Date
1 - 20 of 43
#mmdvm_bridge #mmdvm_bridge
|
im running 2 mmdvmbridge. 1 link my own ysfreflector. second one link another ysf reflector. the link between ysf to ysf vw or narrow work perfectly, if i connect to my own ysf reflector from dmr2ysf hotspot the mb1 show everything ok. the second one mb2 missing last dmr id digit and close and restart.if i connect my dmr2ysf to ysfreflector 2 the mb2 work ok but the same issue in mb1.ysfreflector1.lost last dmr id digit and close and restart. using mbribdge in amd64. updated the last binary check all port all config but i cannot find anything wrong.When they crash i reveive a weird message from the last line came from dmr2ysf .
I: 2020-10-29 01:39:42.281 YSF, Begin TX: src=1234567 rpt=0 dst=1234 slot=2 cc=0 metadata=302226 M: 2020-10-29 01:39:42.281 YSF, No call or id found, using ini value: VA2TB GÖè I: 2020-10-29 01:39:42.586 YSF, Narrow transmit (72 bit) I: 2020-10-29 01:39:46.111 MMDVM_Bridge: I: 2020-10-29 01:39:46.111 Portions Copyright (C) 2018, 2019, 2020 DVSwitch, INAD. I: 2020-10-29 01:39:46.111 Hacks by Mike N4IRR and Steve N4IRS I: 2020-10-29 01:39:46.111 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- I: 2020-10-29 01:39:46.111 This software is for use on amateur radio networks only, I: 2020-10-29 01:39:46.111 it is to be used for educational purposes only. Its use on I: 2020-10-29 01:39:46.111 commercial networks is strictly prohibited. I: 2020-10-29 01:39:46.111 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others M: 2020-10-29 01:39:46.111 MMDVM_Bridge-20200727_V1.5.9 is starting M: 2020-10-29 01:39:46.111 Built 16:22:31 Oct 23 2020 (GitID #0ea07ac) I: 2020-10-29 01:39:46.111 General Parameters I: 2020-10-29 01:39:46.111 Callsign: VA2TB I: 2020-10-29 01:39:46.111 Id: 302252802 I: 2020-10-29 01:39:46.111 Duplex: no I: 2020-10-29 01:39:46.111 Timeout: 180s I: 2020-10-29 01:39:46.111 D-Star: disabled I: 2020-10-29 01:39:46.111 DMR: disabled I: 2020-10-29 01:39:46.111 YSF: enabled I: 2020-10-29 01:39:46.111 P25: disabled I: 2020-10-29 01:39:46.111 NXDN: disabled I: 2020-10-29 01:39:46.111 Modem Parameters I: 2020-10-29 01:39:46.112 Port: /dev/null I: 2020-10-29 01:39:46.112 RX Invert: no I: 2020-10-29 01:39:46.112 TX Invert: no I: 2020-10-29 01:39:46.112 PTT Invert: no I: 2020-10-29 01:39:46.112 TX Delay: 100ms I: 2020-10-29 01:39:46.112 RX Offset: 0Hz I: 2020-10-29 01:39:46.112 TX Offset: 0Hz I: 2020-10-29 01:39:46.112 RX DC Offset: 0 I: 2020-10-29 01:39:46.112 TX DC Offset: 0 I: 2020-10-29 01:39:46.112 RF Level: 100.0% I: 2020-10-29 01:39:46.112 DMR Delay: 0 (0.0ms) I: 2020-10-29 01:39:46.112 RX Level: 50.0% I: 2020-10-29 01:39:46.112 CW Id TX Level: 50.0% I: 2020-10-29 01:39:46.112 D-Star TX Level: 50.0% I: 2020-10-29 01:39:46.112 DMR TX Level: 50.0% I: 2020-10-29 01:39:46.112 YSF TX Level: 50.0% I: 2020-10-29 01:39:46.112 P25 TX Level: 50.0% I: 2020-10-29 01:39:46.112 NXDN TX Level: 50.0% I: 2020-10-29 01:39:46.112 RX Frequency: 0Hz (0Hz) I: 2020-10-29 01:39:46.112 TX Frequency: 0Hz (0Hz) M: 2020-10-29 01:39:46.112 Opening the MMDVM I: 2020-10-29 01:39:46.112 Display Parameters I: 2020-10-29 01:39:46.112 Type: I: 2020-10-29 01:39:46.112 System Fusion Network Parameters I: 2020-10-29 01:39:46.112 Local Address: 0 I: 2020-10-29 01:39:46.112 Local Port: 42200 I: 2020-10-29 01:39:46.112 Gateway Address: 151.80.143.185 I: 2020-10-29 01:39:46.112 Gateway Port: 42002 I: 2020-10-29 01:39:46.112 Mode Hang: 3s M: 2020-10-29 01:39:46.112 Opening YSF network connection I: 2020-10-29 01:39:46.114 RSSI I: 2020-10-29 01:39:46.114 Mapping File: /dev/null I: 2020-10-29 01:39:46.114 Loaded 0 RSSI data mapping points from /dev/null I: 2020-10-29 01:39:46.114 DMR Id Lookups I: 2020-10-29 01:39:46.114 File: /opt/DMRIds.dat I: 2020-10-29 01:39:46.114 Reload: 24 hours I: 2020-10-29 01:39:46.204 Loaded 89800 Ids to the DMR callsign lookup table I: 2020-10-29 01:39:46.206 YSF RF Parameters I: 2020-10-29 01:39:46.206 Low Deviation: no I: 2020-10-29 01:39:46.206 Remote Gateway: no I: 2020-10-29 01:39:46.206 Self Only: no I: 2020-10-29 01:39:46.206 DSQ: no I: 2020-10-29 01:39:46.206 Mode Hang: 10s M: 2020-10-29 01:39:46.206 YSF, Opening INI file: DVSwitch.ini M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] address -> 127.0.0.1 M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] txPort -> 42500 M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] rxPort -> 43500 M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] txWidePort -> 42500 M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] fallbackID -> 1234567 M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] exportTG -> 1234 M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] slot -> 2 M: 2020-10-29 01:39:46.206 YSF, Setting [YSF] RemotePort -> 6073 M: 2020-10-29 01:39:46.207 YSF, Transmitting on 127.0.0.1:42500, and listening on port 43500. Result = 1 M: 2020-10-29 01:39:46.207 MMDVM_Bridge-20200727_V1.5.9 is running I: 2020-10-29 01:39:46.207 Started the DMR Id lookup reload thread |
|
|
|
Let me see if I can simplify this.
toggle quoted message
Show quoted text
When you connect dmr2ysf through a reflector to your MB2, then your MB2 crashes with this error: I: 2020-10-29 01:39:42.281 YSF, Begin TX: src=1234567 rpt=0 dst=1234 slot=2 cc=0 metadata=302226 M: 2020-10-29 01:39:42.281 YSF, No call or id found, using ini value: VA2TB GÖè I: 2020-10-29 01:39:42.586 YSF, Narrow transmit (72 bit) Have I got this right? On 10/28/20 9:49 PM, Sylvain ve2tbu
wrote:
im running 2 mmdvmbridge. 1 link my own ysfreflector. second one link another ysf reflector. the link between ysf to ysf vw or narrow work perfectly, if i connect to my own ysf reflector from dmr2ysf hotspot the mb1 show everything ok. the second one mb2 missing last dmr id digit and close and restart.if i connect my dmr2ysf to ysfreflector 2 the mb2 work ok but the same issue in mb1.ysfreflector1.lost last dmr id digit and close and restart. using mbribdge in amd64. updated the last binary check all port all config but i cannot find anything wrong.When they crash i reveive a weird message from the last line came from dmr2ysf . |
|
|
|
swinger72@...
Thank s for the reply. Ysfreflector1 >.mbridge 1 connected to >ysfref 1. Ysfreflector 2 >mbridge 2 connecte ysfref2. I connect dmr2ysf in >ysfref1 >mb1 receive ok. Mbridge2 rx and crash so dont pass to ysfref2. Try connect dmr2ysf to >ysfref2. Mbridge 2 ok.mbridge2 > Mbrige 1 rx and crash .
|
|
|
|
swinger72@...
I link mblink 1 and mbridge 2 with rx tx ysf port to link both ysfreflector
|
|
|
|
I'm not sure I'm getting this. You have 2 YSF reflectors?
toggle quoted message
Show quoted text
On 10/29/2020 2:25 PM,
swinger72@... wrote:
Thank s for the reply. Ysfreflector1 >.mbridge 1 connected to >ysfref 1. Ysfreflector 2 >mbridge 2 connecte ysfref2. I connect dmr2ysf in >ysfref1 >mb1 receive ok. Mbridge2 rx and crash so dont pass to ysfref2. Try connect dmr2ysf to >ysfref2. Mbridge 2 ok.mbridge2 > Mbrige 1 rx and crash . |
|
|
|
Ok i use mbridge 1 connected to f1zit ysfreflector network. Mbridge 2 connected to my own fusion canada fr ysfreflector
So mbridge 1 and 2 run in my own server localy .mbridge1 ysf rxport 42500 ysf tx43500 mbridge 2 ysf rx 43500ysf tx 42500 |
|
|
|
So, it's like this:
toggle quoted message
Show quoted text
dmr2ysf <-> (F1ZIT YSF Reflector) <-> MMDVM_Bridge1 <-> MMDVM_Bridge2 <-> (fusion canada fr ysfreflector) <-> user2 When dmr2ysf transmits, MMDVM_Bridge1 passes the data OK. MMDVM_Bridge2 crashes. Do I have that correct? On 10/29/2020 2:59 PM,
swinger72@... wrote:
Ok i use mbridge 1 connected to f1zit ysfreflector network. Mbridge 2 connected to my own fusion canada fr ysfreflector |
|
|
|
swinger72@...
On Thu, Oct 29, 2020 at 03:06 PM, Steve N4IRS wrote:
So, it's like this: Yep correct. If i connect dmr2ysf to F1ZIT ysfreflector the mb2 crash. If i connect dmr2ysf to Fusioncanadafr ysfreflector so mb2 is ok and mb1 crash. |
|
|
|
Can I assume that a YSF user (no DMR2YSF) on either side, the
traffic passws fine?
toggle quoted message
Show quoted text
On 10/29/2020 3:11 PM,
swinger72@... wrote:
On Thu, Oct 29, 2020 at 03:06 PM, Steve N4IRS wrote: |
|
|
|
swinger72@...
Sorry i use the cell phone i hit the wrong button. Yes your right
When i use dmr2ysf connected to F1ZIT YSFREFLECTOR MB1 ok and mb2 crash. If i connect dmr2ysf to fusioncanada fr ysfreflector mb 2 ok mb1 crash |
|
|
|
toggle quoted message
Show quoted text
Sorry i use the cell phone i hit the wrong button. Yes your right |
|
|
|
swinger72@...
Yes fusion ysf to ysf dn or wide work perfectly
|
|
|
|
OK,
toggle quoted message
Show quoted text
I need you to turn on debugging for MMDVM_Bridge2 [System Fusion Network] Enable=0 LocalAddress=0 LocalPort=3200 GatewayAddress=127.0.0.1 GatewayPort=4200 Debug=1 Then run MMDVM_Bridge2 in the foreground. Capture ALL of the information from the start of MMDVM_Bridge2 until the crash. Please post the results. Steve On 10/29/2020 3:11 PM,
swinger72@... wrote:
On Thu, Oct 29, 2020 at 03:06 PM, Steve N4IRS wrote: |
|
|
|
swinger72@...
ok i do that tonight and i leave you both side log from mb1 and 2 .Thank s for your help. :)
|
|
|
|
swinger72@...
dmr2ysf connected to fusioncanadafr ysf reflector
Her Mbridge1 CRASH I: 2020-10-29 21:49:05.051 MMDVM_Bridge: I: 2020-10-29 21:49:05.051 Portions Copyright (C) 2018, 2019, 2020 DVSwitch, INAD. I: 2020-10-29 21:49:05.051 Hacks by Mike N4IRR and Steve N4IRS I: 2020-10-29 21:49:05.051 = I: 2020-10-29 22:07:11.755 This software is for use on amateur radio networks only, I: 2020-10-29 22:07:11.755 it is to be used for educational purposes only. Its use on I: 2020-10-29 22:07:11.755 commercial networks is strictly prohibited. I: 2020-10-29 22:07:11.755 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others M: 2020-10-29 22:07:11.755 MMDVM_Bridge-20200727_V1.5.9 is starting M: 2020-10-29 22:07:11.755 Built 16:22:31 Oct 23 2020 (GitID #0ea07ac) I: 2020-10-29 22:07:11.755 General Parameters I: 2020-10-29 22:07:11.755 Callsign: VA2TB I: 2020-10-29 22:07:11.755 Id: 302252804 I: 2020-10-29 22:07:11.755 Duplex: no I: 2020-10-29 22:07:11.755 Timeout: 180s I: 2020-10-29 22:07:11.755 D-Star: disabled I: 2020-10-29 22:07:11.755 DMR: disabled I: 2020-10-29 22:07:11.755 YSF: enabled I: 2020-10-29 22:07:11.755 P25: disabled I: 2020-10-29 22:07:11.755 NXDN: disabled I: 2020-10-29 22:07:11.755 Modem Parameters I: 2020-10-29 22:07:11.755 Port: /dev/null I: 2020-10-29 22:07:11.755 RX Invert: no I: 2020-10-29 22:07:11.755 TX Invert: no I: 2020-10-29 22:07:11.755 PTT Invert: no I: 2020-10-29 22:07:11.755 TX Delay: 100ms I: 2020-10-29 22:07:11.755 RX Offset: 0Hz I: 2020-10-29 22:07:11.755 TX Offset: 0Hz I: 2020-10-29 22:07:11.755 RX DC Offset: 0 I: 2020-10-29 22:07:11.755 TX DC Offset: 0 I: 2020-10-29 22:07:11.755 RF Level: 100.0% I: 2020-10-29 22:07:11.755 DMR Delay: 0 (0.0ms) I: 2020-10-29 22:07:11.755 RX Level: 50.0% I: 2020-10-29 22:07:11.755 CW Id TX Level: 50.0% I: 2020-10-29 22:07:11.755 D-Star TX Level: 50.0% I: 2020-10-29 22:07:11.755 DMR TX Level: 50.0% I: 2020-10-29 22:07:11.755 YSF TX Level: 50.0% I: 2020-10-29 22:07:11.755 P25 TX Level: 50.0% I: 2020-10-29 22:07:11.755 NXDN TX Level: 50.0% I: 2020-10-29 22:07:11.755 RX Frequency: 0Hz (0Hz) I: 2020-10-29 22:07:11.756 TX Frequency: 0Hz (0Hz) M: 2020-10-29 22:07:11.756 Opening the MMDVM I: 2020-10-29 22:07:11.756 Display Parameters I: 2020-10-29 22:07:11.756 Type: I: 2020-10-29 22:07:11.756 System Fusion Network Parameters I: 2020-10-29 22:07:11.756 Local Address: 0 I: 2020-10-29 22:07:11.756 Local Port: 3200 I: 2020-10-29 22:07:11.756 Gateway Address: 127.0.0.1 I: 2020-10-29 22:07:11.756 Gateway Port: 42000 I: 2020-10-29 22:07:11.756 Mode Hang: 3s M: 2020-10-29 22:07:11.756 Opening YSF network connection I: 2020-10-29 22:07:11.756 RSSI I: 2020-10-29 22:07:11.756 Mapping File: /dev/null I: 2020-10-29 22:07:11.756 Loaded 0 RSSI data mapping points from /dev/null I: 2020-10-29 22:07:11.756 DMR Id Lookups I: 2020-10-29 22:07:11.756 File: /opt/DMRIds.dat I: 2020-10-29 22:07:11.756 Reload: 24 hours I: 2020-10-29 22:07:11.810 Loaded 89800 Ids to the DMR callsign lookup table I: 2020-10-29 22:07:11.810 YSF RF Parameters I: 2020-10-29 22:07:11.810 Low Deviation: no I: 2020-10-29 22:07:11.810 Remote Gateway: no I: 2020-10-29 22:07:11.811 Self Only: no I: 2020-10-29 22:07:11.811 DSQ: no I: 2020-10-29 22:07:11.811 Mode Hang: 10s M: 2020-10-29 22:07:11.811 YSF, Opening INI file: DVSwitch.ini M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] address -> 127.0.0.1 M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] txPort -> 43500 M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] rxPort -> 42500 M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] txWidePort -> 43500 M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] fallbackID -> 1234567 M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] exportTG -> 1234 M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] slot -> 2 M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] RemotePort -> 6073 M: 2020-10-29 22:07:11.811 YSF, Transmitting on 127.0.0.1:43500, and listening on port 42500. Result = 1 M: 2020-10-29 22:07:11.811 MMDVM_Bridge-20200727_V1.5.9 is running I: 2020-10-29 22:07:11.811 Started the DMR Id lookup reload thread D: 2020-10-29 22:07:16.813 YSF Network Poll Sent D: 2020-10-29 22:07:16.813 0000: 59 53 46 50 56 41 32 54 42 20 20 20 20 20 *YSFPVA2TB * M: 2020-10-29 22:07:19.945 YSF, TX state = ON I: 2020-10-29 22:07:19.945 YSF, Begin TX: src=1234567 rpt=0 dst=1234 slot=2 cc=0 metadata=302226 M: 2020-10-29 22:07:19.945 YSF, No call or id found, using ini value: VA2TB ▒▒ D: 2020-10-29 22:07:20.179 YSF Network Data Sent D: 2020-10-29 22:07:20.179 0000: 59 53 46 44 56 41 32 54 42 20 20 20 20 20 56 41 *YSFDVA2TB VA* D: 2020-10-29 22:07:20.179 0010: 32 54 42 20 20 20 20 20 41 4C 4C 00 00 00 00 00 *2TB ALL.....* D: 2020-10-29 22:07:20.179 0020: 00 00 00 D4 71 C9 63 4D 21 36 5C 9A 1A 31 21 A0 *....q.cM!6\..1!.* D: 2020-10-29 22:07:20.179 0030: D7 DD CF B5 90 9C 5C 4B A6 03 73 D1 4F C5 11 9A *......\K..s.O...* D: 2020-10-29 22:07:20.179 0040: F7 F3 F8 F7 50 1E 53 11 8D 48 DF 23 63 C0 17 60 *....P.S..H.#c..`* D: 2020-10-29 22:07:20.179 0050: 7F 1C 88 BA A5 E0 47 56 92 26 FF 9B B9 A8 5A BA *......GV.&....Z.* D: 2020-10-29 22:07:20.179 0060: 46 92 10 14 BE E5 AA 2C D3 46 B1 19 9C 75 75 A8 *F......,.F...uu.* D: 2020-10-29 22:07:20.179 0070: F7 7F B8 11 10 F2 C6 40 DF 08 3E E8 AB C9 91 8F *.......@..>.....* D: 2020-10-29 22:07:20.180 0080: 3D EF 0E 84 25 1E 49 94 64 25 86 F6 03 57 0E 22 *=...%.I.d%...W."* D: 2020-10-29 22:07:20.180 0090: C1 A4 13 73 F6 0D FB D5 89 01 93 *...s.......* D: 2020-10-29 22:07:20.266 YSF Network Data Sent D: 2020-10-29 22:07:20.266 0000: 59 53 46 44 56 41 32 54 42 20 20 20 20 20 56 41 *YSFDVA2TB VA* D: 2020-10-29 22:07:20.266 0010: 32 54 42 20 20 20 20 20 41 4C 4C 00 00 00 00 00 *2TB ALL.....* D: 2020-10-29 22:07:20.266 0020: 00 00 02 D4 71 C9 63 4D 11 C6 5C 73 65 F2 B1 A0 *....q.cM..\se...* D: 2020-10-29 22:07:20.266 0030: A0 23 8E 45 93 98 C6 07 66 01 ED FA C5 05 11 6F *.#.E....f......o* D: 2020-10-29 22:07:20.266 0040: BF E7 7B FC 86 E1 7B B2 8E 43 36 E4 A2 39 78 49 *..{...{..C6..9xI* D: 2020-10-29 22:07:20.266 0050: 33 68 32 48 53 58 79 6D 7B B2 8E 43 36 E4 A2 39 *3h2HSXym{..C6..9* D: 2020-10-29 22:07:20.267 0060: 78 49 33 68 32 A9 F0 EB FD CE 7B B2 8E 43 36 E4 *xI3h2.....{..C6.* D: 2020-10-29 22:07:20.267 0070: A2 39 78 49 33 68 32 18 FB 30 1A 57 59 90 AC 61 *.9xI3h2..0.WY..a* D: 2020-10-29 22:07:20.267 0080: 14 C5 A2 39 78 4D 77 68 36 34 DF 19 46 E0 7B B2 *...9xMwh64..F.{.* D: 2020-10-29 22:07:20.267 0090: 8E 43 36 E4 A2 39 78 49 33 68 32 *.C6..9xI3h2* I: 2020-10-29 22:07:20.267 YSF, Narrow transmit (72 bit) Segmentation fault (core dumped) |
|
|
|
k7wby@...
Looks like 2 MB's trying to run at the same time in the same namespace.
|
|
|
|
I don't think they are trying to share .ini files since each
instance of MB will need DVSwitch.ini to define a unique set of
ports. Also, he reports that a normal user (not using DMR2YSF) has
no problem.
toggle quoted message
Show quoted text
On 10/30/2020 10:07 AM, k7wby@...
wrote:
Looks like 2 MB's trying to run at the same time in the same namespace. |
|
|
|
swinger72@...
Each instance running in separate folder. On mb2 i see my id 3022260 and in log mb1 crash i see 302226 ? Midsing number
|
|
|
|
Just in case, please include copies of the MB.ini and the
DVSwitch.ini for each directory. Based on the fact that a normal
user does not have the issue, makes me think it's a bug somewhere. I
can tell you taht it will be at least a few days before it can even
be looked at.
toggle quoted message
Show quoted text
Steve On 10/30/2020 10:52 AM,
swinger72@... wrote:
Each instance running in separate folder. On mb2 i see my id 3022260 and in log mb1 crash i see 302226 ? Midsing number |
|
|
|
swinger72@...
mbridge 1.ini
[General] Callsign=VA2TB Id=302252802 Timeout=180 Duplex=0 [Info] RXFrequency=000000000 TXFrequency=000000000 Power=1 Latitude=41.7333 Longitude=-50.3999 Height=0 Location= Description=MMDVM_Bridge URL=https: [Log] # Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal DisplayLevel=1 FileLevel=2 FilePath=/var/log/MMDVM_Bridge FileRoot=MMDVM_Bridge [DMR Id Lookup] File=/opt/DMRIds.dat Time=24 [NXDN Id Lookup] File=/var/lib/mmdvm/NXDN.csv Time=24 [Modem] Port=/dev/null RSSIMappingFile=/dev/null Trace=0 Debug=0 [D-Star] Enable=0 Module=B [DMR] Enable=0 ColorCode=1 EmbeddedLCOnly=1 DumpTAData=0 [System Fusion] Enable=1 [P25] Enable=0 NAC=293 [NXDN] Enable=0 RAN=1 Id=12345 [D-Star Network] Enable=0 GatewayAddress=127.0.0.1 GatewayPort=20010 LocalPort=20011 Debug=0 [DMR Network] Enable=0 Address=hblink.dvswitch.org Port=62031 Jitter=360 Local=62032 Password=passw0rd # for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md # for XLX the syntax is: Options=XLX:4009 # Options= Slot1=0 Slot2=1 Debug=0 [System Fusion Network] Enable=1 LocalAddress=0 LocalPort=42200 GatewayAddress=151.80.143.185 GatewayPort=42002 Debug=1 [P25 Network] Enable=0 GatewayAddress=127.0.0.1 GatewayPort=42020 LocalPort=32010 Debug=0 [NXDN Network] Enable=0 #LocalAddress=127.0.0.1 Debug=0 LocalPort=14021 GatewayAddress=127.0.0.1 GatewayPort=14020 dvswitch ; MMDVM_Bridge export / import configuration file. ; This file should be placed along side of MMDVM_Bridge or you can supply ; an absolute path in the DVSWITCH environment variable, e.g: ; DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini ; before executing MMDVM_Bridge ; ; Another method to set the enviorment variable is to use the systemd unit file ; by adding: ; Environment=DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini ; to /lib/systemd/system/mmdvm_bridge.service ; Configure the Quantar Repeater Partner ; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge [QUANTAR] address = 0.0.0.0 ; Address to send IMBE TLV frames to (export) txPort = 34103 ; Port to send IMBE TLV frames to (export) rxPort = 34100 ; Port to listen for IMBE TLV frames on (import) quantarPort = 1994 ; HDLC frames To/From the Quantar repeater debug = 0 ; Debug 0 = off, 1 = on (adds lots of additional messages) logLevel = 2 ; Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal logFilePath = /var/log/dvswitch/Quantar_Bridge.log ; Configure the DMR Partner ; Audio format is AMBE 72 bit [DMR] address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) txPort = 31100 ; Port to send AMBE TLV frames to (export) rxPort = 31103 ; Port to listen on (import) slot = 2 ; Export slot exportTG = 0 ; Which TG to export hangTimerInFrames = 0 ; Use 50 for 3 seconds of hang time (3000 / 60) talkerAlias = %callsign %location %description ; Get callsign location and description from MMDVM_Bridge.ini ; Configure the D-Star Partner ; Audio format is AMBE 48 bit (DSAMBE) [DSTAR] address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) txPort = 32100 ; Port to send AMBE TLV frames to (export) rxPort = 32103 ; Port to listen on (import) fallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one exportTG = 9 ; Which TG to export slot = 2 ; Export slot RemotePort = 54321 ; Port to send Gateway commands to message = %location %description ; Get location and description from MMDVM_Bridge.ini ; Configure the NXDN Partner ; Audio format is AMBE 72 bit [NXDN] address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) txPort = 33100 ; Port to send AMBE TLV frames to (export) rxPort = 33103 ; Port to listen on (import) fallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one nxdnFallbackID = 12345 ; Use this ID when the input DMR ID is not found in the database translate = 1234=4321 ; Translate NXDN TG < -- > DMR TG (bidirectional) slot = 2 ; Export slot RemotePort = 6075 ; Port to send Gateway commands to ; Configure the P25 Partner ; Audio format is IMBE 88 bit [P25] address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) txPort = 34100 ; Port to send AMBE TLV frames to (export) rxPort = 34103 ; Port to listen on (import) slot = 2 ; Export slot RemotePort = 6074 ; Port to send Gateway commands to ; Configure the Yaesu Fusion Partner ; Audio format is AMBE 72 bit ; Audio format is IMBE 88 bit [YSF] address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) txPort = 42500 ; Port to send AMBE TLV frames to (export) rxPort = 43500 ; Port to listen on (import) txWidePort = 42500 ; Port to send IMBE TLV frames to for YSFw (export) fallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one exportTG = 1234 ; Which TG to export slot = 2 ; Export slot RemotePort = 6073 ; Port to send Gateway commands to |
|
|