Date
1 - 2 of 2
2 ysf2ysf mmdvm_bridge issue with dmr2ysf
hi All. im running 2 mbridge to link 2 different ysf reflector.working with fusion working good dn and vw without issue, i try with my dmr with openspot.. openspot dmr to ysf. it working only in 1 side. the mb1 working in my own refl is ok but accross the mb1 to mb2 the mb2 crash and restart.I try many thing tg change for tg 9 dmr id nothing change. i seen in my log the error message and i can see from mb1 dmr id 3022260 mb2 show 302226 so they miss something.
hers the log issue and i try to connect from dmr2ysf from ysfref1 mb2 crash i connect to ysfref2 mb1 crash so its the same issue on both side . This software is for use on amateur radio networks only, I: 2020-10-28 01:56:47.010 it is to be used for educational purposes only. Its use on I: 2020-10-28 01:56:47.010 commercial networks is strictly prohibited. I: 2020-10-28 01:56:47.010 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others M: 2020-10-28 01:56:47.010 MMDVM_Bridge-20200727_V1.5.9 is starting M: 2020-10-28 01:56:47.010 Built 16:22:31 Oct 23 2020 (GitID #0ea07ac) I: 2020-10-28 01:56:47.010 General Parameters I: 2020-10-28 01:56:47.010 Callsign: VA2TB I: 2020-10-28 01:56:47.010 Id: 302252 I: 2020-10-28 01:56:47.010 Duplex: no I: 2020-10-28 01:56:47.010 Timeout: 180s I: 2020-10-28 01:56:47.010 D-Star: disabled I: 2020-10-28 01:56:47.010 DMR: disabled I: 2020-10-28 01:56:47.010 YSF: enabled I: 2020-10-28 01:56:47.010 P25: disabled I: 2020-10-28 01:56:47.010 NXDN: disabled I: 2020-10-28 01:56:47.010 Modem Parameters I: 2020-10-28 01:56:47.010 Port: /dev/null I: 2020-10-28 01:56:47.010 RX Invert: no I: 2020-10-28 01:56:47.010 TX Invert: no I: 2020-10-28 01:56:47.010 PTT Invert: no I: 2020-10-28 01:56:47.010 TX Delay: 100ms I: 2020-10-28 01:56:47.010 RX Offset: 0Hz I: 2020-10-28 01:56:47.010 TX Offset: 0Hz I: 2020-10-28 01:56:47.010 RX DC Offset: 0 I: 2020-10-28 01:56:47.010 TX DC Offset: 0 I: 2020-10-28 01:56:47.010 RF Level: 100.0% I: 2020-10-28 01:56:47.010 DMR Delay: 0 (0.0ms) I: 2020-10-28 01:56:47.010 RX Level: 50.0% I: 2020-10-28 01:56:47.010 CW Id TX Level: 50.0% I: 2020-10-28 01:56:47.010 D-Star TX Level: 50.0% I: 2020-10-28 01:56:47.010 DMR TX Level: 50.0% I: 2020-10-28 01:56:47.010 YSF TX Level: 50.0% I: 2020-10-28 01:56:47.010 P25 TX Level: 50.0% I: 2020-10-28 01:56:47.010 NXDN TX Level: 50.0% I: 2020-10-28 01:56:47.010 RX Frequency: 0Hz (0Hz) I: 2020-10-28 01:56:47.010 TX Frequency: 0Hz (0Hz) M: 2020-10-28 01:56:47.010 Opening the MMDVM I: 2020-10-28 01:56:47.010 Display Parameters I: 2020-10-28 01:56:47.010 Type: I: 2020-10-28 01:56:47.010 System Fusion Network Parameters I: 2020-10-28 01:56:47.010 Local Address: 0 I: 2020-10-28 01:56:47.010 Local Port: 42200 I: 2020-10-28 01:56:47.010 Gateway Address: 151.80.143.185 I: 2020-10-28 01:56:47.010 Gateway Port: 42002 I: 2020-10-28 01:56:47.010 Mode Hang: 3s M: 2020-10-28 01:56:47.010 Opening YSF network connection I: 2020-10-28 01:56:47.014 RSSI I: 2020-10-28 01:56:47.014 Mapping File: /dev/null I: 2020-10-28 01:56:47.014 Loaded 0 RSSI data mapping points from /dev/null I: 2020-10-28 01:56:47.014 DMR Id Lookups I: 2020-10-28 01:56:47.014 File: /opt/DMRIds.dat I: 2020-10-28 01:56:47.014 Reload: 24 hours I: 2020-10-28 01:56:47.142 Loaded 89800 Ids to the DMR callsign lookup table I: 2020-10-28 01:56:47.145 YSF RF Parameters I: 2020-10-28 01:56:47.145 Low Deviation: no I: 2020-10-28 01:56:47.145 Remote Gateway: no I: 2020-10-28 01:56:47.145 Self Only: no I: 2020-10-28 01:56:47.145 DSQ: no I: 2020-10-28 01:56:47.145 Mode Hang: 10s M: 2020-10-28 01:56:47.145 YSF, Opening INI file: DVSwitch.ini M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] address -> 127.0.0.1 M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] txPort -> 42500 M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] rxPort -> 43500 M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] txWidePort -> 42500 M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] fallbackID -> 1234567 M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] exportTG -> 9 M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] slot -> 2 M: 2020-10-28 01:56:47.145 YSF, Setting [YSF] RemotePort -> 6073 M: 2020-10-28 01:56:47.145 YSF, Transmitting on 127.0.0.1:42500, and listening on port 43500. Result = 1 M: 2020-10-28 01:56:47.145 MMDVM_Bridge-20200727_V1.5.9 is running I: 2020-10-28 01:56:47.145 Started the DMR Id lookup reload thread M: 2020-10-28 01:56:58.969 YSF, TX state = ON I: 2020-10-28 01:56:58.969 YSF, Begin TX: src=1234567 rpt=0 dst=9 slot=2 cc=0 metadata=302226 M: 2020-10-28 01:56:58.969 YSF, No call or id found, using ini value: VA2TB HH& I: 2020-10-28 01:56:59.326 YSF, Narrow transmit (72 bit) I: 2020-10-28 01:57:02.865 MMDVM_Bridge: I: 2020-10-28 01:57:02.865 Portions Copyright (C) 2018, 2019, 2020 DVSwitch, INAD. I: 2020-10-28 01:57:02.865 Hacks by Mike N4IRR and Steve N4IRS I: 2020-10-28 01:57:02.865 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
|
|
To troubleshoot this, you will need to run MB in the foreground. You
will capture the live data when the crash happens.
toggle quoted messageShow quoted text
Steve N4IRS
On 10/27/20 10:19 PM, Sylvain ve2tbu
wrote:
hi All. im running 2 mbridge to link 2 different ysf reflector.working with fusion working good dn and vw without issue, i try with my dmr with openspot.. openspot dmr to ysf. it working only in 1 side. the mb1 working in my own refl is ok but accross the mb1 to mb2 the mb2 crash and restart.I try many thing tg change for tg 9 dmr id nothing change. i seen in my log the error message and i can see from mb1 dmr id 3022260 mb2 show 302226 so they miss something.
|
|