Topics

#analog_bridge #analog_bridge


andrew delgado
 

i did stop the ambe server here is the logs. same error on port 31100 will close upon sending the marco ^DMR mode

I: 2020-06-04 03:23:37.362 Tune macro: *DMR will invoke "/opt/Analog_Bridge/dvswitch.sh mode DMR"
I: 2020-06-04 03:23:37.548 rxport=: 30000
M: 2020-06-04 03:23:37.549 TLV rx socket reopened for 127.0.0.1:30000
I: 2020-06-04 03:23:38.862 MESSAGE packet sent to USRP client: Setting mode to DMR
I: 2020-06-04 03:23:38.937 ambeMode = DMR, size = 72
M: 2020-06-04 03:23:38.937 Connecting to DV3000 hardware......
M: 2020-06-04 03:23:38.948 Begin DV3000 decode
I: 2020-06-04 03:23:39.009 txport=: 31103
I: 2020-06-04 03:23:39.102 rxport=: 31100
E: 2020-06-04 03:23:39.103 Can not bind port 31100, error code = 98 (Address already in use)
M: 2020-06-04 03:23:39.103 TLV rx socket reopened for 127.0.0.1:31100
I: 2020-06-04 03:23:40.345 Macro result was 0


andrew delgado
 

Yes Mike, Im running the stick at the same host using pi3,

my problem is when i issue the DMR mode @ Dvswitch mobile client the error pertaining to port 31100 will close. and will not receive audio from mobile phone ,and tx from mobile phone is okay.

I: 2020-06-04 03:14:03.590 ambeMode = DMR, size = 72
M: 2020-06-04 03:14:03.591 Connecting to DV3000 hardware......
E: 2020-06-04 03:14:03.591 Can not bind port 2460, error code = 98 (Address already in use)
M: 2020-06-04 03:14:03.625 Begin DV3000 decode
I: 2020-06-04 03:14:03.670 txport=: 31103
I: 2020-06-04 03:14:03.742 rxport=: 31100
E: 2020-06-04 03:14:03.743 Can not bind port 31100, error code = 98 (Address already in use)
M: 2020-06-04 03:14:03.743 TLV rx socket reopened for 127.0.0.1:31100
I: 2020-06-04 03:14:04.911 Macro result was 0


Mike Zingman - N4IRR
 

Andrew, 

By the error you are seeing I have to assume you are running AMBEServer on the same machine as Analog_Bridge is running on.  If this is so, you can just run the DV3000 (or other stick) directly.
If for some reason you need to run AMBEServer, you can ignore the message (it is fixed in a future release of AB)

Mike N4IRR


andrew delgado
 

 HI Ernie,

I only have one instance for analog and mmdvm bridge this is right after install and configuration from the pdf documentation posted here.

Regards,
Andrew


 

You may have another Analoge_Bridge running.
MMDVM_Bridge and Analoge_Bridge have usually been installed to start up when your device is restarted.
I get caught out myself. I like running them in terminal windows. Find it easier to fault find.
sudo systemctl stop analog_bridge
sudo systemctl stop mmdvm_bridge


andrew delgado
 
Edited

Hi All,

Can you help me with the error below? it seems that theres an error on port when clicking the marco<>Mode Select <> DMR on mobile phone
port 31100 will close.

I: 2020-06-03 04:51:38.416 MESSAGE packet sent to USRP client: Setting mode to DMR
I: 2020-06-03 04:51:38.489 ambeMode = DMR, size = 72
M: 2020-06-03 04:51:38.489 Connecting to DV3000 hardware......
E: 2020-06-03 04:51:38.489 Can not bind port 2460, error code = 98 (Address already in use)
M: 2020-06-03 04:51:38.533 Begin DV3000 decode
I: 2020-06-03 04:51:38.568 txport=: 31103
I: 2020-06-03 04:51:38.669 rxport=: 31100
E: 2020-06-03 04:51:38.670 Can not bind port 31100, error code = 98 (Address already in use)
M: 2020-06-03 04:51:38.670 TLV rx socket reopened for 127.0.0.1:31100
I: 2020-06-03 04:51:39.905 Macro result was 0

Thanks!
Andrew 73!