Topics

Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge


Rudy N6DOZ
 
Edited

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge.

Is it possible to emulate the same idea, but to an FCS reflector?

BM_TG <-> MB <-> FCS00457

Here's my attempt at this (just realized, there's no entry for me to put the reflector number):

MMDVM.ini

[General]
Callsign=N6DOZ
Id=315069250
Timeout=180
Duplex=0

 

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

 

[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

 

[System Fusion Network] ; FCS
Enable=1
LocalAddress=0
LocalPort=3201
GatewayAddress=fcs004.xreflector.net
GatewayPort=62500
Debug=0


DVSwitch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             
TXPort = 33100                  
RXPort = 33103                  
Slot = 2                        
; Slot = 1                      
 
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1            
TXPort = 33103                 
RXPort = 33100                 
FallbackID = 3135404           
ExportTG = 311620               
Slot = 2                       


Q. Is this even possible? Or is there a different method to this? 

Thanks in advance, 7-3 N6DOZ.

======

TL;DR

Got it working based with help from Eric K6KWB and Steve N4IRS.

This is what I ended up with:
 
BM <-> MB <-> YSFGateway <-> FCS Reflector

MMDVM_Bridge.ini
 
[General]
Callsign=N6DOZ
Id=315069220
Timeout=180
Duplex=0
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-DMX
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Password=passw0rd
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62045
GatewayAddress=127.0.0.1
GatewayPort=62046
Debug=0
 
 
 
DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                
Slot = 2                       
 
[YSF]
Address = 127.0.0.1              
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                        
 
 
YSFGateway.ini
 
[General]
Callsign=N6DOZ
#Suffix=RPT
# Suffix=ND
Id=3150692
RptAddress=127.0.0.1
RptPort=62045
LocalAddress=127.0.0.1
LocalPort=62046
Daemon=0
 
[Network]
Startup=FCS00457
InactivityTimeout=10
Revert=0
Debug=0
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42001
 


Rudy N6DOZ
 
Edited

When I transmit to the TG, it looks like  MB sees it, but no audio on the other end.

I: 2020-05-16 20:36:39.678 MMDVM_Bridge:
I: 2020-05-16 20:36:39.679 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-16 20:36:39.679 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-05-16 20:36:39.679 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-05-16 20:36:39.679 This software is for use on amateur radio networks only,
I: 2020-05-16 20:36:39.679 it is to be used for educational purposes only. Its use on
I: 2020-05-16 20:36:39.679 commercial networks is strictly prohibited.
I: 2020-05-16 20:36:39.679 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-05-16 20:36:39.679 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-05-16 20:36:39.679 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)
I: 2020-05-16 20:36:39.679 General Parameters
I: 2020-05-16 20:36:39.679     Callsign: N6DOZ
I: 2020-05-16 20:36:39.679     Id: 315069250
I: 2020-05-16 20:36:39.679     Duplex: no
I: 2020-05-16 20:36:39.679     Timeout: 180s
I: 2020-05-16 20:36:39.679     DMR: enabled
I: 2020-05-16 20:36:39.680     YSF: enabled
M: 2020-05-16 20:36:39.681 Opening the MMDVM
I: 2020-05-16 20:36:39.681 Display Parameters
I: 2020-05-16 20:36:39.681     Type: 
I: 2020-05-16 20:36:39.681 DMR Network Parameters
I: 2020-05-16 20:36:39.681     Address: 3103.repeater.net
I: 2020-05-16 20:36:39.681     Port: 62031
I: 2020-05-16 20:36:39.681     Local: 62032
I: 2020-05-16 20:36:39.681     Jitter: 360ms
I: 2020-05-16 20:36:39.681     Slot 1: disabled
I: 2020-05-16 20:36:39.682     Slot 2: enabled
I: 2020-05-16 20:36:39.683 Info Parameters
I: 2020-05-16 20:36:39.683     Callsign: N6DOZ
M: 2020-05-16 20:36:39.684 DMR, Opening DMR Network
I: 2020-05-16 20:36:39.684 System Fusion Network Parameters
I: 2020-05-16 20:36:39.684     Local Address: 0
I: 2020-05-16 20:36:39.684     Local Port: 3201
I: 2020-05-16 20:36:39.684     Gateway Address: fcs004.xreflector.net
I: 2020-05-16 20:36:39.684     Gateway Port: 62500
I: 2020-05-16 20:36:39.684     Mode Hang: 3s
M: 2020-05-16 20:36:39.684 Opening YSF network connection
I: 2020-05-16 20:36:39.684 RSSI
I: 2020-05-16 20:36:39.684     Mapping File: RSSI.dat
W: 2020-05-16 20:36:39.685 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-16 20:36:39.685 DMR Id Lookups
I: 2020-05-16 20:36:39.685     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-16 20:36:39.685     Reload: 24 hours
I: 2020-05-16 20:36:39.847 Loaded 164578 Ids to the DMR callsign lookup table
I: 2020-05-16 20:36:39.847 DMR RF Parameters
I: 2020-05-16 20:36:39.847     Id: 315069250
I: 2020-05-16 20:36:39.847     Color Code: 1
I: 2020-05-16 20:36:39.847     Self Only: no
I: 2020-05-16 20:36:39.847     Embedded LC Only: yes
I: 2020-05-16 20:36:39.848     Dump Talker Alias Data: no
I: 2020-05-16 20:36:39.848     Prefixes: 0
I: 2020-05-16 20:36:39.848     Call Hang: 3s
I: 2020-05-16 20:36:39.848     TX Hang: 3s
I: 2020-05-16 20:36:39.848     Mode Hang: 10s
M: 2020-05-16 20:36:39.848 DMR, Opening INI file: DVSwitch.ini
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] TXPort -> 33100
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] RXPort -> 33103
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] Slot -> 2
M: 2020-05-16 20:36:39.848 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
I: 2020-05-16 20:36:39.848 YSF RF Parameters
I: 2020-05-16 20:36:39.848     Low Deviation: no
I: 2020-05-16 20:36:39.848     Remote Gateway: no
I: 2020-05-16 20:36:39.848     Self Only: no
I: 2020-05-16 20:36:39.848     DSQ: no
I: 2020-05-16 20:36:39.849     Mode Hang: 10s
M: 2020-05-16 20:36:39.849 YSF, Opening INI file: DVSwitch.ini
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] TXPort -> 33103
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] RXPort -> 33100
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] FallbackID -> 3135404
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] ExportTG -> 311620
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] Slot -> 2
M: 2020-05-16 20:36:39.849 YSF, Transmitting on 127.0.0.1:33103 and listening on port 33100.  Result = 1
M: 2020-05-16 20:36:39.849 MMDVM_Bridge-20191105_V1.4.1 is running
I: 2020-05-16 20:36:39.849 Started the DMR Id lookup reload thread
D: 2020-05-16 20:36:49.858 DMR, Sending authorisation
D: 2020-05-16 20:36:49.863 DMR, Sending configuration
M: 2020-05-16 20:36:49.868 DMR, Logged into the master successfully
M: 2020-05-16 20:37:35.663 DMR Slot 2, received network late entry from N6DOZ to TG 311620
M: 2020-05-16 20:37:35.663 YSF, TX state = ON
I: 2020-05-16 20:37:35.663 YSF, Begin TX: src=3135404 rpt=0 dst=311620 slot=2 cc=0 metadata=N6DOZ
I: 2020-05-16 20:37:35.724 YSF, Narrow transmit (72 bit)
M: 2020-05-16 20:37:36.264 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '
M: 2020-05-16 20:37:36.982 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'
M: 2020-05-16 20:37:38.182 DMR Slot 2, received network end of voice transmission, 2.6 seconds, 0% packet loss, BER: 0.0%
M: 2020-05-16 20:37:38.182 YSF, TX state = OFF


Steve N4IRS
 

To connect to FCS, you will need to use YSFGateway. (today)

Steve N4IRS

On 5/16/20 4:42 PM, Rudy N6DOZ wrote:

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge.

Is it possible to emulate the same idea, but to an FCS reflector?

BM_TG <-> MB <-> FCS00457

Here's my attempt at this (just realized, there's no entry for me to put the reflector number):

MMDVM.ini

[General]
Callsign=N6DOZ
Id=315069250
Timeout=180
Duplex=0

 

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

 

[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

 

[System Fusion Network] ; FCS
Enable=1
LocalAddress=0
LocalPort=3201
GatewayAddress=fcs004.xreflector.net
GatewayPort=62500
Debug=0


DVSwitch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             
TXPort = 33100                  
RXPort = 33103                  
Slot = 2                        
; Slot = 1                      
 
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1            
TXPort = 33103                 
RXPort = 33100                 
FallbackID = 3135404           
ExportTG = 311620               
Slot = 2                       


Q. Is this even possible? Or is there a different method to this? 

Thanks in advance, 7-3 N6DOZ.
 


Rudy N6DOZ
 

Thanks Steve.

I've been playing with the setup Eric K6KWB suggested and I get a "Segmentation fault (core dumped)" error.

Stand by for snips...


Steve N4IRS
 

What program is core dumping?

On 5/17/20 10:53 AM, Rudy N6DOZ wrote:

Thanks Steve.

I've been playing with the setup Eric K6KWB suggested and I get a "Segmentation fault (core dumped)" error.

Stand by for snips...



Rudy N6DOZ
 

MMDVM_Bridge 1.4.1.

Updated to MMDVM_Bridge 1.5.1 and got the same result.

uname -a

 

Linux vultr.guest 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

cat /etc/debian_version

buster/sid


Steve N4IRS
 
Edited

Are you telling me MMDVM_Bridge is segfaulting? if so, please post COMPLETE MMDVM_Bridge.ini
When does it segfault? At startup or when passing traffic?


Rudy N6DOZ
 

Setup is BM-TG <->MB_BM<->MB_YSF<->YSF Gateway<->FCS00457

 

 

MB_YSF:


I: 2020-05-17 15:06:03.798 General Parameters

I: 2020-05-17 15:06:03.798     Callsign: N6DOZ

I: 2020-05-17 15:06:03.798     Id: 3150692

I: 2020-05-17 15:06:03.798     Duplex: no

I: 2020-05-17 15:06:03.798     Timeout: 180s

I: 2020-05-17 15:06:03.798     DMR: enabled

I: 2020-05-17 15:06:03.798     YSF: disabled

I: 2020-05-17 15:06:03.798 Modem Parameters

I: 2020-05-17 15:06:03.798     Port: /dev/null

I: 2020-05-17 15:06:03.798     RX Invert: no

I: 2020-05-17 15:06:03.798     TX Invert: no

I: 2020-05-17 15:06:03.798     PTT Invert: no

I: 2020-05-17 15:06:03.798     TX Delay: 100ms

I: 2020-05-17 15:06:03.798     RX Offset: 0Hz

I: 2020-05-17 15:06:03.798     TX Offset: 0Hz

I: 2020-05-17 15:06:03.798     RX DC Offset: 0

I: 2020-05-17 15:06:03.798     TX DC Offset: 0

I: 2020-05-17 15:06:03.798     RF Level: 100.0%

I: 2020-05-17 15:06:03.798     DMR Delay: 0 (0.0ms)

I: 2020-05-17 15:06:03.798     RX Level: 50.0%

I: 2020-05-17 15:06:03.798     CW Id TX Level: 50.0%

I: 2020-05-17 15:06:03.798     D-Star TX Level: 50.0%

I: 2020-05-17 15:06:03.798     DMR TX Level: 50.0%

I: 2020-05-17 15:06:03.798     YSF TX Level: 50.0%

I: 2020-05-17 15:06:03.798     P25 TX Level: 50.0%

I: 2020-05-17 15:06:03.798     NXDN TX Level: 50.0%

I: 2020-05-17 15:06:03.798     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 15:06:03.798     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 15:06:03.798 Opening the MMDVM

I: 2020-05-17 15:06:03.798 Display Parameters

I: 2020-05-17 15:06:03.798     Type: 

I: 2020-05-17 15:06:03.798 RSSI

I: 2020-05-17 15:06:03.798     Mapping File: RSSI.dat

W: 2020-05-17 15:06:03.798 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 15:06:03.798 DMR Id Lookups

I: 2020-05-17 15:06:03.798     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 15:06:03.798     Reload: 24 hours

I: 2020-05-17 15:06:03.961 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 15:06:03.961 DMR RF Parameters

I: 2020-05-17 15:06:03.961     Id: 3150692

I: 2020-05-17 15:06:03.961     Color Code: 1

I: 2020-05-17 15:06:03.961     Self Only: no

I: 2020-05-17 15:06:03.961     Embedded LC Only: yes

I: 2020-05-17 15:06:03.961     Dump Talker Alias Data: no

I: 2020-05-17 15:06:03.961     Prefixes: 0

I: 2020-05-17 15:06:03.961     Call Hang: 4s

I: 2020-05-17 15:06:03.961     TX Hang: 4s

I: 2020-05-17 15:06:03.961     Mode Hang: 10s

M: 2020-05-17 15:06:03.961 DMR, Opening INI file: DVSwitch.ini

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] TXPort -> 34103

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] RXPort -> 34100

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Slot -> 2

M: 2020-05-17 15:06:03.962 DMR, Transmitting on 127.0.0.1:34103, and listening on port 34100.  Result = 1

M: 2020-05-17 15:06:03.962 MMDVM_Bridge-20200309_V1.5.1 is running

I: 2020-05-17 15:06:03.962 Started the DMR Id lookup reload thread

M: 2020-05-17 15:07:38.478 DMR, TX state = ON

I: 2020-05-17 15:07:38.478 DMR, Begin TX: src=3135404 rpt=0 dst=311620 slot=1 cc=0 metadata=N6DOZ

Segmentation fault (core dumped)

 

 

MB_BM

I: 2020-05-17 14:58:01.577 General Parameters

I: 2020-05-17 14:58:01.577     Callsign: N6DOZ

I: 2020-05-17 14:58:01.577     Id: 315069220

I: 2020-05-17 14:58:01.578     Duplex: no

I: 2020-05-17 14:58:01.578     Timeout: 180s

I: 2020-05-17 14:58:01.578     D-Star: disabled

I: 2020-05-17 14:58:01.578     DMR: enabled

I: 2020-05-17 14:58:01.578     YSF: disabled

I: 2020-05-17 14:58:01.578     P25: disabled

I: 2020-05-17 14:58:01.578     NXDN: disabled

I: 2020-05-17 14:58:01.578 Modem Parameters

I: 2020-05-17 14:58:01.578     Port: /dev/null

I: 2020-05-17 14:58:01.578     RX Invert: no

I: 2020-05-17 14:58:01.578     TX Invert: no

I: 2020-05-17 14:58:01.578     PTT Invert: no

I: 2020-05-17 14:58:01.578     TX Delay: 100ms

I: 2020-05-17 14:58:01.578     RX Offset: 0Hz

I: 2020-05-17 14:58:01.578     TX Offset: 0Hz

I: 2020-05-17 14:58:01.578     RX DC Offset: 0

I: 2020-05-17 14:58:01.578     TX DC Offset: 0

I: 2020-05-17 14:58:01.578     RF Level: 100.0%

I: 2020-05-17 14:58:01.578     DMR Delay: 0 (0.0ms)

I: 2020-05-17 14:58:01.579     RX Level: 50.0%

I: 2020-05-17 14:58:01.579     CW Id TX Level: 50.0%

I: 2020-05-17 14:58:01.579     D-Star TX Level: 50.0%

I: 2020-05-17 14:58:01.579     DMR TX Level: 50.0%

I: 2020-05-17 14:58:01.579     YSF TX Level: 50.0%

I: 2020-05-17 14:58:01.579     P25 TX Level: 50.0%

I: 2020-05-17 14:58:01.579     NXDN TX Level: 50.0%

I: 2020-05-17 14:58:01.579     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 14:58:01.579     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 14:58:01.580 Opening the MMDVM

I: 2020-05-17 14:58:01.580 Display Parameters

I: 2020-05-17 14:58:01.580     Type: 

I: 2020-05-17 14:58:01.580 DMR Network Parameters

I: 2020-05-17 14:58:01.580     Address: 3102.repeater.net

I: 2020-05-17 14:58:01.580     Port: 62031

I: 2020-05-17 14:58:01.580     Local: random

I: 2020-05-17 14:58:01.580     Jitter: 750ms

I: 2020-05-17 14:58:01.580     Slot 1: disabled

I: 2020-05-17 14:58:01.581     Slot 2: enabled

I: 2020-05-17 14:58:01.581     Mode Hang: 3s

I: 2020-05-17 14:58:01.582 Info Parameters

I: 2020-05-17 14:58:01.582     Callsign: N6DOZ

I: 2020-05-17 14:58:01.582     RX Frequency: 432100000Hz

I: 2020-05-17 14:58:01.582     TX Frequency: 432100100Hz

I: 2020-05-17 14:58:01.582     Power: 1W

I: 2020-05-17 14:58:01.583     Latitude: 37.654202deg N

I: 2020-05-17 14:58:01.583     Longitude: -122.429802deg E

I: 2020-05-17 14:58:01.583     Height: 16m

I: 2020-05-17 14:58:01.583     Location: "South San Francisco, CA USA"

I: 2020-05-17 14:58:01.583     Description: "FCS_MMDVM_BRIDGE"

I: 2020-05-17 14:58:01.583     URL: "http://www.kapihan.net"

M: 2020-05-17 14:58:01.583 DMR, Opening DMR Network

I: 2020-05-17 14:58:01.583 RSSI

I: 2020-05-17 14:58:01.583     Mapping File: RSSI.dat

W: 2020-05-17 14:58:01.583 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 14:58:01.583 DMR Id Lookups

I: 2020-05-17 14:58:01.583     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 14:58:01.583     Reload: 24 hours

I: 2020-05-17 14:58:01.754 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 14:58:01.755 DMR RF Parameters

I: 2020-05-17 14:58:01.755     Id: 315069220

I: 2020-05-17 14:58:01.755     Color Code: 1

I: 2020-05-17 14:58:01.755     Self Only: no

I: 2020-05-17 14:58:01.755     Embedded LC Only: yes

I: 2020-05-17 14:58:01.755     Dump Talker Alias Data: no

I: 2020-05-17 14:58:01.755     Prefixes: 0

I: 2020-05-17 14:58:01.755     Call Hang: 3s

I: 2020-05-17 14:58:01.755     TX Hang: 3s

I: 2020-05-17 14:58:01.755     Mode Hang: 10s

M: 2020-05-17 14:58:01.755 DMR, Opening INI file: DVSwitch.ini

I: 2020-05-17 14:58:01.756 Started the DMR Id lookup reload thread

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] TXPort -> 34100

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] RXPort -> 34103

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Slot -> 1

M: 2020-05-17 14:58:01.756 DMR, Transmitting on 127.0.0.1:34100, and listening on port 34103.  Result = 1

M: 2020-05-17 14:58:01.756 MMDVM_Bridge-20200309_V1.5.1 is running

D: 2020-05-17 14:58:11.801 DMR, Sending authorisation

D: 2020-05-17 14:58:11.847 DMR, Sending configuration

M: 2020-05-17 14:58:11.898 DMR, Logged into the master successfully

M: 2020-05-17 15:07:38.473 DMR Slot 2, received network late entry from N6DOZ to TG 311620

M: 2020-05-17 15:07:39.069 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '

M: 2020-05-17 15:07:39.791 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'

M: 2020-05-17 15:07:39.911 DMR Slot 2, received network end of voice transmission, 1.6 seconds, 0% packet loss, BER: 0.0%


YSFGateway

M: 2020-05-17 15:04:46.058 Opening YSF network connection

I: 2020-05-17 15:04:46.058 Opening UDP port on 62046

M: 2020-05-17 15:04:46.058 Resolving FCS00x addresses

M: 2020-05-17 15:04:46.060 Opening FCS network connection

I: 2020-05-17 15:04:46.060 Opening UDP port on 42002

I: 2020-05-17 15:04:46.060 The ID of this repeater is 00000

I: 2020-05-17 15:04:46.061 Loaded 800 FCS room descriptions

I: 2020-05-17 15:04:46.061 Loaded 825 YSF reflectors

I: 2020-05-17 15:04:46.061 Loaded YSF parrot

M: 2020-05-17 15:04:46.064 Automatic (re-)connection to FCS00457

M: 2020-05-17 15:04:46.065 Starting YSFGateway-20200405

 

M: 2020-05-17 15:04:46.223 Linked to FCS004-57

 


Rudy N6DOZ
 

It segfaults when passing traffic

MMDVM_Bridge.ini (MB_YSF)

[General]
Callsign=N6DOZ
Id=3150692
Timeout=180
Duplex=0
 
[Info]
RXFrequency=432100000
TXFrequency=432100100
Power=1
Latitude=37.6542
Longitude=-122.4298
Height=16
Location=South San Francisco, CA USA
Description=M2G_MMDVM_BRIDGE
URL=https://www.qrz.com/db/N6DOZ
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-M2F
 
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
 
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24
 
[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0
 
[D-Star]
Enable=0
Module=C
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=0
 
[P25]
Enable=0
NAC=293
 
[NXDN]
Enable=0
RAN=1
Id=12345
 
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
 
 
[DMR Network] ; to DMR
Enable=0
#Address=bm5151.hamradio.com.ph
# Address=3103.repeater.net
Address=127.0.0.1
Port=62051
Jitter=360
Local=62052
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0
 
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62046
GatewayAddress=127.0.0.1
GatewayPort=62045
Debug=0
 
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
 
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


Steve N4IRS
 

1: What is segfaulting?
2: show me the ini file NOT the log
3: DMR to YSF should look like this (only one instance of MB is needed)

BM <-> MB <-> YSFGateway <-> FCS Reflector

On 5/17/20 11:09 AM, Rudy N6DOZ wrote:

Setup is BM-TG <->MB_BM<->MB_YSF<->YSF Gateway<->FCS00457

 

 

MB_YSF:


I: 2020-05-17 15:06:03.798 General Parameters

I: 2020-05-17 15:06:03.798     Callsign: N6DOZ

I: 2020-05-17 15:06:03.798     Id: 3150692

I: 2020-05-17 15:06:03.798     Duplex: no

I: 2020-05-17 15:06:03.798     Timeout: 180s

I: 2020-05-17 15:06:03.798     DMR: enabled

I: 2020-05-17 15:06:03.798     YSF: disabled

I: 2020-05-17 15:06:03.798 Modem Parameters

I: 2020-05-17 15:06:03.798     Port: /dev/null

I: 2020-05-17 15:06:03.798     RX Invert: no

I: 2020-05-17 15:06:03.798     TX Invert: no

I: 2020-05-17 15:06:03.798     PTT Invert: no

I: 2020-05-17 15:06:03.798     TX Delay: 100ms

I: 2020-05-17 15:06:03.798     RX Offset: 0Hz

I: 2020-05-17 15:06:03.798     TX Offset: 0Hz

I: 2020-05-17 15:06:03.798     RX DC Offset: 0

I: 2020-05-17 15:06:03.798     TX DC Offset: 0

I: 2020-05-17 15:06:03.798     RF Level: 100.0%

I: 2020-05-17 15:06:03.798     DMR Delay: 0 (0.0ms)

I: 2020-05-17 15:06:03.798     RX Level: 50.0%

I: 2020-05-17 15:06:03.798     CW Id TX Level: 50.0%

I: 2020-05-17 15:06:03.798     D-Star TX Level: 50.0%

I: 2020-05-17 15:06:03.798     DMR TX Level: 50.0%

I: 2020-05-17 15:06:03.798     YSF TX Level: 50.0%

I: 2020-05-17 15:06:03.798     P25 TX Level: 50.0%

I: 2020-05-17 15:06:03.798     NXDN TX Level: 50.0%

I: 2020-05-17 15:06:03.798     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 15:06:03.798     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 15:06:03.798 Opening the MMDVM

I: 2020-05-17 15:06:03.798 Display Parameters

I: 2020-05-17 15:06:03.798     Type: 

I: 2020-05-17 15:06:03.798 RSSI

I: 2020-05-17 15:06:03.798     Mapping File: RSSI.dat

W: 2020-05-17 15:06:03.798 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 15:06:03.798 DMR Id Lookups

I: 2020-05-17 15:06:03.798     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 15:06:03.798     Reload: 24 hours

I: 2020-05-17 15:06:03.961 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 15:06:03.961 DMR RF Parameters

I: 2020-05-17 15:06:03.961     Id: 3150692

I: 2020-05-17 15:06:03.961     Color Code: 1

I: 2020-05-17 15:06:03.961     Self Only: no

I: 2020-05-17 15:06:03.961     Embedded LC Only: yes

I: 2020-05-17 15:06:03.961     Dump Talker Alias Data: no

I: 2020-05-17 15:06:03.961     Prefixes: 0

I: 2020-05-17 15:06:03.961     Call Hang: 4s

I: 2020-05-17 15:06:03.961     TX Hang: 4s

I: 2020-05-17 15:06:03.961     Mode Hang: 10s

M: 2020-05-17 15:06:03.961 DMR, Opening INI file: DVSwitch.ini

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] TXPort -> 34103

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] RXPort -> 34100

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Slot -> 2

M: 2020-05-17 15:06:03.962 DMR, Transmitting on 127.0.0.1:34103, and listening on port 34100.  Result = 1

M: 2020-05-17 15:06:03.962 MMDVM_Bridge-20200309_V1.5.1 is running

I: 2020-05-17 15:06:03.962 Started the DMR Id lookup reload thread

M: 2020-05-17 15:07:38.478 DMR, TX state = ON

I: 2020-05-17 15:07:38.478 DMR, Begin TX: src=3135404 rpt=0 dst=311620 slot=1 cc=0 metadata=N6DOZ

Segmentation fault (core dumped)

 

 

MB_BM

I: 2020-05-17 14:58:01.577 General Parameters

I: 2020-05-17 14:58:01.577     Callsign: N6DOZ

I: 2020-05-17 14:58:01.577     Id: 315069220

I: 2020-05-17 14:58:01.578     Duplex: no

I: 2020-05-17 14:58:01.578     Timeout: 180s

I: 2020-05-17 14:58:01.578     D-Star: disabled

I: 2020-05-17 14:58:01.578     DMR: enabled

I: 2020-05-17 14:58:01.578     YSF: disabled

I: 2020-05-17 14:58:01.578     P25: disabled

I: 2020-05-17 14:58:01.578     NXDN: disabled

I: 2020-05-17 14:58:01.578 Modem Parameters

I: 2020-05-17 14:58:01.578     Port: /dev/null

I: 2020-05-17 14:58:01.578     RX Invert: no

I: 2020-05-17 14:58:01.578     TX Invert: no

I: 2020-05-17 14:58:01.578     PTT Invert: no

I: 2020-05-17 14:58:01.578     TX Delay: 100ms

I: 2020-05-17 14:58:01.578     RX Offset: 0Hz

I: 2020-05-17 14:58:01.578     TX Offset: 0Hz

I: 2020-05-17 14:58:01.578     RX DC Offset: 0

I: 2020-05-17 14:58:01.578     TX DC Offset: 0

I: 2020-05-17 14:58:01.578     RF Level: 100.0%

I: 2020-05-17 14:58:01.578     DMR Delay: 0 (0.0ms)

I: 2020-05-17 14:58:01.579     RX Level: 50.0%

I: 2020-05-17 14:58:01.579     CW Id TX Level: 50.0%

I: 2020-05-17 14:58:01.579     D-Star TX Level: 50.0%

I: 2020-05-17 14:58:01.579     DMR TX Level: 50.0%

I: 2020-05-17 14:58:01.579     YSF TX Level: 50.0%

I: 2020-05-17 14:58:01.579     P25 TX Level: 50.0%

I: 2020-05-17 14:58:01.579     NXDN TX Level: 50.0%

I: 2020-05-17 14:58:01.579     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 14:58:01.579     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 14:58:01.580 Opening the MMDVM

I: 2020-05-17 14:58:01.580 Display Parameters

I: 2020-05-17 14:58:01.580     Type: 

I: 2020-05-17 14:58:01.580 DMR Network Parameters

I: 2020-05-17 14:58:01.580     Address: 3102.repeater.net

I: 2020-05-17 14:58:01.580     Port: 62031

I: 2020-05-17 14:58:01.580     Local: random

I: 2020-05-17 14:58:01.580     Jitter: 750ms

I: 2020-05-17 14:58:01.580     Slot 1: disabled

I: 2020-05-17 14:58:01.581     Slot 2: enabled

I: 2020-05-17 14:58:01.581     Mode Hang: 3s

I: 2020-05-17 14:58:01.582 Info Parameters

I: 2020-05-17 14:58:01.582     Callsign: N6DOZ

I: 2020-05-17 14:58:01.582     RX Frequency: 432100000Hz

I: 2020-05-17 14:58:01.582     TX Frequency: 432100100Hz

I: 2020-05-17 14:58:01.582     Power: 1W

I: 2020-05-17 14:58:01.583     Latitude: 37.654202deg N

I: 2020-05-17 14:58:01.583     Longitude: -122.429802deg E

I: 2020-05-17 14:58:01.583     Height: 16m

I: 2020-05-17 14:58:01.583     Location: "South San Francisco, CA USA"

I: 2020-05-17 14:58:01.583     Description: "FCS_MMDVM_BRIDGE"

I: 2020-05-17 14:58:01.583     URL: "http://www.kapihan.net"

M: 2020-05-17 14:58:01.583 DMR, Opening DMR Network

I: 2020-05-17 14:58:01.583 RSSI

I: 2020-05-17 14:58:01.583     Mapping File: RSSI.dat

W: 2020-05-17 14:58:01.583 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 14:58:01.583 DMR Id Lookups

I: 2020-05-17 14:58:01.583     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 14:58:01.583     Reload: 24 hours

I: 2020-05-17 14:58:01.754 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 14:58:01.755 DMR RF Parameters

I: 2020-05-17 14:58:01.755     Id: 315069220

I: 2020-05-17 14:58:01.755     Color Code: 1

I: 2020-05-17 14:58:01.755     Self Only: no

I: 2020-05-17 14:58:01.755     Embedded LC Only: yes

I: 2020-05-17 14:58:01.755     Dump Talker Alias Data: no

I: 2020-05-17 14:58:01.755     Prefixes: 0

I: 2020-05-17 14:58:01.755     Call Hang: 3s

I: 2020-05-17 14:58:01.755     TX Hang: 3s

I: 2020-05-17 14:58:01.755     Mode Hang: 10s

M: 2020-05-17 14:58:01.755 DMR, Opening INI file: DVSwitch.ini

I: 2020-05-17 14:58:01.756 Started the DMR Id lookup reload thread

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] TXPort -> 34100

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] RXPort -> 34103

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Slot -> 1

M: 2020-05-17 14:58:01.756 DMR, Transmitting on 127.0.0.1:34100, and listening on port 34103.  Result = 1

M: 2020-05-17 14:58:01.756 MMDVM_Bridge-20200309_V1.5.1 is running

D: 2020-05-17 14:58:11.801 DMR, Sending authorisation

D: 2020-05-17 14:58:11.847 DMR, Sending configuration

M: 2020-05-17 14:58:11.898 DMR, Logged into the master successfully

M: 2020-05-17 15:07:38.473 DMR Slot 2, received network late entry from N6DOZ to TG 311620

M: 2020-05-17 15:07:39.069 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '

M: 2020-05-17 15:07:39.791 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'

M: 2020-05-17 15:07:39.911 DMR Slot 2, received network end of voice transmission, 1.6 seconds, 0% packet loss, BER: 0.0%


YSFGateway

M: 2020-05-17 15:04:46.058 Opening YSF network connection

I: 2020-05-17 15:04:46.058 Opening UDP port on 62046

M: 2020-05-17 15:04:46.058 Resolving FCS00x addresses

M: 2020-05-17 15:04:46.060 Opening FCS network connection

I: 2020-05-17 15:04:46.060 Opening UDP port on 42002

I: 2020-05-17 15:04:46.060 The ID of this repeater is 00000

I: 2020-05-17 15:04:46.061 Loaded 800 FCS room descriptions

I: 2020-05-17 15:04:46.061 Loaded 825 YSF reflectors

I: 2020-05-17 15:04:46.061 Loaded YSF parrot

M: 2020-05-17 15:04:46.064 Automatic (re-)connection to FCS00457

M: 2020-05-17 15:04:46.065 Starting YSFGateway-20200405

 

M: 2020-05-17 15:04:46.223 Linked to FCS004-57

 


Steve N4IRS
 

[General]
Callsign=N0CALL
Id=1234567
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0

[D-Star]
Enable=0
Module=C

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=1

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=1
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
Debug=0

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


Rudy N6DOZ
 

I'll reconstruct the chain as such.

BM <-> MB <-> YSFGateway <-> FCS Reflector

 


Steve N4IRS
 

Correct. Cross connect YSF to DMR in DVSwitch.ini TX to RX RX to TX

On 5/17/20 11:39 AM, Rudy N6DOZ wrote:

I'll reconstruct the chain as such.

BM <-> MB <-> YSFGateway <-> FCS Reflector

 


Rudy N6DOZ
 
Edited

 
 
 
Steve, thanks a ton :) Got it working!
 
BM <-> MB <-> YSFGateway <-> FCS Reflector
 
Here's are ini snips so folks can refer to it (with just the important parts).
 
 
MMDVM_Bridge.ini
 
[General]
Callsign=N6DOZ
Id=315069220
Timeout=180
Duplex=0
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-DMX
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Password=passw0rd
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62045
GatewayAddress=127.0.0.1
GatewayPort=62046
Debug=0
 
 
 
DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                  
Slot = 2                      
                  
 
[YSF]
Address = 127.0.0.1              
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                        
 
 
YSFGateway.ini
 
[General]
Callsign=N6DOZ
#Suffix=RPT
# Suffix=ND
Id=3150692
RptAddress=127.0.0.1
RptPort=62045
LocalAddress=127.0.0.1
LocalPort=62046
Daemon=0
 
[Network]
Startup=FCS00457
InactivityTimeout=10
Revert=1
Debug=0
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42002     

# Port=42002 - Make sure this doesn't run into a YSFReflector or XLXReflector running on the same machine
 


Kevin Halton
 

Jumping in here, I want to make certain I understand. In dvswitch.ini  dmr is 31100 TX and 31103 RX and YSF is 35100 TX and 35103 RX. So I would change ysf RX to 31100 and ysf TX to 31103 ? Make any TG / Reflector changes and restart?

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve N4IRS
Sent: Sunday, May 17, 2020 11:41 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge

 

Correct. Cross connect YSF to DMR in DVSwitch.ini TX to RX RX to TX

On 5/17/20 11:39 AM, Rudy N6DOZ wrote:

I'll reconstruct the chain as such.

BM <-> MB <-> YSFGateway <-> FCS Reflector

 

 


Rudy N6DOZ
 
Edited

Kevin,

The ports would have to cross, yes. Here's that segment in my working DVSwitch.ini

DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                  
Slot = 2                      
                   
 
[YSF]
Address = 127.0.0.1             
;Address = 45.77.186.5          
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                       


Eric-K6KWB
 

Yes Rudy my appologies, I realized you use to two instances of MB for DMRGateway. I'm glad you made it work and thanks Steve N4IRS.
best, 73 Eric


Eric-K6KWB
 

Its been a while when I made a bridge for FCS realizing I have no DMR connectivity and using two sets of MB looks like this:
YSF reflector<->MB-YSF<->MB_FCS<->YSF gateway and its working!
73, Eric