Ted Lawrence via
Groups.Io wrote:
Greetings folks!
|
|
|
|
Ted Lawrence
Thanks for responding Steve! Very good on the [1999] Parameters. All is good with [1999] parameters. All is working and passing audio to and from DMR. Just not sure about the my node 505501. It's not connected to any hardware.
|
|
|
|
Ted,
toggle quoted messageShow quoted text
This is how ASL rpt.conf is as "shipped" ; Enable the selected channel driver in modules.conf !!! rxchannel = dahdi/pseudo ; No radio (hub) ; rxchannel = SimpleUSB/usb_1999 ; SimpleUSB ; rxchannel = Pi/1 ; Raspberry Pi PiTA ; rxchannel = Radio/usb_1999 ; USBRadio (DSP) ; rxchannel = Dahdi/1 ; PCI Quad card ; rxchannel = Beagle/1 ; BeagleBoard ; rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP
On 11/27/19 7:47 PM, Ted Lawrence via
Groups.Io wrote:
Thanks for responding Steve! Very good on the [1999] Parameters. All is good with [1999] parameters. All is working and passing audio to and from DMR. Just not sure about the my node 505501. It's not connected to any hardware.
|
|
|