On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@...
(914)497-5502




<HBlink.log>

Did you update dmr-utils?

Sent from my iPhone

On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@...
(914)497-5502




<HBlink.log>

On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:

I do not have DMR-utils

On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
Did you update dmr-utils?

Sent from my iPhone

On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@...
(914)497-5502




<HBlink.log>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502

Dmr_utils is required to run those utilities.

Sent from my iPhone

On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:

I do not have DMR-utils

On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
Did you update dmr-utils?

Sent from my iPhone

On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:

So i have up dated the software , After run for sum time ,

I see data coming in to HB_link but not making it to my Open spot .

and link to C bridge is good ,

To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .

I have a attached the end of the log file .

--
Bob KC2CWT
kc2cwt@...
(914)497-5502




<HBlink.log>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502

Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502

Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502

I ran the install.sh is thair more i need to do

On 12/07/2017 12:01 PM, Steve N4IRS wrote:

Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:

Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502

-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502

I made a new dir called dmr_utils-master i copy the dir for Github change properties to 755 and ran the install.sh

Was this the right way to do this

On 12/07/2017 07:21 PM, Steve N4IRS wrote:

It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do

On 12/07/2017 12:01 PM, Steve N4IRS wrote:

Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:

Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502

-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502

-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502

Nothing to config in it ?

On 12/07/2017 07:28 PM, Steve N4IRS wrote:

Yes, that will be fine.

On 12/07/2017 07:27 PM, Bob kc2cwt wrote:

I made a new dir called dmr_utils-master i copy the dir for Github change properties to 755 and ran the install.sh

Was this the right way to do this

On 12/07/2017 07:21 PM, Steve N4IRS wrote:

It won't hurt to do a bunch of apt-gets on stuff you already have installed.

On 12/07/2017 07:20 PM, Bob kc2cwt wrote:

I ran the install.sh is thair more i need to do

On 12/07/2017 12:01 PM, Steve N4IRS wrote:

Sorry, I got tied up.
<https://github.com/n0mjs710/dmr_utils>

run the install.sh

On 12/7/2017 11:56 AM, Bob kc2cwt wrote:

Looking for a little help I can't find any documentation on how to get DMR utilities installed

KC2CWT
Bob Schneider
kc2cwt@...
(914)497-5502

-----Original Message-----
From: Bob kc2cwt <kc2cwt@...>
To: DVSwitch@groups.io
Sent: Wed, 06 Dec 2017 7:51 PM
Subject: Re: [DVSwitch] kill HB_LINK

Ok , it is working , Time for some more reading



On 12/06/2017 07:49 PM, Corey Dean N3FE wrote:
> Dmr_utils is required to run those utilities.
>
> Sent from my iPhone
>
>> On Dec 6, 2017, at 7:42 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>
>> I do not have DMR-utils
>>
>>> On 12/06/2017 07:41 PM, Corey Dean N3FE wrote:
>>> Did you update dmr-utils?
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2017, at 7:04 PM, Bob kc2cwt <kc2cwt@...> wrote:
>>>>
>>>> So i have up dated the software , After run for sum time ,
>>>>
>>>> I see data coming in to HB_link but not making it to my Open spot .
>>>>
>>>> and link to C bridge is good ,
>>>>
>>>> To make it work , I have to kill HB_link and restart it . then it will work some time as short as a hr or as long as 2 days .
>>>>
>>>> I have a attached the end of the log file .
>>>>
>>>> --
>>>> Bob KC2CWT
>>>> kc2cwt@...
>>>> (914)497-5502
>>>>
>>>>
>>>>
>>>>
>>>> <HBlink.log>
>> --
>> Bob KC2CWT
>> kc2cwt@...
>> (914)497-5502
>>
>>
>>
>>
>
>

--
Bob KC2CWT
kc2cwt@...
(914)497-5502

-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502

-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502

-- 
Bob KC2CWT
kc2cwt@...
(914)497-5502