main@DVSwitch.groups.io | Error, DVSwitch.ini file not found.. But it's right there?!

Home Messages Hashtags Subgroups Wiki

Topics

Date Date 1 - 20 of 42

Error, DVSwitch.ini file not found.. But it's right there?!

sigmazgfx@... #6925 Hey Guys/Gals, I'm having a strange error.. I have DVSwitch up and running on an ASL deployment and I had configured ASL NODE 1999 for use as a bridge to DMR. It works just dandy, So I figured it was time to move forward and see about lighting up DStar and maybe another mode.. but for now DStar was the one I was going to start with. I when I manually invoke a ./dvswitch.sh mode DSTAR the script comes back with the error that the DVSwitch.ini cant be found? I checked the script and the DVSWITCH_INI variable points to /opt/MMDVM_Bridge/DVSwitch.ini and after checking several if not tens of times, YES the file lives in there along with MMDVM_Bridge and MMDVM_Bridge.ini What gives? what did I mess up? I think that in the dvswitch.sh file, I can see that it it's supposed to parse the file and if it cant find the values it assumes its because the file isn't available? The file permissions are 755 but I have also tried at 777 and it still fails. Oh , and YES the [DSTAR] schema is present in the DVSwitch.ini as well as it's associated TXPort and RXPort values this process is looking for. And the [D-Star] Enable=1 is set in the MMDVM_Bridge.ini.. Thanks, any insight is appreciated. -jon W2JON
More All Messages By This Member
Mike KB8JNM #6926 are you root ? check ownership toggle quoted messageShow quoted text On 7/9/2020 9:12 PM, w2jon@... wrote: Hey Guys/Gals, I'm having a strange error.. I have DVSwitch up and running on an ASL deployment and I had configured ASL NODE 1999 for use as a bridge to DMR. It works just dandy, So I figured it was time to move forward and see about lighting up DStar and maybe another mode.. but for now DStar was the one I was going to start with. I when I manually invoke a ./dvswitch.sh mode DSTAR the script comes back with the error that the DVSwitch.ini cant be found? I checked the script and the DVSWITCH_INI variable points to /opt/MMDVM_Bridge/DVSwitch.ini and after checking several if not tens of times, YES the file lives in there along with MMDVM_Bridge and MMDVM_Bridge.ini What gives? what did I mess up? I think that in the dvswitch.sh file, I can see that it it's supposed to parse the file and if it cant find the values it assumes its because the file isn't available? The file permissions are 755 but I have also tried at 777 and it still fails. Oh , and YES the [DSTAR] schema is present in the DVSwitch.ini as well as it's associated TXPort and RXPort values this process is looking for. And the [D-Star] Enable=1 is set in the MMDVM_Bridge.ini.. Thanks, any insight is appreciated. -jon W2JON
More All Messages By This Member
sigmazgfx@... #6927 Edited Yep I'm root and the files are owned by root as well.\ all processes except for some started by systemd+ (none related to this) are running under root
More All Messages By This Member
Mike KB8JNM #6928 typo ? perhaps try to back out of the current director of it and specify the path to it ./dir/sub/xxx.sh after that I am out of guesses. toggle quoted messageShow quoted text On 7/9/2020 9:17 PM, w2jon@... wrote: [Edited Message Follows] Yep I'm root and the files are owned by root as well.\ all processes except for some started by systemd+ (none related to this) are running under root
More All Messages By This Member
sigmazgfx@... #6929 Edited Crazy... Still no worky.. ( ./Analog_Bridge/dvswitch.sh mode DSTAR ) parseIniFile "$DVSWITCH_INI" "$_MODE" "TXPort" ++ parseIniFile /opt/MMDVM_Bridge/DVSwitch.ini DSTAR TXPort ++ python - + _MBTX= parseIniFile "$DVSWITCH_INI" "$_MODE" "RXPort" ++ parseIniFile /opt/MMDVM_Bridge/DVSwitch.ini DSTAR RXPort ++ python - + _MBRX= + '[' '!' -z ']' + echo 'Error, DVSwitch.ini file not found' Error, DVSwitch.ini file not found + _ERRORCODE=-1 exit $_ERRORCODE + exit -1
More All Messages By This Member
Mike KB8JNM #6930 Are you sure you did not mean DVSwitch.ini 'not found' ? If so set path and check permissions and ownership of the .ini file toggle quoted messageShow quoted text On 7/9/2020 9:31 PM, w2jon@... wrote: Crazy... Still no worky.. parseIniFile "$DVSWITCH_INI" "$_MODE" "TXPort" ++ parseIniFile ./opt/MMDVM_Bridge/DVSwitch.ini DSTAR TXPort ++ python - + _MBTX= parseIniFile "$DVSWITCH_INI" "$_MODE" "RXPort" ++ parseIniFile ./opt/MMDVM_Bridge/DVSwitch.ini DSTAR RXPort ++ python - + _MBRX= + '[' '!' -z ']' + echo 'Error, DVSwitch.ini file not found' Error, DVSwitch.ini file not found + _ERRORCODE=-1 exit $_ERRORCODE
More All Messages By This Member
sigmazgfx@... #6931 Yes Mike, that's what I meant.. wait a min....I thought I put..... Yeah, That's the subject of this thread right?
More All Messages By This Member
Mike KB8JNM #6932 isn't there a place to set the path to the .ini file ? I'm not using the newer software so I don't know. toggle quoted messageShow quoted text On 7/9/2020 9:37 PM, w2jon@... wrote: Yes Mike, that's what I meant.. wait a min....I thought I put..... Yeah, That's the subject of this thread right?
More All Messages By This Member
sigmazgfx@... #6933 The path in the .sh script is set to DVSWITCH_INI=${DVSWITCH_INI:-"/opt/MMDVM_Bridge/DVSwitch.ini"} The file permissions are 755 and the owner is root.. but everything is root on this pi.
More All Messages By This Member
Mike KB8JNM #6934 What about group ownership . I am no help. sorry toggle quoted messageShow quoted text On 7/9/2020 9:40 PM, w2jon@... wrote: The path in the .sh script is set to DVSWITCH_INI=${DVSWITCH_INI:-"/opt/MMDVM_Bridge/DVSwitch.ini"} The file permissions are 755 and the owner is root.. but everything is root on this pi.
More All Messages By This Member
sigmazgfx@... #6935 HAHA.. no its good.. You're going through it with me. I appreciate it Every thing is root including the group owners
More All Messages By This Member
sigmazgfx@... #6936 Edited Th one thing that IS of note is that the /opt/MMDVM_Bridge folder is a symbolic link to /usr/local/dvswitch/opt/MMDVM_Bridge as are all of the other folders under /opt Also I can manually CAT the /opt/MMDVM_Bridge/DVSwitch.ini file from the Analog_Bridge folder from where the DVSwitch.sh scriptis run..
More All Messages By This Member
Steve N4IRS #6937 What does /opt/MMDVM_Bridge/dvswitch.sh mode return? toggle quoted messageShow quoted text On 7/9/20 9:12 PM, w2jon@... wrote: Hey Guys/Gals, I'm having a strange error.. I have DVSwitch up and running on an ASL deployment and I had configured ASL NODE 1999 for use as a bridge to DMR. It works just dandy, So I figured it was time to move forward and see about lighting up DStar and maybe another mode.. but for now DStar was the one I was going to start with. I when I manually invoke a ./dvswitch.sh mode DSTAR the script comes back with the error that the DVSwitch.ini cant be found? I checked the script and the DVSWITCH_INI variable points to /opt/MMDVM_Bridge/DVSwitch.ini and after checking several if not tens of times, YES the file lives in there along with MMDVM_Bridge and MMDVM_Bridge.ini What gives? what did I mess up? I think that in the dvswitch.sh file, I can see that it it's supposed to parse the file and if it cant find the values it assumes its because the file isn't available? The file permissions are 755 but I have also tried at 777 and it still fails. Oh , and YES the [DSTAR] schema is present in the DVSwitch.ini as well as it's associated TXPort and RXPort values this process is looking for. And the [D-Star] Enable=1 is set in the MMDVM_Bridge.ini.. Thanks, any insight is appreciated. -jon W2JON
More All Messages By This Member
Steve N4IRS #6938 huh? toggle quoted messageShow quoted text On 7/9/20 9:50 PM, w2jon@... wrote: Th one thing that IS of note is that the /opt/MMDVM_Bridge folder is a symbolic link to /usr/local/dvswitch/opt/MMDVM_Bridge as are all of the other folders under /opt
More All Messages By This Member
sigmazgfx@... #6939 DMR
More All Messages By This Member
Steve N4IRS #6940 This should not be. toggle quoted messageShow quoted text On 7/9/20 9:50 PM, w2jon@... wrote: Th one thing that IS of note is that the /opt/MMDVM_Bridge folder is a symbolic link to /usr/local/dvswitch/opt/MMDVM_Bridge as are all of the other folders under /opt
More All Messages By This Member
sigmazgfx@... #6941 sorry steve.. here is the last bit of the debug output getTLVPort ++ getTLVPort ++ getABInfoValue tlv rx_port getABInfoFileName +++ getABInfoFileName +++ '[' -z '' ']' ls -t /tmp/ABInfo_.json 2>/dev/null \| head -1 ++++ ls -t /tmp/ABInfo_34001.json ++++ head -1 +++ declare _json_file=/tmp/ABInfo_34001.json +++ echo /tmp/ABInfo_34001.json ++ declare _json_file=/tmp/ABInfo_34001.json ++ python - + TLV_PORT=30000 + '[' -z 30000 ']' + case $1 in + setMode + '[' 0 -eq 0 ']' getABInfoValue tlv ambe_mode ++ getABInfoValue tlv ambe_mode getABInfoFileName +++ getABInfoFileName +++ '[' -z '' ']' ls -t /tmp/ABInfo_.json 2>/dev/null \| head -1 ++++ head -1 ++++ ls -t /tmp/ABInfo_34001.json +++ declare _json_file=/tmp/ABInfo_34001.json +++ echo /tmp/ABInfo_34001.json ++ declare _json_file=/tmp/ABInfo_34001.json ++ python - + echo DMR DMR exit $_ERRORCODE + exit 0
More All Messages By This Member
Steve N4IRS #6942 Thell me about the symlink toggle quoted messageShow quoted text On 7/9/20 9:54 PM, w2jon@... wrote: sorry steve.. here is the last bit of the debug output getTLVPort ++ getTLVPort ++ getABInfoValue tlv rx_port getABInfoFileName +++ getABInfoFileName +++ '[' -z '' ']' ls -t /tmp/ABInfo_.json 2>/dev/null \| head -1 ++++ ls -t /tmp/ABInfo_34001.json ++++ head -1 +++ declare _json_file=/tmp/ABInfo_34001.json +++ echo /tmp/ABInfo_34001.json ++ declare _json_file=/tmp/ABInfo_34001.json ++ python - + TLV_PORT=30000 + '[' -z 30000 ']' + case $1 in + setMode + '[' 0 -eq 0 ']' getABInfoValue tlv ambe_mode ++ getABInfoValue tlv ambe_mode getABInfoFileName +++ getABInfoFileName +++ '[' -z '' ']' ls -t /tmp/ABInfo_.json 2>/dev/null \| head -1 ++++ head -1 ++++ ls -t /tmp/ABInfo_34001.json +++ declare _json_file=/tmp/ABInfo_34001.json +++ echo /tmp/ABInfo_34001.json ++ declare _json_file=/tmp/ABInfo_34001.json ++ python - + echo DMR DMR exit $_ERRORCODE + exit 0
More All Messages By This Member
Steve N4IRS #6943 There may be a symlink from /opt/MMDVM_Bridge/dvswitch.sh to /opt/Analog_Bridge/dvswitch.sh But that's it. toggle quoted messageShow quoted text On 7/9/20 9:50 PM, w2jon@... wrote: [Edited Message Follows] Th one thing that IS of note is that the /opt/MMDVM_Bridge folder is a symbolic link to /usr/local/dvswitch/opt/MMDVM_Bridge as are all of the other folders under /opt Also I can manually CAT the /opt/MMDVM_Bridge/DVSwitch.ini file from the Analog_Bridge folder from where the DVSwitch.sh scriptis run..
More All Messages By This Member
sigmazgfx@... #6944 This was put onto an ARCH 4.14.97 OS .Why Arch? it was a Crompton ASL payload and I wanted to enhance it with DVSwitch. It's been up running happily for some time now so I cant remember all that much about the build. All of the /opt Symbolic links are all pointing back to the respective sources but they are under the /usr/local/dvswitch-2019-3-16/opt/... I know it's not a standard deployment and I shouldn't expect any support but the question remains, Why does it not see the file when it is actually there. The script is just looking for a file at a location right? Even if I define the long path it still complanes.. Mind you I am no Linux guru.. I only know enough to cobble things together to get them to work. Clearly my last cobble has some flaws in it. But can we get around this? I'll take the lumps.. That's how we learn...other than my overall build, where did I go wrong?
More All Messages By This Member

1 - 20 of 42

Previous Topic Next Topic

Home Messages Hashtags Subgroups Wiki About Features Pricing Updates Terms Help Twitter