Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge


Eric-K6KWB
 

Its been a while when I made a bridge for FCS realizing I have no DMR connectivity and using two sets of MB looks like this:
YSF reflector<->MB-YSF<->MB_FCS<->YSF gateway and its working!
73, Eric


Eric-K6KWB
 

Yes Rudy my appologies, I realized you use to two instances of MB for DMRGateway. I'm glad you made it work and thanks Steve N4IRS.
best, 73 Eric


Rudy N6DOZ
 
Edited

Kevin,

The ports would have to cross, yes. Here's that segment in my working DVSwitch.ini

DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                  
Slot = 2                      
                   
 
[YSF]
Address = 127.0.0.1             
;Address = 45.77.186.5          
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                       


Kevin Halton
 

Jumping in here, I want to make certain I understand. In dvswitch.ini  dmr is 31100 TX and 31103 RX and YSF is 35100 TX and 35103 RX. So I would change ysf RX to 31100 and ysf TX to 31103 ? Make any TG / Reflector changes and restart?

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve N4IRS
Sent: Sunday, May 17, 2020 11:41 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge

 

Correct. Cross connect YSF to DMR in DVSwitch.ini TX to RX RX to TX

On 5/17/20 11:39 AM, Rudy N6DOZ wrote:

I'll reconstruct the chain as such.

BM <-> MB <-> YSFGateway <-> FCS Reflector

 

 


Rudy N6DOZ
 
Edited

 
 
 
Steve, thanks a ton :) Got it working!
 
BM <-> MB <-> YSFGateway <-> FCS Reflector
 
Here's are ini snips so folks can refer to it (with just the important parts).
 
 
MMDVM_Bridge.ini
 
[General]
Callsign=N6DOZ
Id=315069220
Timeout=180
Duplex=0
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-DMX
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Password=passw0rd
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62045
GatewayAddress=127.0.0.1
GatewayPort=62046
Debug=0
 
 
 
DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                  
Slot = 2                      
                  
 
[YSF]
Address = 127.0.0.1              
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                        
 
 
YSFGateway.ini
 
[General]
Callsign=N6DOZ
#Suffix=RPT
# Suffix=ND
Id=3150692
RptAddress=127.0.0.1
RptPort=62045
LocalAddress=127.0.0.1
LocalPort=62046
Daemon=0
 
[Network]
Startup=FCS00457
InactivityTimeout=10
Revert=1
Debug=0
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42002     

# Port=42002 - Make sure this doesn't run into a YSFReflector or XLXReflector running on the same machine
 


Steve N4IRS
 

Correct. Cross connect YSF to DMR in DVSwitch.ini TX to RX RX to TX

On 5/17/20 11:39 AM, Rudy N6DOZ wrote:

I'll reconstruct the chain as such.

BM <-> MB <-> YSFGateway <-> FCS Reflector

 


Rudy N6DOZ
 

I'll reconstruct the chain as such.

BM <-> MB <-> YSFGateway <-> FCS Reflector

 


Steve N4IRS
 

[General]
Callsign=N0CALL
Id=1234567
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0

[D-Star]
Enable=0
Module=C

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=1

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=1
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
Debug=0

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


Steve N4IRS
 

1: What is segfaulting?
2: show me the ini file NOT the log
3: DMR to YSF should look like this (only one instance of MB is needed)

BM <-> MB <-> YSFGateway <-> FCS Reflector

On 5/17/20 11:09 AM, Rudy N6DOZ wrote:

Setup is BM-TG <->MB_BM<->MB_YSF<->YSF Gateway<->FCS00457

 

 

MB_YSF:


I: 2020-05-17 15:06:03.798 General Parameters

I: 2020-05-17 15:06:03.798     Callsign: N6DOZ

I: 2020-05-17 15:06:03.798     Id: 3150692

I: 2020-05-17 15:06:03.798     Duplex: no

I: 2020-05-17 15:06:03.798     Timeout: 180s

I: 2020-05-17 15:06:03.798     DMR: enabled

I: 2020-05-17 15:06:03.798     YSF: disabled

I: 2020-05-17 15:06:03.798 Modem Parameters

I: 2020-05-17 15:06:03.798     Port: /dev/null

I: 2020-05-17 15:06:03.798     RX Invert: no

I: 2020-05-17 15:06:03.798     TX Invert: no

I: 2020-05-17 15:06:03.798     PTT Invert: no

I: 2020-05-17 15:06:03.798     TX Delay: 100ms

I: 2020-05-17 15:06:03.798     RX Offset: 0Hz

I: 2020-05-17 15:06:03.798     TX Offset: 0Hz

I: 2020-05-17 15:06:03.798     RX DC Offset: 0

I: 2020-05-17 15:06:03.798     TX DC Offset: 0

I: 2020-05-17 15:06:03.798     RF Level: 100.0%

I: 2020-05-17 15:06:03.798     DMR Delay: 0 (0.0ms)

I: 2020-05-17 15:06:03.798     RX Level: 50.0%

I: 2020-05-17 15:06:03.798     CW Id TX Level: 50.0%

I: 2020-05-17 15:06:03.798     D-Star TX Level: 50.0%

I: 2020-05-17 15:06:03.798     DMR TX Level: 50.0%

I: 2020-05-17 15:06:03.798     YSF TX Level: 50.0%

I: 2020-05-17 15:06:03.798     P25 TX Level: 50.0%

I: 2020-05-17 15:06:03.798     NXDN TX Level: 50.0%

I: 2020-05-17 15:06:03.798     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 15:06:03.798     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 15:06:03.798 Opening the MMDVM

I: 2020-05-17 15:06:03.798 Display Parameters

I: 2020-05-17 15:06:03.798     Type: 

I: 2020-05-17 15:06:03.798 RSSI

I: 2020-05-17 15:06:03.798     Mapping File: RSSI.dat

W: 2020-05-17 15:06:03.798 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 15:06:03.798 DMR Id Lookups

I: 2020-05-17 15:06:03.798     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 15:06:03.798     Reload: 24 hours

I: 2020-05-17 15:06:03.961 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 15:06:03.961 DMR RF Parameters

I: 2020-05-17 15:06:03.961     Id: 3150692

I: 2020-05-17 15:06:03.961     Color Code: 1

I: 2020-05-17 15:06:03.961     Self Only: no

I: 2020-05-17 15:06:03.961     Embedded LC Only: yes

I: 2020-05-17 15:06:03.961     Dump Talker Alias Data: no

I: 2020-05-17 15:06:03.961     Prefixes: 0

I: 2020-05-17 15:06:03.961     Call Hang: 4s

I: 2020-05-17 15:06:03.961     TX Hang: 4s

I: 2020-05-17 15:06:03.961     Mode Hang: 10s

M: 2020-05-17 15:06:03.961 DMR, Opening INI file: DVSwitch.ini

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] TXPort -> 34103

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] RXPort -> 34100

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Slot -> 2

M: 2020-05-17 15:06:03.962 DMR, Transmitting on 127.0.0.1:34103, and listening on port 34100.  Result = 1

M: 2020-05-17 15:06:03.962 MMDVM_Bridge-20200309_V1.5.1 is running

I: 2020-05-17 15:06:03.962 Started the DMR Id lookup reload thread

M: 2020-05-17 15:07:38.478 DMR, TX state = ON

I: 2020-05-17 15:07:38.478 DMR, Begin TX: src=3135404 rpt=0 dst=311620 slot=1 cc=0 metadata=N6DOZ

Segmentation fault (core dumped)

 

 

MB_BM

I: 2020-05-17 14:58:01.577 General Parameters

I: 2020-05-17 14:58:01.577     Callsign: N6DOZ

I: 2020-05-17 14:58:01.577     Id: 315069220

I: 2020-05-17 14:58:01.578     Duplex: no

I: 2020-05-17 14:58:01.578     Timeout: 180s

I: 2020-05-17 14:58:01.578     D-Star: disabled

I: 2020-05-17 14:58:01.578     DMR: enabled

I: 2020-05-17 14:58:01.578     YSF: disabled

I: 2020-05-17 14:58:01.578     P25: disabled

I: 2020-05-17 14:58:01.578     NXDN: disabled

I: 2020-05-17 14:58:01.578 Modem Parameters

I: 2020-05-17 14:58:01.578     Port: /dev/null

I: 2020-05-17 14:58:01.578     RX Invert: no

I: 2020-05-17 14:58:01.578     TX Invert: no

I: 2020-05-17 14:58:01.578     PTT Invert: no

I: 2020-05-17 14:58:01.578     TX Delay: 100ms

I: 2020-05-17 14:58:01.578     RX Offset: 0Hz

I: 2020-05-17 14:58:01.578     TX Offset: 0Hz

I: 2020-05-17 14:58:01.578     RX DC Offset: 0

I: 2020-05-17 14:58:01.578     TX DC Offset: 0

I: 2020-05-17 14:58:01.578     RF Level: 100.0%

I: 2020-05-17 14:58:01.578     DMR Delay: 0 (0.0ms)

I: 2020-05-17 14:58:01.579     RX Level: 50.0%

I: 2020-05-17 14:58:01.579     CW Id TX Level: 50.0%

I: 2020-05-17 14:58:01.579     D-Star TX Level: 50.0%

I: 2020-05-17 14:58:01.579     DMR TX Level: 50.0%

I: 2020-05-17 14:58:01.579     YSF TX Level: 50.0%

I: 2020-05-17 14:58:01.579     P25 TX Level: 50.0%

I: 2020-05-17 14:58:01.579     NXDN TX Level: 50.0%

I: 2020-05-17 14:58:01.579     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 14:58:01.579     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 14:58:01.580 Opening the MMDVM

I: 2020-05-17 14:58:01.580 Display Parameters

I: 2020-05-17 14:58:01.580     Type: 

I: 2020-05-17 14:58:01.580 DMR Network Parameters

I: 2020-05-17 14:58:01.580     Address: 3102.repeater.net

I: 2020-05-17 14:58:01.580     Port: 62031

I: 2020-05-17 14:58:01.580     Local: random

I: 2020-05-17 14:58:01.580     Jitter: 750ms

I: 2020-05-17 14:58:01.580     Slot 1: disabled

I: 2020-05-17 14:58:01.581     Slot 2: enabled

I: 2020-05-17 14:58:01.581     Mode Hang: 3s

I: 2020-05-17 14:58:01.582 Info Parameters

I: 2020-05-17 14:58:01.582     Callsign: N6DOZ

I: 2020-05-17 14:58:01.582     RX Frequency: 432100000Hz

I: 2020-05-17 14:58:01.582     TX Frequency: 432100100Hz

I: 2020-05-17 14:58:01.582     Power: 1W

I: 2020-05-17 14:58:01.583     Latitude: 37.654202deg N

I: 2020-05-17 14:58:01.583     Longitude: -122.429802deg E

I: 2020-05-17 14:58:01.583     Height: 16m

I: 2020-05-17 14:58:01.583     Location: "South San Francisco, CA USA"

I: 2020-05-17 14:58:01.583     Description: "FCS_MMDVM_BRIDGE"

I: 2020-05-17 14:58:01.583     URL: "http://www.kapihan.net"

M: 2020-05-17 14:58:01.583 DMR, Opening DMR Network

I: 2020-05-17 14:58:01.583 RSSI

I: 2020-05-17 14:58:01.583     Mapping File: RSSI.dat

W: 2020-05-17 14:58:01.583 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 14:58:01.583 DMR Id Lookups

I: 2020-05-17 14:58:01.583     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 14:58:01.583     Reload: 24 hours

I: 2020-05-17 14:58:01.754 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 14:58:01.755 DMR RF Parameters

I: 2020-05-17 14:58:01.755     Id: 315069220

I: 2020-05-17 14:58:01.755     Color Code: 1

I: 2020-05-17 14:58:01.755     Self Only: no

I: 2020-05-17 14:58:01.755     Embedded LC Only: yes

I: 2020-05-17 14:58:01.755     Dump Talker Alias Data: no

I: 2020-05-17 14:58:01.755     Prefixes: 0

I: 2020-05-17 14:58:01.755     Call Hang: 3s

I: 2020-05-17 14:58:01.755     TX Hang: 3s

I: 2020-05-17 14:58:01.755     Mode Hang: 10s

M: 2020-05-17 14:58:01.755 DMR, Opening INI file: DVSwitch.ini

I: 2020-05-17 14:58:01.756 Started the DMR Id lookup reload thread

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] TXPort -> 34100

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] RXPort -> 34103

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Slot -> 1

M: 2020-05-17 14:58:01.756 DMR, Transmitting on 127.0.0.1:34100, and listening on port 34103.  Result = 1

M: 2020-05-17 14:58:01.756 MMDVM_Bridge-20200309_V1.5.1 is running

D: 2020-05-17 14:58:11.801 DMR, Sending authorisation

D: 2020-05-17 14:58:11.847 DMR, Sending configuration

M: 2020-05-17 14:58:11.898 DMR, Logged into the master successfully

M: 2020-05-17 15:07:38.473 DMR Slot 2, received network late entry from N6DOZ to TG 311620

M: 2020-05-17 15:07:39.069 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '

M: 2020-05-17 15:07:39.791 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'

M: 2020-05-17 15:07:39.911 DMR Slot 2, received network end of voice transmission, 1.6 seconds, 0% packet loss, BER: 0.0%


YSFGateway

M: 2020-05-17 15:04:46.058 Opening YSF network connection

I: 2020-05-17 15:04:46.058 Opening UDP port on 62046

M: 2020-05-17 15:04:46.058 Resolving FCS00x addresses

M: 2020-05-17 15:04:46.060 Opening FCS network connection

I: 2020-05-17 15:04:46.060 Opening UDP port on 42002

I: 2020-05-17 15:04:46.060 The ID of this repeater is 00000

I: 2020-05-17 15:04:46.061 Loaded 800 FCS room descriptions

I: 2020-05-17 15:04:46.061 Loaded 825 YSF reflectors

I: 2020-05-17 15:04:46.061 Loaded YSF parrot

M: 2020-05-17 15:04:46.064 Automatic (re-)connection to FCS00457

M: 2020-05-17 15:04:46.065 Starting YSFGateway-20200405

 

M: 2020-05-17 15:04:46.223 Linked to FCS004-57

 


Rudy N6DOZ
 

It segfaults when passing traffic

MMDVM_Bridge.ini (MB_YSF)

[General]
Callsign=N6DOZ
Id=3150692
Timeout=180
Duplex=0
 
[Info]
RXFrequency=432100000
TXFrequency=432100100
Power=1
Latitude=37.6542
Longitude=-122.4298
Height=16
Location=South San Francisco, CA USA
Description=M2G_MMDVM_BRIDGE
URL=https://www.qrz.com/db/N6DOZ
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-M2F
 
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
 
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24
 
[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0
 
[D-Star]
Enable=0
Module=C
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=0
 
[P25]
Enable=0
NAC=293
 
[NXDN]
Enable=0
RAN=1
Id=12345
 
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
 
 
[DMR Network] ; to DMR
Enable=0
#Address=bm5151.hamradio.com.ph
# Address=3103.repeater.net
Address=127.0.0.1
Port=62051
Jitter=360
Local=62052
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0
 
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62046
GatewayAddress=127.0.0.1
GatewayPort=62045
Debug=0
 
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
 
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


Rudy N6DOZ
 

Setup is BM-TG <->MB_BM<->MB_YSF<->YSF Gateway<->FCS00457

 

 

MB_YSF:


I: 2020-05-17 15:06:03.798 General Parameters

I: 2020-05-17 15:06:03.798     Callsign: N6DOZ

I: 2020-05-17 15:06:03.798     Id: 3150692

I: 2020-05-17 15:06:03.798     Duplex: no

I: 2020-05-17 15:06:03.798     Timeout: 180s

I: 2020-05-17 15:06:03.798     DMR: enabled

I: 2020-05-17 15:06:03.798     YSF: disabled

I: 2020-05-17 15:06:03.798 Modem Parameters

I: 2020-05-17 15:06:03.798     Port: /dev/null

I: 2020-05-17 15:06:03.798     RX Invert: no

I: 2020-05-17 15:06:03.798     TX Invert: no

I: 2020-05-17 15:06:03.798     PTT Invert: no

I: 2020-05-17 15:06:03.798     TX Delay: 100ms

I: 2020-05-17 15:06:03.798     RX Offset: 0Hz

I: 2020-05-17 15:06:03.798     TX Offset: 0Hz

I: 2020-05-17 15:06:03.798     RX DC Offset: 0

I: 2020-05-17 15:06:03.798     TX DC Offset: 0

I: 2020-05-17 15:06:03.798     RF Level: 100.0%

I: 2020-05-17 15:06:03.798     DMR Delay: 0 (0.0ms)

I: 2020-05-17 15:06:03.798     RX Level: 50.0%

I: 2020-05-17 15:06:03.798     CW Id TX Level: 50.0%

I: 2020-05-17 15:06:03.798     D-Star TX Level: 50.0%

I: 2020-05-17 15:06:03.798     DMR TX Level: 50.0%

I: 2020-05-17 15:06:03.798     YSF TX Level: 50.0%

I: 2020-05-17 15:06:03.798     P25 TX Level: 50.0%

I: 2020-05-17 15:06:03.798     NXDN TX Level: 50.0%

I: 2020-05-17 15:06:03.798     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 15:06:03.798     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 15:06:03.798 Opening the MMDVM

I: 2020-05-17 15:06:03.798 Display Parameters

I: 2020-05-17 15:06:03.798     Type: 

I: 2020-05-17 15:06:03.798 RSSI

I: 2020-05-17 15:06:03.798     Mapping File: RSSI.dat

W: 2020-05-17 15:06:03.798 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 15:06:03.798 DMR Id Lookups

I: 2020-05-17 15:06:03.798     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 15:06:03.798     Reload: 24 hours

I: 2020-05-17 15:06:03.961 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 15:06:03.961 DMR RF Parameters

I: 2020-05-17 15:06:03.961     Id: 3150692

I: 2020-05-17 15:06:03.961     Color Code: 1

I: 2020-05-17 15:06:03.961     Self Only: no

I: 2020-05-17 15:06:03.961     Embedded LC Only: yes

I: 2020-05-17 15:06:03.961     Dump Talker Alias Data: no

I: 2020-05-17 15:06:03.961     Prefixes: 0

I: 2020-05-17 15:06:03.961     Call Hang: 4s

I: 2020-05-17 15:06:03.961     TX Hang: 4s

I: 2020-05-17 15:06:03.961     Mode Hang: 10s

M: 2020-05-17 15:06:03.961 DMR, Opening INI file: DVSwitch.ini

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] TXPort -> 34103

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] RXPort -> 34100

M: 2020-05-17 15:06:03.962 DMR, Setting [DMR] Slot -> 2

M: 2020-05-17 15:06:03.962 DMR, Transmitting on 127.0.0.1:34103, and listening on port 34100.  Result = 1

M: 2020-05-17 15:06:03.962 MMDVM_Bridge-20200309_V1.5.1 is running

I: 2020-05-17 15:06:03.962 Started the DMR Id lookup reload thread

M: 2020-05-17 15:07:38.478 DMR, TX state = ON

I: 2020-05-17 15:07:38.478 DMR, Begin TX: src=3135404 rpt=0 dst=311620 slot=1 cc=0 metadata=N6DOZ

Segmentation fault (core dumped)

 

 

MB_BM

I: 2020-05-17 14:58:01.577 General Parameters

I: 2020-05-17 14:58:01.577     Callsign: N6DOZ

I: 2020-05-17 14:58:01.577     Id: 315069220

I: 2020-05-17 14:58:01.578     Duplex: no

I: 2020-05-17 14:58:01.578     Timeout: 180s

I: 2020-05-17 14:58:01.578     D-Star: disabled

I: 2020-05-17 14:58:01.578     DMR: enabled

I: 2020-05-17 14:58:01.578     YSF: disabled

I: 2020-05-17 14:58:01.578     P25: disabled

I: 2020-05-17 14:58:01.578     NXDN: disabled

I: 2020-05-17 14:58:01.578 Modem Parameters

I: 2020-05-17 14:58:01.578     Port: /dev/null

I: 2020-05-17 14:58:01.578     RX Invert: no

I: 2020-05-17 14:58:01.578     TX Invert: no

I: 2020-05-17 14:58:01.578     PTT Invert: no

I: 2020-05-17 14:58:01.578     TX Delay: 100ms

I: 2020-05-17 14:58:01.578     RX Offset: 0Hz

I: 2020-05-17 14:58:01.578     TX Offset: 0Hz

I: 2020-05-17 14:58:01.578     RX DC Offset: 0

I: 2020-05-17 14:58:01.578     TX DC Offset: 0

I: 2020-05-17 14:58:01.578     RF Level: 100.0%

I: 2020-05-17 14:58:01.578     DMR Delay: 0 (0.0ms)

I: 2020-05-17 14:58:01.579     RX Level: 50.0%

I: 2020-05-17 14:58:01.579     CW Id TX Level: 50.0%

I: 2020-05-17 14:58:01.579     D-Star TX Level: 50.0%

I: 2020-05-17 14:58:01.579     DMR TX Level: 50.0%

I: 2020-05-17 14:58:01.579     YSF TX Level: 50.0%

I: 2020-05-17 14:58:01.579     P25 TX Level: 50.0%

I: 2020-05-17 14:58:01.579     NXDN TX Level: 50.0%

I: 2020-05-17 14:58:01.579     RX Frequency: 432100000Hz (432100000Hz)

I: 2020-05-17 14:58:01.579     TX Frequency: 432100100Hz (432100100Hz)

M: 2020-05-17 14:58:01.580 Opening the MMDVM

I: 2020-05-17 14:58:01.580 Display Parameters

I: 2020-05-17 14:58:01.580     Type: 

I: 2020-05-17 14:58:01.580 DMR Network Parameters

I: 2020-05-17 14:58:01.580     Address: 3102.repeater.net

I: 2020-05-17 14:58:01.580     Port: 62031

I: 2020-05-17 14:58:01.580     Local: random

I: 2020-05-17 14:58:01.580     Jitter: 750ms

I: 2020-05-17 14:58:01.580     Slot 1: disabled

I: 2020-05-17 14:58:01.581     Slot 2: enabled

I: 2020-05-17 14:58:01.581     Mode Hang: 3s

I: 2020-05-17 14:58:01.582 Info Parameters

I: 2020-05-17 14:58:01.582     Callsign: N6DOZ

I: 2020-05-17 14:58:01.582     RX Frequency: 432100000Hz

I: 2020-05-17 14:58:01.582     TX Frequency: 432100100Hz

I: 2020-05-17 14:58:01.582     Power: 1W

I: 2020-05-17 14:58:01.583     Latitude: 37.654202deg N

I: 2020-05-17 14:58:01.583     Longitude: -122.429802deg E

I: 2020-05-17 14:58:01.583     Height: 16m

I: 2020-05-17 14:58:01.583     Location: "South San Francisco, CA USA"

I: 2020-05-17 14:58:01.583     Description: "FCS_MMDVM_BRIDGE"

I: 2020-05-17 14:58:01.583     URL: "http://www.kapihan.net"

M: 2020-05-17 14:58:01.583 DMR, Opening DMR Network

I: 2020-05-17 14:58:01.583 RSSI

I: 2020-05-17 14:58:01.583     Mapping File: RSSI.dat

W: 2020-05-17 14:58:01.583 Cannot open the RSSI data file - RSSI.dat

I: 2020-05-17 14:58:01.583 DMR Id Lookups

I: 2020-05-17 14:58:01.583     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-05-17 14:58:01.583     Reload: 24 hours

I: 2020-05-17 14:58:01.754 Loaded 162402 Ids to the DMR callsign lookup table

I: 2020-05-17 14:58:01.755 DMR RF Parameters

I: 2020-05-17 14:58:01.755     Id: 315069220

I: 2020-05-17 14:58:01.755     Color Code: 1

I: 2020-05-17 14:58:01.755     Self Only: no

I: 2020-05-17 14:58:01.755     Embedded LC Only: yes

I: 2020-05-17 14:58:01.755     Dump Talker Alias Data: no

I: 2020-05-17 14:58:01.755     Prefixes: 0

I: 2020-05-17 14:58:01.755     Call Hang: 3s

I: 2020-05-17 14:58:01.755     TX Hang: 3s

I: 2020-05-17 14:58:01.755     Mode Hang: 10s

M: 2020-05-17 14:58:01.755 DMR, Opening INI file: DVSwitch.ini

I: 2020-05-17 14:58:01.756 Started the DMR Id lookup reload thread

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] TXPort -> 34100

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] RXPort -> 34103

M: 2020-05-17 14:58:01.756 DMR, Setting [DMR] Slot -> 1

M: 2020-05-17 14:58:01.756 DMR, Transmitting on 127.0.0.1:34100, and listening on port 34103.  Result = 1

M: 2020-05-17 14:58:01.756 MMDVM_Bridge-20200309_V1.5.1 is running

D: 2020-05-17 14:58:11.801 DMR, Sending authorisation

D: 2020-05-17 14:58:11.847 DMR, Sending configuration

M: 2020-05-17 14:58:11.898 DMR, Logged into the master successfully

M: 2020-05-17 15:07:38.473 DMR Slot 2, received network late entry from N6DOZ to TG 311620

M: 2020-05-17 15:07:39.069 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '

M: 2020-05-17 15:07:39.791 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'

M: 2020-05-17 15:07:39.911 DMR Slot 2, received network end of voice transmission, 1.6 seconds, 0% packet loss, BER: 0.0%


YSFGateway

M: 2020-05-17 15:04:46.058 Opening YSF network connection

I: 2020-05-17 15:04:46.058 Opening UDP port on 62046

M: 2020-05-17 15:04:46.058 Resolving FCS00x addresses

M: 2020-05-17 15:04:46.060 Opening FCS network connection

I: 2020-05-17 15:04:46.060 Opening UDP port on 42002

I: 2020-05-17 15:04:46.060 The ID of this repeater is 00000

I: 2020-05-17 15:04:46.061 Loaded 800 FCS room descriptions

I: 2020-05-17 15:04:46.061 Loaded 825 YSF reflectors

I: 2020-05-17 15:04:46.061 Loaded YSF parrot

M: 2020-05-17 15:04:46.064 Automatic (re-)connection to FCS00457

M: 2020-05-17 15:04:46.065 Starting YSFGateway-20200405

 

M: 2020-05-17 15:04:46.223 Linked to FCS004-57

 


Steve N4IRS
 
Edited

Are you telling me MMDVM_Bridge is segfaulting? if so, please post COMPLETE MMDVM_Bridge.ini
When does it segfault? At startup or when passing traffic?


Rudy N6DOZ
 

MMDVM_Bridge 1.4.1.

Updated to MMDVM_Bridge 1.5.1 and got the same result.

uname -a

 

Linux vultr.guest 4.15.0-66-generic #75-Ubuntu SMP Tue Oct 1 05:24:09 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

cat /etc/debian_version

buster/sid


Steve N4IRS
 

What program is core dumping?

On 5/17/20 10:53 AM, Rudy N6DOZ wrote:

Thanks Steve.

I've been playing with the setup Eric K6KWB suggested and I get a "Segmentation fault (core dumped)" error.

Stand by for snips...



Rudy N6DOZ
 

Thanks Steve.

I've been playing with the setup Eric K6KWB suggested and I get a "Segmentation fault (core dumped)" error.

Stand by for snips...


Steve N4IRS
 

To connect to FCS, you will need to use YSFGateway. (today)

Steve N4IRS

On 5/16/20 4:42 PM, Rudy N6DOZ wrote:

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge.

Is it possible to emulate the same idea, but to an FCS reflector?

BM_TG <-> MB <-> FCS00457

Here's my attempt at this (just realized, there's no entry for me to put the reflector number):

MMDVM.ini

[General]
Callsign=N6DOZ
Id=315069250
Timeout=180
Duplex=0

 

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

 

[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

 

[System Fusion Network] ; FCS
Enable=1
LocalAddress=0
LocalPort=3201
GatewayAddress=fcs004.xreflector.net
GatewayPort=62500
Debug=0


DVSwitch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             
TXPort = 33100                  
RXPort = 33103                  
Slot = 2                        
; Slot = 1                      
 
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1            
TXPort = 33103                 
RXPort = 33100                 
FallbackID = 3135404           
ExportTG = 311620               
Slot = 2                       


Q. Is this even possible? Or is there a different method to this? 

Thanks in advance, 7-3 N6DOZ.
 


Rudy N6DOZ
 
Edited

When I transmit to the TG, it looks like  MB sees it, but no audio on the other end.

I: 2020-05-16 20:36:39.678 MMDVM_Bridge:
I: 2020-05-16 20:36:39.679 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-16 20:36:39.679 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-05-16 20:36:39.679 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-05-16 20:36:39.679 This software is for use on amateur radio networks only,
I: 2020-05-16 20:36:39.679 it is to be used for educational purposes only. Its use on
I: 2020-05-16 20:36:39.679 commercial networks is strictly prohibited.
I: 2020-05-16 20:36:39.679 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-05-16 20:36:39.679 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-05-16 20:36:39.679 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)
I: 2020-05-16 20:36:39.679 General Parameters
I: 2020-05-16 20:36:39.679     Callsign: N6DOZ
I: 2020-05-16 20:36:39.679     Id: 315069250
I: 2020-05-16 20:36:39.679     Duplex: no
I: 2020-05-16 20:36:39.679     Timeout: 180s
I: 2020-05-16 20:36:39.679     DMR: enabled
I: 2020-05-16 20:36:39.680     YSF: enabled
M: 2020-05-16 20:36:39.681 Opening the MMDVM
I: 2020-05-16 20:36:39.681 Display Parameters
I: 2020-05-16 20:36:39.681     Type: 
I: 2020-05-16 20:36:39.681 DMR Network Parameters
I: 2020-05-16 20:36:39.681     Address: 3103.repeater.net
I: 2020-05-16 20:36:39.681     Port: 62031
I: 2020-05-16 20:36:39.681     Local: 62032
I: 2020-05-16 20:36:39.681     Jitter: 360ms
I: 2020-05-16 20:36:39.681     Slot 1: disabled
I: 2020-05-16 20:36:39.682     Slot 2: enabled
I: 2020-05-16 20:36:39.683 Info Parameters
I: 2020-05-16 20:36:39.683     Callsign: N6DOZ
M: 2020-05-16 20:36:39.684 DMR, Opening DMR Network
I: 2020-05-16 20:36:39.684 System Fusion Network Parameters
I: 2020-05-16 20:36:39.684     Local Address: 0
I: 2020-05-16 20:36:39.684     Local Port: 3201
I: 2020-05-16 20:36:39.684     Gateway Address: fcs004.xreflector.net
I: 2020-05-16 20:36:39.684     Gateway Port: 62500
I: 2020-05-16 20:36:39.684     Mode Hang: 3s
M: 2020-05-16 20:36:39.684 Opening YSF network connection
I: 2020-05-16 20:36:39.684 RSSI
I: 2020-05-16 20:36:39.684     Mapping File: RSSI.dat
W: 2020-05-16 20:36:39.685 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-16 20:36:39.685 DMR Id Lookups
I: 2020-05-16 20:36:39.685     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-16 20:36:39.685     Reload: 24 hours
I: 2020-05-16 20:36:39.847 Loaded 164578 Ids to the DMR callsign lookup table
I: 2020-05-16 20:36:39.847 DMR RF Parameters
I: 2020-05-16 20:36:39.847     Id: 315069250
I: 2020-05-16 20:36:39.847     Color Code: 1
I: 2020-05-16 20:36:39.847     Self Only: no
I: 2020-05-16 20:36:39.847     Embedded LC Only: yes
I: 2020-05-16 20:36:39.848     Dump Talker Alias Data: no
I: 2020-05-16 20:36:39.848     Prefixes: 0
I: 2020-05-16 20:36:39.848     Call Hang: 3s
I: 2020-05-16 20:36:39.848     TX Hang: 3s
I: 2020-05-16 20:36:39.848     Mode Hang: 10s
M: 2020-05-16 20:36:39.848 DMR, Opening INI file: DVSwitch.ini
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] TXPort -> 33100
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] RXPort -> 33103
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] Slot -> 2
M: 2020-05-16 20:36:39.848 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
I: 2020-05-16 20:36:39.848 YSF RF Parameters
I: 2020-05-16 20:36:39.848     Low Deviation: no
I: 2020-05-16 20:36:39.848     Remote Gateway: no
I: 2020-05-16 20:36:39.848     Self Only: no
I: 2020-05-16 20:36:39.848     DSQ: no
I: 2020-05-16 20:36:39.849     Mode Hang: 10s
M: 2020-05-16 20:36:39.849 YSF, Opening INI file: DVSwitch.ini
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] TXPort -> 33103
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] RXPort -> 33100
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] FallbackID -> 3135404
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] ExportTG -> 311620
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] Slot -> 2
M: 2020-05-16 20:36:39.849 YSF, Transmitting on 127.0.0.1:33103 and listening on port 33100.  Result = 1
M: 2020-05-16 20:36:39.849 MMDVM_Bridge-20191105_V1.4.1 is running
I: 2020-05-16 20:36:39.849 Started the DMR Id lookup reload thread
D: 2020-05-16 20:36:49.858 DMR, Sending authorisation
D: 2020-05-16 20:36:49.863 DMR, Sending configuration
M: 2020-05-16 20:36:49.868 DMR, Logged into the master successfully
M: 2020-05-16 20:37:35.663 DMR Slot 2, received network late entry from N6DOZ to TG 311620
M: 2020-05-16 20:37:35.663 YSF, TX state = ON
I: 2020-05-16 20:37:35.663 YSF, Begin TX: src=3135404 rpt=0 dst=311620 slot=2 cc=0 metadata=N6DOZ
I: 2020-05-16 20:37:35.724 YSF, Narrow transmit (72 bit)
M: 2020-05-16 20:37:36.264 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '
M: 2020-05-16 20:37:36.982 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'
M: 2020-05-16 20:37:38.182 DMR Slot 2, received network end of voice transmission, 2.6 seconds, 0% packet loss, BER: 0.0%
M: 2020-05-16 20:37:38.182 YSF, TX state = OFF


Rudy N6DOZ
 
Edited

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge.

Is it possible to emulate the same idea, but to an FCS reflector?

BM_TG <-> MB <-> FCS00457

Here's my attempt at this (just realized, there's no entry for me to put the reflector number):

MMDVM.ini

[General]
Callsign=N6DOZ
Id=315069250
Timeout=180
Duplex=0

 

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

 

[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

 

[System Fusion Network] ; FCS
Enable=1
LocalAddress=0
LocalPort=3201
GatewayAddress=fcs004.xreflector.net
GatewayPort=62500
Debug=0


DVSwitch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             
TXPort = 33100                  
RXPort = 33103                  
Slot = 2                        
; Slot = 1                      
 
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1            
TXPort = 33103                 
RXPort = 33100                 
FallbackID = 3135404           
ExportTG = 311620               
Slot = 2                       


Q. Is this even possible? Or is there a different method to this? 

Thanks in advance, 7-3 N6DOZ.

======

TL;DR

Got it working based with help from Eric K6KWB and Steve N4IRS.

This is what I ended up with:
 
BM <-> MB <-> YSFGateway <-> FCS Reflector

MMDVM_Bridge.ini
 
[General]
Callsign=N6DOZ
Id=315069220
Timeout=180
Duplex=0
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-DMX
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Password=passw0rd
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62045
GatewayAddress=127.0.0.1
GatewayPort=62046
Debug=0
 
 
 
DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                
Slot = 2                       
 
[YSF]
Address = 127.0.0.1              
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                        
 
 
YSFGateway.ini
 
[General]
Callsign=N6DOZ
#Suffix=RPT
# Suffix=ND
Id=3150692
RptAddress=127.0.0.1
RptPort=62045
LocalAddress=127.0.0.1
LocalPort=62046
Daemon=0
 
[Network]
Startup=FCS00457
InactivityTimeout=10
Revert=0
Debug=0
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42001