Good evening everyone,
toggle quoted messageShow quoted text
That is correct. You will need IPSC-Bridge and HB-Bridge. The IPSC-Bridge will need to connect to your "System" on the DMRlink server. And the HB-Link will need to connect to a "system" on your HB-Link server.
You will one get 2 time slots of communication. It will be first come first serve for the TG. So you may get a bottle neck if you run a bunch of TG to multiple repeaters.
The data flow will look kinda like this.
HBlink -> (single port number) -> HB-Bridge -> (2 diffrent port numbers) -> IPSC-Bridge -> (single port number) -> DMRlink.
In the hbink.cfg and the DMRlink.cfg files you need to set up the Master or the peer to connect to the respective server (HBlink/DMRlink). Then check and edit the HB-Bringe.cfg IPSC-Bridge.cfg file and make shore the 2 ports are 2 diffrent numbers and reversed from echother.
To 4321. To 1234
From 1234. From 4321
Start them both you should be good to go. HB-Bridge.py, IPSC-Bridge.py
On Sat, Apr 4, 2020, 7:13 PM Roberto Pischianz <roberto@...> wrote: