Topics

YSFReflector to Allstarlink


honda5603@...
 

What's the easiest way to bridge both of these together? 


Steve N4IRS
 

Follow this and change MMDVM_Bridge.ini to YSF from DMR.
<https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit>

Steve N4IRS

On 5/13/2020 10:01 AM, honda5603@... wrote:
What's the easiest way to bridge both of these together? 


honda5603@...
 

Thanks Steve for the information I just confirmed DMR, but need to swap everything to YSF?


Steve N4IRS
 

Yes, enable YSF and YSF networking in MMDVM_Bridge and move Analog_Bridge.ini from DMR to YSF. Also, point Analog_Bridge.ini at the proper ports in DVSwitch.ini

On 5/13/2020 11:10 AM, honda5603@... wrote:
Thanks Steve for the information I just confirmed DMR, but need to swap everything to YSF?


honda5603@...
 

Thanks Steve again for helping me.  Here's what I was able to capture:

Here's analog bridge ini:


; Analog_Bridge configuration file.
;   This file should be placed in either /etc or it can be
;   supplied as a path on the Analog_Bridge command line.

; The best way to think of this file is that there are two main sections, the USRP (analog audi$
; AMBE_AUDIO (compressed audio).  Analog_Bridge will take everything sent to the USRP port and
; encode it for transmission on the AMBE_AUDIO port.  The encoder will use the format defined i$
; As you might expect, the reverse direction is defined too.

; Analog_Bridge supports include files. More on this later...
include = dvsm.macro
; include = asl.macro

; General Section describes settings for Analog_Bridge itself.
[GENERAL]
logLevel = 2                            ; Show messages and above 0=No logging, 1=Debug, 2=Mess$

; Metadata management
subscriberFile = /var/lib/dvswitch/subscriber_ids.csv   ; DMR ID to callsign lookup data
exportMetadata = true                   ; Export metadata to USRP partner (transcode setups req$

; General vocoder setup information
decoderFallBack = true                  ; Allow software AMBE decoding if a hardware decoder is$
useEmulator = false                     ; Use the MD380 AMBE emulator for AMBE72 (DMR/YSFN/NXDN)
emulatorAddress = 127.0.0.1:2470        ; IP address and port of the md380 server

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 35103                          ; Transmit TLV frames to partner on this port
rxPort = 35100                          ; Listen for TLV frames from partner on this port
ambeMode = YSFN                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode $
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)

; The metadata below is used when ASL is the source since it does not have any concept of digit$
gatewayDmrId = 3118583                  ; ID to use when transmitting from Analog_Bridge
repeaterID = 311858301                  ; ID of source repeater
txTg = 37921                          ; TG to use for all frames sent from Analog_Bridge -> xx_$
txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_$
colorCode = 1                           ; Color Code to assign DMR frames

; Information for USRP channel driver.  This interface uses PCM to transfer audio information
; There are two typical configurations, ASL and Transcode.  ASL (AllstarLink) is for analog cli$
; to a digital network.  Transcode is when Analog_Bridge actually points its PCM interfaces bac$
; causing a TLV <-- (pcm <--> pcm) --> TLV type of architecture.
;   When using ASL, this matches the rpt.conf ASL file with a setting like:
;   rxchannel = usrp/127.0.0.1:34001:32001
;   When Transcoding, make two ini files and set txPort equal to the other instance rxPort (cro$
;   each instance with its own ini file.
[USRP]
address = 127.0.0.1                     ; IP address of USRP partner (Allstar/Asterisk or anoth$
txPort = 35103                          ; Transmit USRP frames on this port
rxPort = 33510                          ; Listen for USRP frames on this port
usrpAudio = AUDIO_UNITY                 ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_G$
usrpGain = 1.10                         ; Gain (in db) of the AGC filter
tlvAudio = AUDIO_UNITY                  ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BP$
tlvGain = 0.35                          ; Gain factor of audio from ASL (0.0-1.0)

Here is the DVSwitch.ini file:



  GNU nano 2.7.4                          File: DVSwitch.ini

; MMDVM_Bridge export / import configuration file.
;   This file should be placed along side of MMDVM_Bridge or it can be
;   supplied as a path on the MMDVM_BRIDGE environment variable.

; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
logFilePath = /var/log/Quantar_Bridge.log
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 34103                  ; Port to send AMBE TLV frames to (export)
RXPort = 34100                  ; Port to listen on (import)
quantarPort = 1994              ; HDLC frames To/From the Quantar repeater
logLevel = 2                    ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=I$
debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot

; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 32100                  ; Port to send AMBE TLV frames to (export)
RXPort = 32103                  ; Port to listen on (import)
FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, expor$
ExportTG = 9                    ; Which TG to export
Slot = 2                        ; Export slot

; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 33100                  ; Port to send AMBE TLV frames to (export)
RXPort = 33103                  ; Port to listen on (import)
FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, expor$
NXDNFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database
Translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)
Slot = 2                        ; Export slot

; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 34100                  ; Port to send AMBE TLV frames to (export)
RXPort = 34103                  ; Port to listen on (import)
Slot = 2                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, expor$
ExportTG = 1234                 ; Which TG to export
Slot = 2                        ; Export slot


And then the MMDVM_Bridge.ini:


[General]
Callsign=KC9HTA
Id=311858301
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0

[D-Star]
Enable=0
Module=C

[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=0

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=3108.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options$
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0






Steve N4IRS
 

All looks good except in MMDVM_Bridge.ini:

[System Fusion]
Enable=0 <----------------- Enable this

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org <-------------- this is the dns entry or IP of the reflector
GatewayPort=42166 <---------- This is the port number the reflector is listening on.
Debug=0


On 5/13/2020 11:50 AM, honda5603@... wrote:
Thanks Steve again for helping me.  Here's what I was able to capture:

Here's analog bridge ini:


; Analog_Bridge configuration file.
;   This file should be placed in either /etc or it can be
;   supplied as a path on the Analog_Bridge command line.

; The best way to think of this file is that there are two main sections, the USRP (analog audi$
; AMBE_AUDIO (compressed audio).  Analog_Bridge will take everything sent to the USRP port and
; encode it for transmission on the AMBE_AUDIO port.  The encoder will use the format defined i$
; As you might expect, the reverse direction is defined too.

; Analog_Bridge supports include files. More on this later...
include = dvsm.macro
; include = asl.macro

; General Section describes settings for Analog_Bridge itself.
[GENERAL]
logLevel = 2                            ; Show messages and above 0=No logging, 1=Debug, 2=Mess$

; Metadata management
subscriberFile = /var/lib/dvswitch/subscriber_ids.csv   ; DMR ID to callsign lookup data
exportMetadata = true                   ; Export metadata to USRP partner (transcode setups req$

; General vocoder setup information
decoderFallBack = true                  ; Allow software AMBE decoding if a hardware decoder is$
useEmulator = false                     ; Use the MD380 AMBE emulator for AMBE72 (DMR/YSFN/NXDN)
emulatorAddress = 127.0.0.1:2470        ; IP address and port of the md380 server

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 35103                          ; Transmit TLV frames to partner on this port
rxPort = 35100                          ; Listen for TLV frames from partner on this port
ambeMode = YSFN                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode $
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)

; The metadata below is used when ASL is the source since it does not have any concept of digit$
gatewayDmrId = 3118583                  ; ID to use when transmitting from Analog_Bridge
repeaterID = 311858301                  ; ID of source repeater
txTg = 37921                          ; TG to use for all frames sent from Analog_Bridge -> xx_$
txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_$
colorCode = 1                           ; Color Code to assign DMR frames

; Information for USRP channel driver.  This interface uses PCM to transfer audio information
; There are two typical configurations, ASL and Transcode.  ASL (AllstarLink) is for analog cli$
; to a digital network.  Transcode is when Analog_Bridge actually points its PCM interfaces bac$
; causing a TLV <-- (pcm <--> pcm) --> TLV type of architecture.
;   When using ASL, this matches the rpt.conf ASL file with a setting like:
;   rxchannel = usrp/127.0.0.1:34001:32001
;   When Transcoding, make two ini files and set txPort equal to the other instance rxPort (cro$
;   each instance with its own ini file.
[USRP]
address = 127.0.0.1                     ; IP address of USRP partner (Allstar/Asterisk or anoth$
txPort = 35103                          ; Transmit USRP frames on this port
rxPort = 33510                          ; Listen for USRP frames on this port
usrpAudio = AUDIO_UNITY                 ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_G$
usrpGain = 1.10                         ; Gain (in db) of the AGC filter
tlvAudio = AUDIO_UNITY                  ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BP$
tlvGain = 0.35                          ; Gain factor of audio from ASL (0.0-1.0)

Here is the DVSwitch.ini file:



  GNU nano 2.7.4                          File: DVSwitch.ini

; MMDVM_Bridge export / import configuration file.
;   This file should be placed along side of MMDVM_Bridge or it can be
;   supplied as a path on the MMDVM_BRIDGE environment variable.

; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
logFilePath = /var/log/Quantar_Bridge.log
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 34103                  ; Port to send AMBE TLV frames to (export)
RXPort = 34100                  ; Port to listen on (import)
quantarPort = 1994              ; HDLC frames To/From the Quantar repeater
logLevel = 2                    ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=I$
debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot

; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 32100                  ; Port to send AMBE TLV frames to (export)
RXPort = 32103                  ; Port to listen on (import)
FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, expor$
ExportTG = 9                    ; Which TG to export
Slot = 2                        ; Export slot

; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 33100                  ; Port to send AMBE TLV frames to (export)
RXPort = 33103                  ; Port to listen on (import)
FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, expor$
NXDNFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database
Translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)
Slot = 2                        ; Export slot

; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 34100                  ; Port to send AMBE TLV frames to (export)
RXPort = 34103                  ; Port to listen on (import)
Slot = 2                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, expor$
ExportTG = 1234                 ; Which TG to export
Slot = 2                        ; Export slot


And then the MMDVM_Bridge.ini:


[General]
Callsign=KC9HTA
Id=311858301
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0

[D-Star]
Enable=0
Module=C

[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=0

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=3108.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options$
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0







honda5603@...
 

Thanks again, I changed all of these options.  I can connect my normal public node (51505) to the private node (1999), but not seeing a connection to YSFdashboard: russell9.com:1234

Is there a place to check if YSF side is indeed connecting for troubleshooting?


Steve N4IRS
 

Watch the MMDVM_ Bridge log in /var/log/mmdvm

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of honda5603@... <honda5603@...>
Sent: Wednesday, May 13, 2020 12:19:42 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] YSFReflector to Allstarlink
 
Thanks again, I changed all of these options.  I can connect my normal public node (51505) to the private node (1999), but not seeing a connection to YSFdashboard: russell9.com:1234

Is there a place to check if YSF side is indeed connecting for troubleshooting?


honda5603@...
 

I: 2020-05-13 16:21:21.992 YSF RF Parameters
I: 2020-05-13 16:21:21.992     Low Deviation: no
I: 2020-05-13 16:21:21.992     Remote Gateway: no
I: 2020-05-13 16:21:21.992     Self Only: no
I: 2020-05-13 16:21:21.992     DSQ: no
I: 2020-05-13 16:21:21.992     Mode Hang: 10s
M: 2020-05-13 16:21:21.992 YSF, Opening INI file: DVSwitch.ini
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] TXPort -> 35100
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] RXPort -> 35103
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] FallbackID -> 1234567
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] ExportTG -> 1234
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] Slot -> 2
E: 2020-05-13 16:21:21.993 Cannot bind the UDP address, err: 98
F: 2020-05-13 16:21:21.993 YSF, Can not open listener port 35103

ks only,
I: 2020-05-13 16:22:32.248 it is to be used for educational purposes only.
Its use on
I: 2020-05-13 16:22:32.248 commercial networks is strictly prohibited.
I: 2020-05-13 16:22:32.248
I: 2020-05-13 16:22:32.248 Analog_Bridge is starting
M: 2020-05-13 16:22:32.249 Setting [MACROS] DMR -> /opt/Analog_Bridge/dvswitch.sh mode DMR
M: 2020-05-13 16:22:32.249 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/dvswitch.sh mode DSTAR
M: 2020-05-13 16:22:32.249 Setting [MACROS] NXDN -> /opt/Analog_Bridge/dvswitch.sh mode NXDN
M: 2020-05-13 16:22:32.249 Setting [MACROS] P25 -> /opt/Analog_Bridge/dvswitch.sh mode P25
M: 2020-05-13 16:22:32.249 Setting [MACROS] YSF -> /opt/Analog_Bridge/dvswitch.sh mode YSF
M: 2020-05-13 16:22:32.249 Setting [MACROS] dbupdate -> /opt/Analog_Bridge/dvswitch.sh collectProcessPushDataFiles
M: 2020-05-13 16:22:32.249 Setting [MACROS] 9876 -> /opt/Analog_Bridge/parrot.sh
M: 2020-05-13 16:22:32.249 Setting [] include -> dvsm.macro
M: 2020-05-13 16:22:32.249 Setting [GENERAL] logLevel -> 2
M: 2020-05-13 16:22:32.249 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2020-05-13 16:22:32.249 Setting [GENERAL] exportMetadata -> true
M: 2020-05-13 16:22:32.249 Setting [GENERAL] decoderFallBack -> true
M: 2020-05-13 16:22:32.249 Setting [GENERAL] useEmulator -> false
M: 2020-05-13 16:22:32.250 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] txPort -> 35103
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] rxPort -> 35100
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] ambeMode -> YSFN
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] gatewayDmrId -> 3118583
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] repeaterID -> 311858301
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] txTg -> 37921
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] txTs -> 2
M: 2020-05-13 16:22:32.250 Setting [AMBE_AUDIO] colorCode -> 1
M: 2020-05-13 16:22:32.250 Setting [USRP] address -> 127.0.0.1
M: 2020-05-13 16:22:32.250 Setting [USRP] txPort -> 35103
M: 2020-05-13 16:22:32.250 Setting [USRP] rxPort -> 33510
M: 2020-05-13 16:22:32.250 Setting [USRP] usrpAudio -> AUDIO_UNITY
M: 2020-05-13 16:22:32.250 Setting [USRP] usrpGain -> 1.10
M: 2020-05-13 16:22:32.251 Setting [USRP] tlvAudio -> AUDIO_UNITY
M: 2020-05-13 16:22:32.251 Setting [USRP] tlvGain -> 0.35
M: 2020-05-13 16:22:32.251 Setting [DV3000] address -> 127.0.0.1
M: 2020-05-13 16:22:32.251 Setting [DV3000] rxPort -> 2460
I: 2020-05-13 16:22:32.251 Open UDP listener on 127.0.0.1:35100
I: 2020-05-13 16:22:32.251 Open USRP on 127.0.0.1:35103
M: 2020-05-13 16:22:32.251 Connecting to DV3000 hardware......
W: 2020-05-13 16:22:33.261 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2020-05-13 16:22:33.338 Subscriber IDs loaded: 93908
I: 2020-05-13 16:22:33.339 Default extended metadata <KC9HTA>
W: 2020-05-13 16:22:33.339 Using software MBE decoder version 1.2.3
W: 2020-05-13 16:22:33.339 Using software OP25 IMBE/AMBE vocoder
I: 2020-05-13 16:22:33.339 Connected to USRP 127.0.0.1:35103
I: 2020-05-13 16:22:33.339 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2020-05-13 16:22:33.339 Starting USRP --> Analog_Bridge (encoder) -> TLV thread


honda5603@...
 

root@nwr-asl:/var/log# ls
alternatives.log   btmp          dvswitch    messages    syslog.2.gz  wtmp
Analog_Bridge.log  daemon.log    faillog     messages.1  syslog.3.gz
apt                daemon.log.1  installer   mmdvm       syslog.4.gz
asterisk           debug         kern.log    netcheck    syslog.5.gz
auth.log           debug.1       kern.log.1  syslog      syslog.6.gz
auth.log.1         dpkg.log      lastlog     syslog.1    syslog.7.gz
root@nwr-asl:/var/log#


I don't see a log file....hmmmm


honda5603@...
 

I: 2020-05-13 16:21:21.769 System Fusion Network Parameters
I: 2020-05-13 16:21:21.769     Local Address: 127.0.0.1
I: 2020-05-13 16:21:21.769     Local Port: 3200
I: 2020-05-13 16:21:21.769     Gateway Address: russell9.com
I: 2020-05-13 16:21:21.769     Gateway Port: 42000
I: 2020-05-13 16:21:21.769     Mode Hang: 3s
M: 2020-05-13 16:21:21.847 Opening YSF network connection
I: 2020-05-13 16:21:21.847 RSSI
I: 2020-05-13 16:21:21.847     Mapping File: RSSI.dat
W: 2020-05-13 16:21:21.847 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-13 16:21:21.847 DMR Id Lookups
I: 2020-05-13 16:21:21.848     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-13 16:21:21.848     Reload: 24 hours
I: 2020-05-13 16:21:21.992 Loaded 164254 Ids to the DMR callsign lookup ta$
I: 2020-05-13 16:21:21.992 YSF RF Parameters
I: 2020-05-13 16:21:21.992     Low Deviation: no
I: 2020-05-13 16:21:21.992     Remote Gateway: no
I: 2020-05-13 16:21:21.992     Self Only: no
I: 2020-05-13 16:21:21.992     DSQ: no
I: 2020-05-13 16:21:21.992     Mode Hang: 10s
M: 2020-05-13 16:21:21.992 YSF, Opening INI file: DVSwitch.ini
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] TXPort -> 35100
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] RXPort -> 35103
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] FallbackID -> 1234567
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] ExportTG -> 1234
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] Slot -> 2
E: 2020-05-13 16:21:21.993 Cannot bind the UDP address, err: 98
F: 2020-05-13 16:21:21.993 YSF, Can not open listener port 35103
E: 2020-05-13 16:21:26.714 Error returned from sendto, err: 22
E: 2020-05-13 16:21:31.716 Error returned from sendto, err: 22
E: 2020-05-13 16:21:36.716 Error returned from sendto, err: 22
E: 2020-05-13 16:21:41.719 Error returned from sendto, err: 22
E: 2020-05-13 16:21:46.720 Error returned from sendto, err: 22
E: 2020-05-13 16:21:51.722 Error returned from sendto, err: 22
E: 2020-05-13 16:21:56.723 Error returned from sendto, err: 22
E: 2020-05-13 16:22:01.726 Error returned from sendto, err: 22
E: 2020-05-13 16:22:06.727 Error returned from sendto, err: 22
E: 2020-05-13 16:22:11.731 Error returned from sendto, err: 22
E: 2020-05-13 16:22:16.735 Error returned from sendto, err: 22
E: 2020-05-13 16:22:21.735 Error returned from sendto, err: 22
E: 2020-05-13 16:22:26.738 Error returned from sendto, err: 22
E: 2020-05-13 16:22:31.740 Error returned from sendto, err: 22
E: 2020-05-13 16:23:06.768 Error returned from sendto, err: 22
E: 2020-05-13 16:23:11.770 Error returned from sendto, err: 22
E: 2020-05-13 16:23:16.770 Error returned from sendto, err: 22
E: 2020-05-13 16:23:21.773 Error returned from sendto, err: 22
E: 2020-05-13 16:23:26.777 Error returned from sendto, err: 22
W: 2020-05-13 16:23:29.425 YSF, TLV length does not match UDP/serial bytes$
E: 2020-05-13 16:23:29.425 YSF, Unknown tag (85) in TLV
E: 2020-05-13 16:23:31.782 Error returned from sendto, err: 22
E: 2020-05-13 16:23:36.785 Error returned from sendto, err: 22
E: 2020-05-13 16:23:41.787 Error returned from sendto, err: 22
E: 2020-05-13 16:23:46.790 Error returned from sendto, err: 22
E: 2020-05-13 16:23:51.791 Error returned from sendto, err: 22
E: 2020-05-13 16:23:56.792 Error returned from sendto, err: 22
E: 2020-05-13 16:24:01.796 Error returned from sendto, err: 22
E: 2020-05-13 16:24:06.801 Error returned from sendto, err: 22
E: 2020-05-13 16:24:11.805 Error returned from sendto, err: 22
E: 2020-05-13 16:24:16.807 Error returned from sendto, err: 22
E: 2020-05-13 16:24:21.810 Error returned from sendto, err: 22
E: 2020-05-13 16:24:26.813 Error returned from sendto, err: 22
E: 2020-05-13 16:24:31.815 Error returned from sendto, err: 22
E: 2020-05-13 16:24:36.818 Error returned from sendto, err: 22
E: 2020-05-13 16:24:41.819 Error returned from sendto, err: 22
E: 2020-05-13 16:24:46.819 Error returned from sendto, err: 22
E: 2020-05-13 16:24:51.820 Error returned from sendto, err: 22
E: 2020-05-13 16:24:56.822 Error returned from sendto, err: 22
E: 2020-05-13 16:25:01.824 Error returned from sendto, err: 22
E: 2020-05-13 16:25:06.824 Error returned from sendto, err: 22


Steve N4IRS
 

Stop AB, and MB.
delete the MB log in /var/log/mmdvm
delete the AB log in /var/log/dvswitch
show the output of ps ax | grep opt
start ab and mb
capture the MB and AB log
post them.

On 5/13/2020 12:26 PM, honda5603@... wrote:
I: 2020-05-13 16:21:21.769 System Fusion Network Parameters
I: 2020-05-13 16:21:21.769     Local Address: 127.0.0.1
I: 2020-05-13 16:21:21.769     Local Port: 3200
I: 2020-05-13 16:21:21.769     Gateway Address: russell9.com
I: 2020-05-13 16:21:21.769     Gateway Port: 42000
I: 2020-05-13 16:21:21.769     Mode Hang: 3s
M: 2020-05-13 16:21:21.847 Opening YSF network connection
I: 2020-05-13 16:21:21.847 RSSI
I: 2020-05-13 16:21:21.847     Mapping File: RSSI.dat
W: 2020-05-13 16:21:21.847 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-13 16:21:21.847 DMR Id Lookups
I: 2020-05-13 16:21:21.848     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-13 16:21:21.848     Reload: 24 hours
I: 2020-05-13 16:21:21.992 Loaded 164254 Ids to the DMR callsign lookup ta$
I: 2020-05-13 16:21:21.992 YSF RF Parameters
I: 2020-05-13 16:21:21.992     Low Deviation: no
I: 2020-05-13 16:21:21.992     Remote Gateway: no
I: 2020-05-13 16:21:21.992     Self Only: no
I: 2020-05-13 16:21:21.992     DSQ: no
I: 2020-05-13 16:21:21.992     Mode Hang: 10s
M: 2020-05-13 16:21:21.992 YSF, Opening INI file: DVSwitch.ini
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] TXPort -> 35100
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] RXPort -> 35103
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] FallbackID -> 1234567
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] ExportTG -> 1234
M: 2020-05-13 16:21:21.993 YSF, Setting [YSF] Slot -> 2
E: 2020-05-13 16:21:21.993 Cannot bind the UDP address, err: 98
F: 2020-05-13 16:21:21.993 YSF, Can not open listener port 35103
E: 2020-05-13 16:21:26.714 Error returned from sendto, err: 22
E: 2020-05-13 16:21:31.716 Error returned from sendto, err: 22
E: 2020-05-13 16:21:36.716 Error returned from sendto, err: 22
E: 2020-05-13 16:21:41.719 Error returned from sendto, err: 22
E: 2020-05-13 16:21:46.720 Error returned from sendto, err: 22
E: 2020-05-13 16:21:51.722 Error returned from sendto, err: 22
E: 2020-05-13 16:21:56.723 Error returned from sendto, err: 22
E: 2020-05-13 16:22:01.726 Error returned from sendto, err: 22
E: 2020-05-13 16:22:06.727 Error returned from sendto, err: 22
E: 2020-05-13 16:22:11.731 Error returned from sendto, err: 22
E: 2020-05-13 16:22:16.735 Error returned from sendto, err: 22
E: 2020-05-13 16:22:21.735 Error returned from sendto, err: 22
E: 2020-05-13 16:22:26.738 Error returned from sendto, err: 22
E: 2020-05-13 16:22:31.740 Error returned from sendto, err: 22
E: 2020-05-13 16:23:06.768 Error returned from sendto, err: 22
E: 2020-05-13 16:23:11.770 Error returned from sendto, err: 22
E: 2020-05-13 16:23:16.770 Error returned from sendto, err: 22
E: 2020-05-13 16:23:21.773 Error returned from sendto, err: 22
E: 2020-05-13 16:23:26.777 Error returned from sendto, err: 22
W: 2020-05-13 16:23:29.425 YSF, TLV length does not match UDP/serial bytes$
E: 2020-05-13 16:23:29.425 YSF, Unknown tag (85) in TLV
E: 2020-05-13 16:23:31.782 Error returned from sendto, err: 22
E: 2020-05-13 16:23:36.785 Error returned from sendto, err: 22
E: 2020-05-13 16:23:41.787 Error returned from sendto, err: 22
E: 2020-05-13 16:23:46.790 Error returned from sendto, err: 22
E: 2020-05-13 16:23:51.791 Error returned from sendto, err: 22
E: 2020-05-13 16:23:56.792 Error returned from sendto, err: 22
E: 2020-05-13 16:24:01.796 Error returned from sendto, err: 22
E: 2020-05-13 16:24:06.801 Error returned from sendto, err: 22
E: 2020-05-13 16:24:11.805 Error returned from sendto, err: 22
E: 2020-05-13 16:24:16.807 Error returned from sendto, err: 22
E: 2020-05-13 16:24:21.810 Error returned from sendto, err: 22
E: 2020-05-13 16:24:26.813 Error returned from sendto, err: 22
E: 2020-05-13 16:24:31.815 Error returned from sendto, err: 22
E: 2020-05-13 16:24:36.818 Error returned from sendto, err: 22
E: 2020-05-13 16:24:41.819 Error returned from sendto, err: 22
E: 2020-05-13 16:24:46.819 Error returned from sendto, err: 22
E: 2020-05-13 16:24:51.820 Error returned from sendto, err: 22
E: 2020-05-13 16:24:56.822 Error returned from sendto, err: 22
E: 2020-05-13 16:25:01.824 Error returned from sendto, err: 22
E: 2020-05-13 16:25:06.824 Error returned from sendto, err: 22


honda5603@...
 

GNU nano 2.7.4                      File: MMDVM_Bridge-2020-05-13.log

I: 2020-05-13 17:03:55.770 MMDVM_Bridge:
I: 2020-05-13 17:03:55.770 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-13 17:03:55.770 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-05-13 17:03:55.770 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-05-13 17:03:55.770 This software is for use on amateur radio networks only,
I: 2020-05-13 17:03:55.770 it is to be used for educational purposes only. Its use on
I: 2020-05-13 17:03:55.770 commercial networks is strictly prohibited.
I: 2020-05-13 17:03:55.770 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-05-13 17:03:55.770 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-05-13 17:03:55.770 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)
I: 2020-05-13 17:03:55.770 General Parameters
I: 2020-05-13 17:03:55.770     Callsign: KC9HTA
I: 2020-05-13 17:03:55.770     Id: 311858301
I: 2020-05-13 17:03:55.770     Duplex: no
I: 2020-05-13 17:03:55.770     Timeout: 180s
I: 2020-05-13 17:03:55.770     D-Star: disabled
I: 2020-05-13 17:03:55.770     DMR: disabled
I: 2020-05-13 17:03:55.770     YSF: enabled
I: 2020-05-13 17:03:55.770     P25: disabled
I: 2020-05-13 17:03:55.770     NXDN: disabled
I: 2020-05-13 17:03:55.770 Modem Parameters
I: 2020-05-13 17:03:55.770     Port: /dev/null
I: 2020-05-13 17:03:55.770     RX Invert: no
I: 2020-05-13 17:03:55.770     TX Invert: no
I: 2020-05-13 17:03:55.770     PTT Invert: no
I: 2020-05-13 17:03:55.770     TX Delay: 100ms
I: 2020-05-13 17:03:55.770     RX Offset: 0Hz
I: 2020-05-13 17:03:55.770     TX Offset: 0Hz
I: 2020-05-13 17:03:55.770     RX DC Offset: 0
I: 2020-05-13 17:03:55.770     TX DC Offset: 0
I: 2020-05-13 17:03:55.770     RF Level: 100.0%
I: 2020-05-13 17:03:55.770     DMR Delay: 0 (0.0ms)
I: 2020-05-13 17:03:55.770     RX Level: 50.0%
I: 2020-05-13 17:03:55.770     CW Id TX Level: 50.0%
I: 2020-05-13 17:03:55.770     D-Star TX Level: 50.0%
I: 2020-05-13 17:03:55.770     DMR TX Level: 50.0%
I: 2020-05-13 17:03:55.770     YSF TX Level: 50.0%
I: 2020-05-13 17:03:55.770     P25 TX Level: 50.0%
I: 2020-05-13 17:03:55.770     NXDN TX Level: 50.0%
I: 2020-05-13 17:03:55.770     RX Frequency: 222340000Hz (222340000Hz)
I: 2020-05-13 17:03:55.770     TX Frequency: 224940000Hz (224940000Hz)
M: 2020-05-13 17:03:55.771 Opening the MMDVM
I: 2020-05-13 17:03:55.771 Display Parameters
I: 2020-05-13 17:03:55.771     Type:
I: 2020-05-13 17:03:55.771 System Fusion Network Parameters
I: 2020-05-13 17:03:55.771     Local Address: 127.0.0.1
I: 2020-05-13 17:03:55.771     Local Port: 3200
I: 2020-05-13 17:03:55.771     Gateway Address: 192.168.1.72
I: 2020-05-13 17:03:55.771     Gateway Port: 42000
I: 2020-05-13 17:03:55.771     Mode Hang: 3s
M: 2020-05-13 17:03:55.771 Opening YSF network connection
I: 2020-05-13 17:03:55.771 RSSI
I: 2020-05-13 17:03:55.771     Mapping File: RSSI.dat
W: 2020-05-13 17:03:55.771 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-13 17:03:55.771 DMR Id Lookups
I: 2020-05-13 17:03:55.771     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-13 17:03:55.771     Reload: 24 hours
I: 2020-05-13 17:03:56.091 Loaded 164254 Ids to the DMR callsign lookup table
I: 2020-05-13 17:03:56.091 YSF RF Parameters
I: 2020-05-13 17:03:56.091     Low Deviation: no
I: 2020-05-13 17:03:56.091     Remote Gateway: no
I: 2020-05-13 17:03:56.091     Self Only: no
I: 2020-05-13 17:03:56.091     DSQ: no
I: 2020-05-13 17:03:56.091     Mode Hang: 10s
M: 2020-05-13 17:03:56.091 YSF, Opening INI file: DVSwitch.ini
I: 2020-05-13 17:03:56.091 Started the DMR Id lookup reload thread
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] TXPort -> 35100
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] RXPort -> 35103
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] FallbackID -> 1234567
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] ExportTG -> 1234
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] Slot -> 2
M: 2020-05-13 17:03:56.091 YSF, Transmitting on 127.0.0.1:35100 and listening on port 35103.  Result =$
M: 2020-05-13 17:03:56.091 MMDVM_Bridge-20191105_V1.4.1 is running
E: 2020-05-13 17:04:01.093 Error returned from sendto, err: 22
E: 2020-05-13 17:04:06.098 Error returned from sendto, err: 22
E: 2020-05-13 17:04:11.101 Error returned from sendto, err: 22
E: 2020-05-13 17:04:16.102 Error returned from sendto, err: 22
E: 2020-05-13 17:04:21.105 Error returned from sendto, err: 22
E: 2020-05-13 17:04:26.107 Error returned from sendto, err: 22
E: 2020-05-13 17:04:31.111 Error returned from sendto, err: 22
E: 2020-05-13 17:04:36.114 Error returned from sendto, err: 22
E: 2020-05-13 17:04:41.114 Error returned from sendto, err: 22
E: 2020-05-13 17:04:46.117 Error returned from sendto, err: 22
E: 2020-05-13 17:04:51.123 Error returned from sendto, err: 22
E: 2020-05-13 17:04:56.125 Error returned from sendto, err: 22
E: 2020-05-13 17:05:01.128 Error returned from sendto, err: 22
E: 2020-05-13 17:05:06.131 Error returned from sendto, err: 22
E: 2020-05-13 17:05:11.131 Error returned from sendto, err: 22
E: 2020-05-13 17:05:16.133 Error returned from sendto, err: 22
E: 2020-05-13 17:05:21.136 Error returned from sendto, err: 22
E: 2020-05-13 17:05:26.140 Error returned from sendto, err: 22
E: 2020-05-13 17:05:31.145 Error returned from sendto, err: 22
E: 2020-05-13 17:05:36.147 Error returned from sendto, err: 22
E: 2020-05-13 17:05:41.150 Error returned from sendto, err: 22
E: 2020-05-13 17:05:46.154 Error returned from sendto, err: 22
E: 2020-05-13 17:05:51.154 Error returned from sendto, err: 22
E: 2020-05-13 17:05:56.157 Error returned from sendto, err: 22
E: 2020-05-13 17:06:01.159 Error returned from sendto, err: 22
E: 2020-05-13 17:06:06.159 Error returned from sendto, err: 22
E: 2020-05-13 17:06:11.164 Error returned from sendto, err: 22
E: 2020-05-13 17:06:16.166 Error returned from sendto, err: 22
E: 2020-05-13 17:06:21.172 Error returned from sendto, err: 22
E: 2020-05-13 17:06:26.172 Error returned from sendto, err: 22


Analog Bridge:

root@nwr-asl:/opt/Analog_Bridge# ./Analog_Bridge Analog_Bridge.ini
I: 2020-05-13 17:08:18.783 Analog_Bridge Version 1.4.2 Fri Jan 10 09:38:27 EST 2020
I: 2020-05-13 17:08:18.783 Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-13 17:08:18.784 Created by Mike N4IRR and Steve N4IRS
I: 2020-05-13 17:08:18.784 Analog_Bridge comes with ABSOLUTELY NO WARRANTY
I: 2020-05-13 17:08:18.784
I: 2020-05-13 17:08:18.784 This software is for use on amateur radio networks only,
I: 2020-05-13 17:08:18.784 it is to be used for educational purposes only. Its use on
I: 2020-05-13 17:08:18.784 commercial networks is strictly prohibited.
I: 2020-05-13 17:08:18.784
I: 2020-05-13 17:08:18.784 Analog_Bridge is starting
M: 2020-05-13 17:08:18.784 Setting [MACROS] DMR -> /opt/Analog_Bridge/dvswitch.sh mode DMR
M: 2020-05-13 17:08:18.784 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/dvswitch.sh mode DSTAR
M: 2020-05-13 17:08:18.784 Setting [MACROS] NXDN -> /opt/Analog_Bridge/dvswitch.sh mode NXDN
M: 2020-05-13 17:08:18.784 Setting [MACROS] P25 -> /opt/Analog_Bridge/dvswitch.sh mode P25
M: 2020-05-13 17:08:18.785 Setting [MACROS] YSF -> /opt/Analog_Bridge/dvswitch.sh mode YSF
M: 2020-05-13 17:08:18.785 Setting [MACROS] dbupdate -> /opt/Analog_Bridge/dvswitch.sh collectProcessPushDataFiles
M: 2020-05-13 17:08:18.785 Setting [MACROS] 9876 -> /opt/Analog_Bridge/parrot.sh
M: 2020-05-13 17:08:18.785 Setting [] include -> dvsm.macro
M: 2020-05-13 17:08:18.785 Setting [GENERAL] logLevel -> 2
M: 2020-05-13 17:08:18.785 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2020-05-13 17:08:18.785 Setting [GENERAL] exportMetadata -> true
M: 2020-05-13 17:08:18.785 Setting [GENERAL] decoderFallBack -> true
M: 2020-05-13 17:08:18.785 Setting [GENERAL] useEmulator -> false
M: 2020-05-13 17:08:18.785 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] txPort -> 35103
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] rxPort -> 35100
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] ambeMode -> YSFN
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] gatewayDmrId -> 3118583
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] repeaterID -> 311858301
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] txTg -> 37921
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] txTs -> 2
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] colorCode -> 1
M: 2020-05-13 17:08:18.786 Setting [USRP] address -> 127.0.0.1
M: 2020-05-13 17:08:18.786 Setting [USRP] txPort -> 35103
M: 2020-05-13 17:08:18.786 Setting [USRP] rxPort -> 33510
M: 2020-05-13 17:08:18.786 Setting [USRP] usrpAudio -> AUDIO_UNITY
M: 2020-05-13 17:08:18.786 Setting [USRP] usrpGain -> 1.10
M: 2020-05-13 17:08:18.786 Setting [USRP] tlvAudio -> AUDIO_UNITY
M: 2020-05-13 17:08:18.786 Setting [USRP] tlvGain -> 0.35
M: 2020-05-13 17:08:18.786 Setting [DV3000] address -> 127.0.0.1
M: 2020-05-13 17:08:18.786 Setting [DV3000] rxPort -> 2460
I: 2020-05-13 17:08:18.786 Open UDP listener on 127.0.0.1:35100
I: 2020-05-13 17:08:18.787 Open USRP on 127.0.0.1:35103
M: 2020-05-13 17:08:18.787 Connecting to DV3000 hardware......
W: 2020-05-13 17:08:19.796 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2020-05-13 17:08:19.868 Subscriber IDs loaded: 93908
I: 2020-05-13 17:08:19.868 Default extended metadata <KC9HTA>
W: 2020-05-13 17:08:19.868 Using software MBE decoder version 1.2.3
W: 2020-05-13 17:08:19.868 Using software OP25 IMBE/AMBE vocoder
I: 2020-05-13 17:08:19.868 Connected to USRP 127.0.0.1:35103
I: 2020-05-13 17:08:19.868 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2020-05-13 17:08:19.869 Starting USRP --> Analog_Bridge (encoder) -> TLV thread


Pete Fierro
 

Using the bridge to YSF,do u have to change the TG in Analog_Bridge.ini like u do for DMR?


On Wed, May 13, 2020 at 13:09, honda5603@...
<honda5603@...> wrote:
GNU nano 2.7.4                      File: MMDVM_Bridge-2020-05-13.log

I: 2020-05-13 17:03:55.770 MMDVM_Bridge:
I: 2020-05-13 17:03:55.770 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-13 17:03:55.770 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-05-13 17:03:55.770 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-05-13 17:03:55.770 This software is for use on amateur radio networks only,
I: 2020-05-13 17:03:55.770 it is to be used for educational purposes only. Its use on
I: 2020-05-13 17:03:55.770 commercial networks is strictly prohibited.
I: 2020-05-13 17:03:55.770 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-05-13 17:03:55.770 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-05-13 17:03:55.770 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)
I: 2020-05-13 17:03:55.770 General Parameters
I: 2020-05-13 17:03:55.770     Callsign: KC9HTA
I: 2020-05-13 17:03:55.770     Id: 311858301
I: 2020-05-13 17:03:55.770     Duplex: no
I: 2020-05-13 17:03:55.770     Timeout: 180s
I: 2020-05-13 17:03:55.770     D-Star: disabled
I: 2020-05-13 17:03:55.770     DMR: disabled
I: 2020-05-13 17:03:55.770     YSF: enabled
I: 2020-05-13 17:03:55.770     P25: disabled
I: 2020-05-13 17:03:55.770     NXDN: disabled
I: 2020-05-13 17:03:55.770 Modem Parameters
I: 2020-05-13 17:03:55.770     Port: /dev/null
I: 2020-05-13 17:03:55.770     RX Invert: no
I: 2020-05-13 17:03:55.770     TX Invert: no
I: 2020-05-13 17:03:55.770     PTT Invert: no
I: 2020-05-13 17:03:55.770     TX Delay: 100ms
I: 2020-05-13 17:03:55.770     RX Offset: 0Hz
I: 2020-05-13 17:03:55.770     TX Offset: 0Hz
I: 2020-05-13 17:03:55.770     RX DC Offset: 0
I: 2020-05-13 17:03:55.770     TX DC Offset: 0
I: 2020-05-13 17:03:55.770     RF Level: 100.0%
I: 2020-05-13 17:03:55.770     DMR Delay: 0 (0.0ms)
I: 2020-05-13 17:03:55.770     RX Level: 50.0%
I: 2020-05-13 17:03:55.770     CW Id TX Level: 50.0%
I: 2020-05-13 17:03:55.770     D-Star TX Level: 50.0%
I: 2020-05-13 17:03:55.770     DMR TX Level: 50.0%
I: 2020-05-13 17:03:55.770     YSF TX Level: 50.0%
I: 2020-05-13 17:03:55.770     P25 TX Level: 50.0%
I: 2020-05-13 17:03:55.770     NXDN TX Level: 50.0%
I: 2020-05-13 17:03:55.770     RX Frequency: 222340000Hz (222340000Hz)
I: 2020-05-13 17:03:55.770     TX Frequency: 224940000Hz (224940000Hz)
M: 2020-05-13 17:03:55.771 Opening the MMDVM
I: 2020-05-13 17:03:55.771 Display Parameters
I: 2020-05-13 17:03:55.771     Type:
I: 2020-05-13 17:03:55.771 System Fusion Network Parameters
I: 2020-05-13 17:03:55.771     Local Address: 127.0.0.1
I: 2020-05-13 17:03:55.771     Local Port: 3200
I: 2020-05-13 17:03:55.771     Gateway Address: 192.168.1.72
I: 2020-05-13 17:03:55.771     Gateway Port: 42000
I: 2020-05-13 17:03:55.771     Mode Hang: 3s
M: 2020-05-13 17:03:55.771 Opening YSF network connection
I: 2020-05-13 17:03:55.771 RSSI
I: 2020-05-13 17:03:55.771     Mapping File: RSSI.dat
W: 2020-05-13 17:03:55.771 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-13 17:03:55.771 DMR Id Lookups
I: 2020-05-13 17:03:55.771     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-13 17:03:55.771     Reload: 24 hours
I: 2020-05-13 17:03:56.091 Loaded 164254 Ids to the DMR callsign lookup table
I: 2020-05-13 17:03:56.091 YSF RF Parameters
I: 2020-05-13 17:03:56.091     Low Deviation: no
I: 2020-05-13 17:03:56.091     Remote Gateway: no
I: 2020-05-13 17:03:56.091     Self Only: no
I: 2020-05-13 17:03:56.091     DSQ: no
I: 2020-05-13 17:03:56.091     Mode Hang: 10s
M: 2020-05-13 17:03:56.091 YSF, Opening INI file: DVSwitch.ini
I: 2020-05-13 17:03:56.091 Started the DMR Id lookup reload thread
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] TXPort -> 35100
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] RXPort -> 35103
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] FallbackID -> 1234567
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] ExportTG -> 1234
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] Slot -> 2
M: 2020-05-13 17:03:56.091 YSF, Transmitting on 127.0.0.1:35100 and listening on port 35103.  Result =$
M: 2020-05-13 17:03:56.091 MMDVM_Bridge-20191105_V1.4.1 is running
E: 2020-05-13 17:04:01.093 Error returned from sendto, err: 22
E: 2020-05-13 17:04:06.098 Error returned from sendto, err: 22
E: 2020-05-13 17:04:11.101 Error returned from sendto, err: 22
E: 2020-05-13 17:04:16.102 Error returned from sendto, err: 22
E: 2020-05-13 17:04:21.105 Error returned from sendto, err: 22
E: 2020-05-13 17:04:26.107 Error returned from sendto, err: 22
E: 2020-05-13 17:04:31.111 Error returned from sendto, err: 22
E: 2020-05-13 17:04:36.114 Error returned from sendto, err: 22
E: 2020-05-13 17:04:41.114 Error returned from sendto, err: 22
E: 2020-05-13 17:04:46.117 Error returned from sendto, err: 22
E: 2020-05-13 17:04:51.123 Error returned from sendto, err: 22
E: 2020-05-13 17:04:56.125 Error returned from sendto, err: 22
E: 2020-05-13 17:05:01.128 Error returned from sendto, err: 22
E: 2020-05-13 17:05:06.131 Error returned from sendto, err: 22
E: 2020-05-13 17:05:11.131 Error returned from sendto, err: 22
E: 2020-05-13 17:05:16.133 Error returned from sendto, err: 22
E: 2020-05-13 17:05:21.136 Error returned from sendto, err: 22
E: 2020-05-13 17:05:26.140 Error returned from sendto, err: 22
E: 2020-05-13 17:05:31.145 Error returned from sendto, err: 22
E: 2020-05-13 17:05:36.147 Error returned from sendto, err: 22
E: 2020-05-13 17:05:41.150 Error returned from sendto, err: 22
E: 2020-05-13 17:05:46.154 Error returned from sendto, err: 22
E: 2020-05-13 17:05:51.154 Error returned from sendto, err: 22
E: 2020-05-13 17:05:56.157 Error returned from sendto, err: 22
E: 2020-05-13 17:06:01.159 Error returned from sendto, err: 22
E: 2020-05-13 17:06:06.159 Error returned from sendto, err: 22
E: 2020-05-13 17:06:11.164 Error returned from sendto, err: 22
E: 2020-05-13 17:06:16.166 Error returned from sendto, err: 22
E: 2020-05-13 17:06:21.172 Error returned from sendto, err: 22
E: 2020-05-13 17:06:26.172 Error returned from sendto, err: 22


Analog Bridge:

root@nwr-asl:/opt/Analog_Bridge# ./Analog_Bridge Analog_Bridge.ini
I: 2020-05-13 17:08:18.783 Analog_Bridge Version 1.4.2 Fri Jan 10 09:38:27 EST 2020
I: 2020-05-13 17:08:18.783 Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-13 17:08:18.784 Created by Mike N4IRR and Steve N4IRS
I: 2020-05-13 17:08:18.784 Analog_Bridge comes with ABSOLUTELY NO WARRANTY
I: 2020-05-13 17:08:18.784
I: 2020-05-13 17:08:18.784 This software is for use on amateur radio networks only,
I: 2020-05-13 17:08:18.784 it is to be used for educational purposes only. Its use on
I: 2020-05-13 17:08:18.784 commercial networks is strictly prohibited.
I: 2020-05-13 17:08:18.784
I: 2020-05-13 17:08:18.784 Analog_Bridge is starting
M: 2020-05-13 17:08:18.784 Setting [MACROS] DMR -> /opt/Analog_Bridge/dvswitch.sh mode DMR
M: 2020-05-13 17:08:18.784 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/dvswitch.sh mode DSTAR
M: 2020-05-13 17:08:18.784 Setting [MACROS] NXDN -> /opt/Analog_Bridge/dvswitch.sh mode NXDN
M: 2020-05-13 17:08:18.784 Setting [MACROS] P25 -> /opt/Analog_Bridge/dvswitch.sh mode P25
M: 2020-05-13 17:08:18.785 Setting [MACROS] YSF -> /opt/Analog_Bridge/dvswitch.sh mode YSF
M: 2020-05-13 17:08:18.785 Setting [MACROS] dbupdate -> /opt/Analog_Bridge/dvswitch.sh collectProcessPushDataFiles
M: 2020-05-13 17:08:18.785 Setting [MACROS] 9876 -> /opt/Analog_Bridge/parrot.sh
M: 2020-05-13 17:08:18.785 Setting [] include -> dvsm.macro
M: 2020-05-13 17:08:18.785 Setting [GENERAL] logLevel -> 2
M: 2020-05-13 17:08:18.785 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2020-05-13 17:08:18.785 Setting [GENERAL] exportMetadata -> true
M: 2020-05-13 17:08:18.785 Setting [GENERAL] decoderFallBack -> true
M: 2020-05-13 17:08:18.785 Setting [GENERAL] useEmulator -> false
M: 2020-05-13 17:08:18.785 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] txPort -> 35103
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] rxPort -> 35100
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] ambeMode -> YSFN
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] gatewayDmrId -> 3118583
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] repeaterID -> 311858301
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] txTg -> 37921
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] txTs -> 2
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] colorCode -> 1
M: 2020-05-13 17:08:18.786 Setting [USRP] address -> 127.0.0.1
M: 2020-05-13 17:08:18.786 Setting [USRP] txPort -> 35103
M: 2020-05-13 17:08:18.786 Setting [USRP] rxPort -> 33510
M: 2020-05-13 17:08:18.786 Setting [USRP] usrpAudio -> AUDIO_UNITY
M: 2020-05-13 17:08:18.786 Setting [USRP] usrpGain -> 1.10
M: 2020-05-13 17:08:18.786 Setting [USRP] tlvAudio -> AUDIO_UNITY
M: 2020-05-13 17:08:18.786 Setting [USRP] tlvGain -> 0.35
M: 2020-05-13 17:08:18.786 Setting [DV3000] address -> 127.0.0.1
M: 2020-05-13 17:08:18.786 Setting [DV3000] rxPort -> 2460
I: 2020-05-13 17:08:18.786 Open UDP listener on 127.0.0.1:35100
I: 2020-05-13 17:08:18.787 Open USRP on 127.0.0.1:35103
M: 2020-05-13 17:08:18.787 Connecting to DV3000 hardware......
W: 2020-05-13 17:08:19.796 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2020-05-13 17:08:19.868 Subscriber IDs loaded: 93908
I: 2020-05-13 17:08:19.868 Default extended metadata <KC9HTA>
W: 2020-05-13 17:08:19.868 Using software MBE decoder version 1.2.3
W: 2020-05-13 17:08:19.868 Using software OP25 IMBE/AMBE vocoder
I: 2020-05-13 17:08:19.868 Connected to USRP 127.0.0.1:35103
I: 2020-05-13 17:08:19.868 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2020-05-13 17:08:19.869 Starting USRP --> Analog_Bridge (encoder) -> TLV thread


Steve N4IRS
 

Stop AB and MB
Show the output of:
ps ax | grep opt
netstat -unap | grep 351

Steve

On 5/13/2020 1:08 PM, honda5603@... wrote:
GNU nano 2.7.4                      File: MMDVM_Bridge-2020-05-13.log

I: 2020-05-13 17:03:55.770 MMDVM_Bridge:
I: 2020-05-13 17:03:55.770 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-13 17:03:55.770 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-05-13 17:03:55.770 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-05-13 17:03:55.770 This software is for use on amateur radio networks only,
I: 2020-05-13 17:03:55.770 it is to be used for educational purposes only. Its use on
I: 2020-05-13 17:03:55.770 commercial networks is strictly prohibited.
I: 2020-05-13 17:03:55.770 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-05-13 17:03:55.770 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-05-13 17:03:55.770 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)
I: 2020-05-13 17:03:55.770 General Parameters
I: 2020-05-13 17:03:55.770     Callsign: KC9HTA
I: 2020-05-13 17:03:55.770     Id: 311858301
I: 2020-05-13 17:03:55.770     Duplex: no
I: 2020-05-13 17:03:55.770     Timeout: 180s
I: 2020-05-13 17:03:55.770     D-Star: disabled
I: 2020-05-13 17:03:55.770     DMR: disabled
I: 2020-05-13 17:03:55.770     YSF: enabled
I: 2020-05-13 17:03:55.770     P25: disabled
I: 2020-05-13 17:03:55.770     NXDN: disabled
I: 2020-05-13 17:03:55.770 Modem Parameters
I: 2020-05-13 17:03:55.770     Port: /dev/null
I: 2020-05-13 17:03:55.770     RX Invert: no
I: 2020-05-13 17:03:55.770     TX Invert: no
I: 2020-05-13 17:03:55.770     PTT Invert: no
I: 2020-05-13 17:03:55.770     TX Delay: 100ms
I: 2020-05-13 17:03:55.770     RX Offset: 0Hz
I: 2020-05-13 17:03:55.770     TX Offset: 0Hz
I: 2020-05-13 17:03:55.770     RX DC Offset: 0
I: 2020-05-13 17:03:55.770     TX DC Offset: 0
I: 2020-05-13 17:03:55.770     RF Level: 100.0%
I: 2020-05-13 17:03:55.770     DMR Delay: 0 (0.0ms)
I: 2020-05-13 17:03:55.770     RX Level: 50.0%
I: 2020-05-13 17:03:55.770     CW Id TX Level: 50.0%
I: 2020-05-13 17:03:55.770     D-Star TX Level: 50.0%
I: 2020-05-13 17:03:55.770     DMR TX Level: 50.0%
I: 2020-05-13 17:03:55.770     YSF TX Level: 50.0%
I: 2020-05-13 17:03:55.770     P25 TX Level: 50.0%
I: 2020-05-13 17:03:55.770     NXDN TX Level: 50.0%
I: 2020-05-13 17:03:55.770     RX Frequency: 222340000Hz (222340000Hz)
I: 2020-05-13 17:03:55.770     TX Frequency: 224940000Hz (224940000Hz)
M: 2020-05-13 17:03:55.771 Opening the MMDVM
I: 2020-05-13 17:03:55.771 Display Parameters
I: 2020-05-13 17:03:55.771     Type:
I: 2020-05-13 17:03:55.771 System Fusion Network Parameters
I: 2020-05-13 17:03:55.771     Local Address: 127.0.0.1
I: 2020-05-13 17:03:55.771     Local Port: 3200
I: 2020-05-13 17:03:55.771     Gateway Address: 192.168.1.72
I: 2020-05-13 17:03:55.771     Gateway Port: 42000
I: 2020-05-13 17:03:55.771     Mode Hang: 3s
M: 2020-05-13 17:03:55.771 Opening YSF network connection
I: 2020-05-13 17:03:55.771 RSSI
I: 2020-05-13 17:03:55.771     Mapping File: RSSI.dat
W: 2020-05-13 17:03:55.771 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-13 17:03:55.771 DMR Id Lookups
I: 2020-05-13 17:03:55.771     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-13 17:03:55.771     Reload: 24 hours
I: 2020-05-13 17:03:56.091 Loaded 164254 Ids to the DMR callsign lookup table
I: 2020-05-13 17:03:56.091 YSF RF Parameters
I: 2020-05-13 17:03:56.091     Low Deviation: no
I: 2020-05-13 17:03:56.091     Remote Gateway: no
I: 2020-05-13 17:03:56.091     Self Only: no
I: 2020-05-13 17:03:56.091     DSQ: no
I: 2020-05-13 17:03:56.091     Mode Hang: 10s
M: 2020-05-13 17:03:56.091 YSF, Opening INI file: DVSwitch.ini
I: 2020-05-13 17:03:56.091 Started the DMR Id lookup reload thread
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] TXPort -> 35100
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] RXPort -> 35103
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] FallbackID -> 1234567
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] ExportTG -> 1234
M: 2020-05-13 17:03:56.091 YSF, Setting [YSF] Slot -> 2
M: 2020-05-13 17:03:56.091 YSF, Transmitting on 127.0.0.1:35100 and listening on port 35103.  Result =$
M: 2020-05-13 17:03:56.091 MMDVM_Bridge-20191105_V1.4.1 is running
E: 2020-05-13 17:04:01.093 Error returned from sendto, err: 22
E: 2020-05-13 17:04:06.098 Error returned from sendto, err: 22
E: 2020-05-13 17:04:11.101 Error returned from sendto, err: 22
E: 2020-05-13 17:04:16.102 Error returned from sendto, err: 22
E: 2020-05-13 17:04:21.105 Error returned from sendto, err: 22
E: 2020-05-13 17:04:26.107 Error returned from sendto, err: 22
E: 2020-05-13 17:04:31.111 Error returned from sendto, err: 22
E: 2020-05-13 17:04:36.114 Error returned from sendto, err: 22
E: 2020-05-13 17:04:41.114 Error returned from sendto, err: 22
E: 2020-05-13 17:04:46.117 Error returned from sendto, err: 22
E: 2020-05-13 17:04:51.123 Error returned from sendto, err: 22
E: 2020-05-13 17:04:56.125 Error returned from sendto, err: 22
E: 2020-05-13 17:05:01.128 Error returned from sendto, err: 22
E: 2020-05-13 17:05:06.131 Error returned from sendto, err: 22
E: 2020-05-13 17:05:11.131 Error returned from sendto, err: 22
E: 2020-05-13 17:05:16.133 Error returned from sendto, err: 22
E: 2020-05-13 17:05:21.136 Error returned from sendto, err: 22
E: 2020-05-13 17:05:26.140 Error returned from sendto, err: 22
E: 2020-05-13 17:05:31.145 Error returned from sendto, err: 22
E: 2020-05-13 17:05:36.147 Error returned from sendto, err: 22
E: 2020-05-13 17:05:41.150 Error returned from sendto, err: 22
E: 2020-05-13 17:05:46.154 Error returned from sendto, err: 22
E: 2020-05-13 17:05:51.154 Error returned from sendto, err: 22
E: 2020-05-13 17:05:56.157 Error returned from sendto, err: 22
E: 2020-05-13 17:06:01.159 Error returned from sendto, err: 22
E: 2020-05-13 17:06:06.159 Error returned from sendto, err: 22
E: 2020-05-13 17:06:11.164 Error returned from sendto, err: 22
E: 2020-05-13 17:06:16.166 Error returned from sendto, err: 22
E: 2020-05-13 17:06:21.172 Error returned from sendto, err: 22
E: 2020-05-13 17:06:26.172 Error returned from sendto, err: 22


Analog Bridge:

root@nwr-asl:/opt/Analog_Bridge# ./Analog_Bridge Analog_Bridge.ini
I: 2020-05-13 17:08:18.783 Analog_Bridge Version 1.4.2 Fri Jan 10 09:38:27 EST 2020
I: 2020-05-13 17:08:18.783 Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-13 17:08:18.784 Created by Mike N4IRR and Steve N4IRS
I: 2020-05-13 17:08:18.784 Analog_Bridge comes with ABSOLUTELY NO WARRANTY
I: 2020-05-13 17:08:18.784
I: 2020-05-13 17:08:18.784 This software is for use on amateur radio networks only,
I: 2020-05-13 17:08:18.784 it is to be used for educational purposes only. Its use on
I: 2020-05-13 17:08:18.784 commercial networks is strictly prohibited.
I: 2020-05-13 17:08:18.784
I: 2020-05-13 17:08:18.784 Analog_Bridge is starting
M: 2020-05-13 17:08:18.784 Setting [MACROS] DMR -> /opt/Analog_Bridge/dvswitch.sh mode DMR
M: 2020-05-13 17:08:18.784 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/dvswitch.sh mode DSTAR
M: 2020-05-13 17:08:18.784 Setting [MACROS] NXDN -> /opt/Analog_Bridge/dvswitch.sh mode NXDN
M: 2020-05-13 17:08:18.784 Setting [MACROS] P25 -> /opt/Analog_Bridge/dvswitch.sh mode P25
M: 2020-05-13 17:08:18.785 Setting [MACROS] YSF -> /opt/Analog_Bridge/dvswitch.sh mode YSF
M: 2020-05-13 17:08:18.785 Setting [MACROS] dbupdate -> /opt/Analog_Bridge/dvswitch.sh collectProcessPushDataFiles
M: 2020-05-13 17:08:18.785 Setting [MACROS] 9876 -> /opt/Analog_Bridge/parrot.sh
M: 2020-05-13 17:08:18.785 Setting [] include -> dvsm.macro
M: 2020-05-13 17:08:18.785 Setting [GENERAL] logLevel -> 2
M: 2020-05-13 17:08:18.785 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2020-05-13 17:08:18.785 Setting [GENERAL] exportMetadata -> true
M: 2020-05-13 17:08:18.785 Setting [GENERAL] decoderFallBack -> true
M: 2020-05-13 17:08:18.785 Setting [GENERAL] useEmulator -> false
M: 2020-05-13 17:08:18.785 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] txPort -> 35103
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] rxPort -> 35100
M: 2020-05-13 17:08:18.785 Setting [AMBE_AUDIO] ambeMode -> YSFN
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] gatewayDmrId -> 3118583
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] repeaterID -> 311858301
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] txTg -> 37921
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] txTs -> 2
M: 2020-05-13 17:08:18.786 Setting [AMBE_AUDIO] colorCode -> 1
M: 2020-05-13 17:08:18.786 Setting [USRP] address -> 127.0.0.1
M: 2020-05-13 17:08:18.786 Setting [USRP] txPort -> 35103
M: 2020-05-13 17:08:18.786 Setting [USRP] rxPort -> 33510
M: 2020-05-13 17:08:18.786 Setting [USRP] usrpAudio -> AUDIO_UNITY
M: 2020-05-13 17:08:18.786 Setting [USRP] usrpGain -> 1.10
M: 2020-05-13 17:08:18.786 Setting [USRP] tlvAudio -> AUDIO_UNITY
M: 2020-05-13 17:08:18.786 Setting [USRP] tlvGain -> 0.35
M: 2020-05-13 17:08:18.786 Setting [DV3000] address -> 127.0.0.1
M: 2020-05-13 17:08:18.786 Setting [DV3000] rxPort -> 2460
I: 2020-05-13 17:08:18.786 Open UDP listener on 127.0.0.1:35100
I: 2020-05-13 17:08:18.787 Open USRP on 127.0.0.1:35103
M: 2020-05-13 17:08:18.787 Connecting to DV3000 hardware......
W: 2020-05-13 17:08:19.796 DV3000 not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2020-05-13 17:08:19.868 Subscriber IDs loaded: 93908
I: 2020-05-13 17:08:19.868 Default extended metadata <KC9HTA>
W: 2020-05-13 17:08:19.868 Using software MBE decoder version 1.2.3
W: 2020-05-13 17:08:19.868 Using software OP25 IMBE/AMBE vocoder
I: 2020-05-13 17:08:19.868 Connected to USRP 127.0.0.1:35103
I: 2020-05-13 17:08:19.868 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2020-05-13 17:08:19.869 Starting USRP --> Analog_Bridge (encoder) -> TLV thread


honda5603@...
 

Steve,

I don't know how to show the output of these items:
ps ax | grep opt
netstat -unap | grep 351


Steve N4IRS
 

How are you running the programs? How are you starting and stopping programs?

On 5/13/2020 1:50 PM, honda5603@... wrote:
Steve,

I don't know how to show the output of these items:
ps ax | grep opt
netstat -unap | grep 351


honda5603@...
 

All run at startup

otherwise

systemctl (start/stop) analog_bridge or mmdvm_bridge


Steve N4IRS
 

How are you capturing the logs? what program are you using?

On 5/13/2020 2:00 PM, honda5603@... wrote:
All run at startup

otherwise

systemctl (start/stop) analog_bridge or mmdvm_bridge


honda5603@...
 

Using TeraTerm from a PC.