UDP Address issues


Pete Fierro
 

   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB




Steve N4IRS
 

If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





Pete Fierro
 

  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





JJ Cummings
 

The commands that Steve gave you only help find the problem, and when you issued the command it shows that MMDVM_Bridge is indeed already running and listening on that port...  so now you need to kill that process or stop the service.

sudo systemctl stop mmdvm_bridge.service

if that doesn't work

sudo kill 563

(if you are logged in as root you can omit the sudo)


On Sun, Mar 29, 2020 at 9:46 AM Pete Fierro via Groups.Io <overthetop52=yahoo.com@groups.io> wrote:
  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





Pete Fierro
 

JJ

  That did it!!!!Thanks so much&73 very greatful!

Pete
KD2ARB


On Sun, Mar 29, 2020 at 11:54, JJ Cummings
<cummingsj@...> wrote:
The commands that Steve gave you only help find the problem, and when you issued the command it shows that MMDVM_Bridge is indeed already running and listening on that port...  so now you need to kill that process or stop the service.

sudo systemctl stop mmdvm_bridge.service

if that doesn't work

sudo kill 563

(if you are logged in as root you can omit the sudo)


On Sun, Mar 29, 2020 at 9:46 AM Pete Fierro via Groups.Io <overthetop52=yahoo.com@groups.io> wrote:
  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





Pete Fierro
 

Thanks to Steve as well..73 KD2ARB


On Sun, Mar 29, 2020 at 12:09, Pete Fierro via Groups.Io
<overthetop52@...> wrote:
JJ

  That did it!!!!Thanks so much&73 very greatful!

Pete
KD2ARB


On Sun, Mar 29, 2020 at 11:54, JJ Cummings
<cummingsj@...> wrote:
The commands that Steve gave you only help find the problem, and when you issued the command it shows that MMDVM_Bridge is indeed already running and listening on that port...  so now you need to kill that process or stop the service.

sudo systemctl stop mmdvm_bridge.service

if that doesn't work

sudo kill 563

(if you are logged in as root you can omit the sudo)


On Sun, Mar 29, 2020 at 9:46 AM Pete Fierro via Groups.Io <overthetop52=yahoo.com@groups.io> wrote:
  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB