Setting up a YSF Reflector <---> XLX (DMR) Reflector


Steve N4IRS
 

On 6/13/20 8:34 AM, Adrianm0glj@... wrote:
On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_Bridge
Thanks Steve.

Where would I find this package?

Adrian M0GLJ


Adrianm0glj@...
 

On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_Bridge
Thanks Steve.

Where would I find this package?

Adrian M0GLJ


Steve N4IRS
 

We don't use YSF2DMR. If you want to bridge the 2 networks use MMDVM_Bridge.

Steve N4IRS

On 6/12/20 8:50 PM, Adrianm0glj@... wrote:
Hi All

I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the instructions on https://github.com/juribeparada/MMDVM_CM/blob/master/YSF2DMR/service/README.md to setup the unit file and I have the XLXHosts.txt file downloaded from http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster

However, I am getting and error when I start the unit file.

--->snip<---
root@vps-4a62c445:/usr/local/bin# sudo systemctl status ysf2dmr
● ysf2dmr.service - YSF2DMR Service
   Loaded: loaded (/lib/systemd/system/ysf2dmr.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2020-06-13 01:49:01 BST; 5s ago
  Process: 2374 ExecStop=/usr/local/sbin/ysf2dmr.service stop (code=exited, status=1/FAILURE)
  Process: 2362 ExecStart=/usr/local/sbin/ysf2dmr.service start (code=exited, status=0/SUCCESS)
 Main PID: 2362 (code=exited, status=0/SUCCESS)

Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354 General Parameters
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Remote Gateway: no
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Hang Time: 1000 ms
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.354 Opening YSF network connection
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.355 Trying to find non existent XLX reflector with an id of 5
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: E: 2020-06-13 00:49:01.355 Cannot open DMR Network
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: YSF2DMR started as PID
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2374]: YSF2DMR is not running
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Control process exited, code=exited status=1
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Failed with result 'exit-code'.
root@vps-4a62c445:/usr/local/bin#

 
--->snip<---

Could someone give me some tips on where to look for the obvious mistake that I have made the is not hitting me on the head please?

Thanks in Advance
Adrian M0GLJ


Adrianm0glj@...
 

Hi All

I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the instructions on https://github.com/juribeparada/MMDVM_CM/blob/master/YSF2DMR/service/README.md to setup the unit file and I have the XLXHosts.txt file downloaded from http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster

However, I am getting and error when I start the unit file.

--->snip<---
root@vps-4a62c445:/usr/local/bin# sudo systemctl status ysf2dmr
● ysf2dmr.service - YSF2DMR Service
   Loaded: loaded (/lib/systemd/system/ysf2dmr.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2020-06-13 01:49:01 BST; 5s ago
  Process: 2374 ExecStop=/usr/local/sbin/ysf2dmr.service stop (code=exited, status=1/FAILURE)
  Process: 2362 ExecStart=/usr/local/sbin/ysf2dmr.service start (code=exited, status=0/SUCCESS)
 Main PID: 2362 (code=exited, status=0/SUCCESS)

Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354 General Parameters
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Remote Gateway: no
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Hang Time: 1000 ms
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.354 Opening YSF network connection
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.355 Trying to find non existent XLX reflector with an id of 5
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: E: 2020-06-13 00:49:01.355 Cannot open DMR Network
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: YSF2DMR started as PID
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2374]: YSF2DMR is not running
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Control process exited, code=exited status=1
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Failed with result 'exit-code'.
root@vps-4a62c445:/usr/local/bin#

 
--->snip<---

Could someone give me some tips on where to look for the obvious mistake that I have made the is not hitting me on the head please?

Thanks in Advance
Adrian M0GLJ