ircDDBGateway log error


Derek William Haden <facebook@...>
 

Could you offer any insight into this

2020-09-03 16:03:53: Error returned from sendto (port: 20010), err: 22
2020-09-03 16:06:08: Cannot connect the TCP client socket, err=110


 


Steve N4IRS
 

What log is this?


On 9/3/2020 12:49 PM, Derek William Haden wrote:
Could you offer any insight into this

2020-09-03 16:03:53: Error returned from sendto (port: 20010), err: 22
2020-09-03 16:06:08: Cannot connect the TCP client socket, err=110


 


Derek William Haden <facebook@...>
 

This is the error that I see in the 

ircDDBGateway log

I was wondering what the problem could be?


Steve N4IRS
 

Is D-Star working? port: 20010 is MB -> IRCDDBGateway.
 

On 9/4/2020 10:43 AM, Derek William Haden wrote:
This is the error that I see in the 

ircDDBGateway log

I was wondering what the problem could be?



Derek William Haden <facebook@...>
 

Yes


Steve N4IRS
 

Then don't worry about it for now.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Derek William Haden <facebook@...>
Sent: Saturday, September 5, 2020 5:28:35 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] ircDDBGateway log error
 
Yes


F4HWB
 

Hello

I have same problem :

Debug: DStarRX: found frame sync in None

 

Repeater server with an IPr :

  • raspberry Pi 4 
  • STM32-DVM pihat Modem with firmware updated
  • MMDVMHost
  • Local IPr:62022
  • Local IPr:20011

 

Gateway server with an IPg :

  • DMRGateway  IPg:62022
  • IrcDDBGateway IPg:20010

 

In MMDVMHost Log i’have this message :

[…]Debug: DStarRX: found frame sync in None

 

On MMDVMHost the tcpdump :

IP IPr.20011 > IPg.20010: UDP, length 26

The Repeater server send a good IP and port

 

In Ircddbgateway server log :

[..]Error returned from sendto (port: 20010), err: 22

 

On ircddbgateway server the tcpdump :

IP IPr.isdnlog > IPg.20010: UDP, length 26

 

The gateway receave ‘.isdnlog’ port and not 20011.

 The port is correct when i use tcpdump for DMRGateway

Why ? Sole body have the same problem ?

Thank you