#brandmeister #brandmeister


Bill Kittilson <bill.kittilson@...>
 

Ok Thanks again for your help.

73 Bill N3JHS


Steve N4IRS
 

Bill,
You don't need a repeater ID for a bridge. Using your DMR ID for a TG number is just fine. Look in Analog_Bridge.ini for this:

[AMBE_AUDIO]
minTxTimeMS = 2500                      ; Analog -> Digital Minimum time in MS for hang delay (0-10000)


Increase the value to 3000 and restart Analog_brige. That should help.

Steve N4IRS

On 3/23/2021 1:25 PM, Bill Kittilson wrote:
Thanks! That fixed the issue.  Not sure how that got deleted.  
I'm using my DMR ID as the talk group.   This seams to work until someone on my allstar or DMR has a bad connection and drop the connection too many times Then I get "user blocked" from Brandmister.  

Someone said get a repeater ID, I have one but no idea how to use it for the bridge.  Have you use a repeater id for bridging?


Thanks
Bill


Bill Kittilson <bill.kittilson@...>
 

Thanks! That fixed the issue.  Not sure how that got deleted.  
I'm using my DMR ID as the talk group.   This seams to work until someone on my allstar or DMR has a bad connection and drop the connection too many times Then I get "user blocked" from Brandmister.  

Someone said get a repeater ID, I have one but no idea how to use it for the bridge.  Have you use a repeater id for bridging?


Thanks
Bill


Steve N4IRS
 

Your network should look like this:

[DMR Network]
Port=62031
Local=62032

Plus all your other settings.


On 3/23/2021 1:04 PM, Bill Kittilson wrote:
Changed the port


 
I: 2021-03-23 17:03:32.441 General Parameters
I: 2021-03-23 17:03:32.441     Callsign: N3JHS
I: 2021-03-23 17:03:32.441     Id: 314210310
I: 2021-03-23 17:03:32.441     Duplex: no
I: 2021-03-23 17:03:32.441     Timeout: 180s
I: 2021-03-23 17:03:32.441     D-Star: disabled
I: 2021-03-23 17:03:32.441     DMR: enabled
I: 2021-03-23 17:03:32.441     YSF: enabled
I: 2021-03-23 17:03:32.441     P25: disabled
I: 2021-03-23 17:03:32.441     NXDN: disabled
I: 2021-03-23 17:03:32.442 Modem Parameters
I: 2021-03-23 17:03:32.442     Port: /dev/null
I: 2021-03-23 17:03:32.442     RX Invert: no
I: 2021-03-23 17:03:32.442     TX Invert: no
I: 2021-03-23 17:03:32.442     PTT Invert: no
I: 2021-03-23 17:03:32.442     TX Delay: 100ms
I: 2021-03-23 17:03:32.442     RX Offset: 0Hz
I: 2021-03-23 17:03:32.442     TX Offset: 0Hz
I: 2021-03-23 17:03:32.442     RX DC Offset: 0
I: 2021-03-23 17:03:32.442     TX DC Offset: 0
I: 2021-03-23 17:03:32.442     RF Level: 100.0%
I: 2021-03-23 17:03:32.442     DMR Delay: 0 (0.0ms)
I: 2021-03-23 17:03:32.442     RX Level: 50.0%
I: 2021-03-23 17:03:32.442     CW Id TX Level: 50.0%
I: 2021-03-23 17:03:32.442     D-Star TX Level: 50.0%
I: 2021-03-23 17:03:32.442     DMR TX Level: 50.0%
I: 2021-03-23 17:03:32.442     YSF TX Level: 50.0%
I: 2021-03-23 17:03:32.442     P25 TX Level: 50.0%
I: 2021-03-23 17:03:32.443     NXDN TX Level: 50.0%
I: 2021-03-23 17:03:32.443     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 17:03:32.443     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 17:03:32.443 Opening the MMDVM
I: 2021-03-23 17:03:32.443 Display Parameters
I: 2021-03-23 17:03:32.443     Type:
I: 2021-03-23 17:03:32.443 DMR Network Parameters
I: 2021-03-23 17:03:32.443     Address: 3103.repeater.net
I: 2021-03-23 17:03:32.443     Port: 0
I: 2021-03-23 17:03:32.443     Local: 62032
I: 2021-03-23 17:03:32.443     Jitter: 360ms
I: 2021-03-23 17:03:32.443     Slot 1: disabled
I: 2021-03-23 17:03:32.443     Slot 2: enabled
I: 2021-03-23 17:03:32.443     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigned int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool, bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
 


Bill Kittilson <bill.kittilson@...>
 

Changed the port


 
I: 2021-03-23 17:03:32.441 General Parameters
I: 2021-03-23 17:03:32.441     Callsign: N3JHS
I: 2021-03-23 17:03:32.441     Id: 314210310
I: 2021-03-23 17:03:32.441     Duplex: no
I: 2021-03-23 17:03:32.441     Timeout: 180s
I: 2021-03-23 17:03:32.441     D-Star: disabled
I: 2021-03-23 17:03:32.441     DMR: enabled
I: 2021-03-23 17:03:32.441     YSF: enabled
I: 2021-03-23 17:03:32.441     P25: disabled
I: 2021-03-23 17:03:32.441     NXDN: disabled
I: 2021-03-23 17:03:32.442 Modem Parameters
I: 2021-03-23 17:03:32.442     Port: /dev/null
I: 2021-03-23 17:03:32.442     RX Invert: no
I: 2021-03-23 17:03:32.442     TX Invert: no
I: 2021-03-23 17:03:32.442     PTT Invert: no
I: 2021-03-23 17:03:32.442     TX Delay: 100ms
I: 2021-03-23 17:03:32.442     RX Offset: 0Hz
I: 2021-03-23 17:03:32.442     TX Offset: 0Hz
I: 2021-03-23 17:03:32.442     RX DC Offset: 0
I: 2021-03-23 17:03:32.442     TX DC Offset: 0
I: 2021-03-23 17:03:32.442     RF Level: 100.0%
I: 2021-03-23 17:03:32.442     DMR Delay: 0 (0.0ms)
I: 2021-03-23 17:03:32.442     RX Level: 50.0%
I: 2021-03-23 17:03:32.442     CW Id TX Level: 50.0%
I: 2021-03-23 17:03:32.442     D-Star TX Level: 50.0%
I: 2021-03-23 17:03:32.442     DMR TX Level: 50.0%
I: 2021-03-23 17:03:32.442     YSF TX Level: 50.0%
I: 2021-03-23 17:03:32.442     P25 TX Level: 50.0%
I: 2021-03-23 17:03:32.443     NXDN TX Level: 50.0%
I: 2021-03-23 17:03:32.443     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 17:03:32.443     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 17:03:32.443 Opening the MMDVM
I: 2021-03-23 17:03:32.443 Display Parameters
I: 2021-03-23 17:03:32.443     Type:
I: 2021-03-23 17:03:32.443 DMR Network Parameters
I: 2021-03-23 17:03:32.443     Address: 3103.repeater.net
I: 2021-03-23 17:03:32.443     Port: 0
I: 2021-03-23 17:03:32.443     Local: 62032
I: 2021-03-23 17:03:32.443     Jitter: 360ms
I: 2021-03-23 17:03:32.443     Slot 1: disabled
I: 2021-03-23 17:03:32.443     Slot 2: enabled
I: 2021-03-23 17:03:32.443     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigned int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool, bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
 


Steve N4IRS
 

See my message about the port and local port.


On 3/23/2021 12:55 PM, Bill Kittilson wrote:
M: 2021-03-23 16:52:25.359 MMDVM_Bridge-20200309_V1.5.1 is starting
M: 2021-03-23 16:52:25.359 Built 19:52:05 May 16 2020 (GitID #fcd30b9)
I: 2021-03-23 16:52:25.359 General Parameters
I: 2021-03-23 16:52:25.359     Callsign: N3JHS
I: 2021-03-23 16:52:25.359     Id: 314210311
I: 2021-03-23 16:52:25.359     Duplex: no
I: 2021-03-23 16:52:25.359     Timeout: 180s
I: 2021-03-23 16:52:25.359     D-Star: disabled
I: 2021-03-23 16:52:25.359     DMR: enabled
I: 2021-03-23 16:52:25.359     YSF: enabled
I: 2021-03-23 16:52:25.359     P25: disabled
I: 2021-03-23 16:52:25.359     NXDN: disabled
I: 2021-03-23 16:52:25.359 Modem Parameters
I: 2021-03-23 16:52:25.359     Port: /dev/null
I: 2021-03-23 16:52:25.360     RX Invert: no
I: 2021-03-23 16:52:25.360     TX Invert: no
I: 2021-03-23 16:52:25.360     PTT Invert: no
I: 2021-03-23 16:52:25.360     TX Delay: 100ms
I: 2021-03-23 16:52:25.360     RX Offset: 0Hz
I: 2021-03-23 16:52:25.360     TX Offset: 0Hz
I: 2021-03-23 16:52:25.360     RX DC Offset: 0
I: 2021-03-23 16:52:25.360     TX DC Offset: 0
I: 2021-03-23 16:52:25.360     RF Level: 100.0%
I: 2021-03-23 16:52:25.360     DMR Delay: 0 (0.0ms)
I: 2021-03-23 16:52:25.360     RX Level: 50.0%
I: 2021-03-23 16:52:25.360     CW Id TX Level: 50.0%
I: 2021-03-23 16:52:25.360     D-Star TX Level: 50.0%
I: 2021-03-23 16:52:25.360     DMR TX Level: 50.0%
I: 2021-03-23 16:52:25.360     YSF TX Level: 50.0%
I: 2021-03-23 16:52:25.360     P25 TX Level: 50.0%
I: 2021-03-23 16:52:25.360     NXDN TX Level: 50.0%
I: 2021-03-23 16:52:25.360     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 16:52:25.361     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 16:52:25.361 Opening the MMDVM
I: 2021-03-23 16:52:25.361 Display Parameters
I: 2021-03-23 16:52:25.361     Type:
I: 2021-03-23 16:52:25.361 DMR Network Parameters
I: 2021-03-23 16:52:25.361     Address: 3103.repeater.net
I: 2021-03-23 16:52:25.361     Port: 0
I: 2021-03-23 16:52:25.361     Local: 62031
I: 2021-03-23 16:52:25.361     Jitter: 360ms
I: 2021-03-23 16:52:25.362     Slot 1: disabled
I: 2021-03-23 16:52:25.362     Slot 2: enabled
I: 2021-03-23 16:52:25.362     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigne                                d int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool,                                 bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
root@raspberrypi:/opt/MMDVM_Bridge#
 


Bill Kittilson <bill.kittilson@...>
 

M: 2021-03-23 16:52:25.359 MMDVM_Bridge-20200309_V1.5.1 is starting
M: 2021-03-23 16:52:25.359 Built 19:52:05 May 16 2020 (GitID #fcd30b9)
I: 2021-03-23 16:52:25.359 General Parameters
I: 2021-03-23 16:52:25.359     Callsign: N3JHS
I: 2021-03-23 16:52:25.359     Id: 314210311
I: 2021-03-23 16:52:25.359     Duplex: no
I: 2021-03-23 16:52:25.359     Timeout: 180s
I: 2021-03-23 16:52:25.359     D-Star: disabled
I: 2021-03-23 16:52:25.359     DMR: enabled
I: 2021-03-23 16:52:25.359     YSF: enabled
I: 2021-03-23 16:52:25.359     P25: disabled
I: 2021-03-23 16:52:25.359     NXDN: disabled
I: 2021-03-23 16:52:25.359 Modem Parameters
I: 2021-03-23 16:52:25.359     Port: /dev/null
I: 2021-03-23 16:52:25.360     RX Invert: no
I: 2021-03-23 16:52:25.360     TX Invert: no
I: 2021-03-23 16:52:25.360     PTT Invert: no
I: 2021-03-23 16:52:25.360     TX Delay: 100ms
I: 2021-03-23 16:52:25.360     RX Offset: 0Hz
I: 2021-03-23 16:52:25.360     TX Offset: 0Hz
I: 2021-03-23 16:52:25.360     RX DC Offset: 0
I: 2021-03-23 16:52:25.360     TX DC Offset: 0
I: 2021-03-23 16:52:25.360     RF Level: 100.0%
I: 2021-03-23 16:52:25.360     DMR Delay: 0 (0.0ms)
I: 2021-03-23 16:52:25.360     RX Level: 50.0%
I: 2021-03-23 16:52:25.360     CW Id TX Level: 50.0%
I: 2021-03-23 16:52:25.360     D-Star TX Level: 50.0%
I: 2021-03-23 16:52:25.360     DMR TX Level: 50.0%
I: 2021-03-23 16:52:25.360     YSF TX Level: 50.0%
I: 2021-03-23 16:52:25.360     P25 TX Level: 50.0%
I: 2021-03-23 16:52:25.360     NXDN TX Level: 50.0%
I: 2021-03-23 16:52:25.360     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 16:52:25.361     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 16:52:25.361 Opening the MMDVM
I: 2021-03-23 16:52:25.361 Display Parameters
I: 2021-03-23 16:52:25.361     Type:
I: 2021-03-23 16:52:25.361 DMR Network Parameters
I: 2021-03-23 16:52:25.361     Address: 3103.repeater.net
I: 2021-03-23 16:52:25.361     Port: 0
I: 2021-03-23 16:52:25.361     Local: 62031
I: 2021-03-23 16:52:25.361     Jitter: 360ms
I: 2021-03-23 16:52:25.362     Slot 1: disabled
I: 2021-03-23 16:52:25.362     Slot 2: enabled
I: 2021-03-23 16:52:25.362     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigne                                d int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool,                                 bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
root@raspberrypi:/opt/MMDVM_Bridge#
 


Steve N4IRS
 

Well,
The log file says it's running. Did you change anything with the program?

On 3/23/2021 12:49 PM, Bill Kittilson wrote:
On Tue, Mar 23, 2021 at 09:38 AM, Steve N4IRS wrote:
./MMDVM_Bridge MMDVM_Bridge.ini
 
-bash: ./MMDVM_Bridge: cannot execute binary file: Exec format error

Im on Pi if that makes any differance.




Bill Kittilson <bill.kittilson@...>
 

On Tue, Mar 23, 2021 at 09:38 AM, Steve N4IRS wrote:
./MMDVM_Bridge MMDVM_Bridge.ini
 
-bash: ./MMDVM_Bridge: cannot execute binary file: Exec format error

Im on Pi if that makes any differance.



Steve N4IRS
 

Bill,
You sent this for your config:

[DMR Network]

Enable=1

Address=3103.repeater.net

Jitter=360

Local=62031 <--------------------------- Should be 62032

Password=mypassword

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=1


And this is in your log:

I: 2021-03-23 15:56:02.905 DMR Network Parameters
I: 2021-03-23 15:56:02.905     Address: 3103.repeater.net
I: 2021-03-23 15:56:02.905     Port: 0 <----------------------------------- Should be 62031
I: 2021-03-23 15:56:02.905     Local: 62031 <--------------------------- Should be 62032
I: 2021-03-23 15:56:02.905     Jitter: 360ms
I: 2021-03-23 15:56:02.905     Slot 1: disabled
I: 2021-03-23 15:56:02.905     Slot 2: enabled
I: 2021-03-23 15:56:02.905     Mode Hang: 3s


Port seems to be missing from the [DMR Network] section and local port is wrong.


Steve N4IRS


On 3/23/2021 12:34 PM, Bill Kittilson wrote:
On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
I would like to see the log where MB is trying to connect to BM.


Steve N4IRS
 

Based on the log, I think MB has a problem with the config. Not sure what. I would:
systemctl stop mmdvm_bridge
cd /opt/MMDVM_Bridge
./MMDVM_Bridge MMDVM_Bridge.ini
show the result, to the end.

Steve

On 3/23/2021 12:34 PM, Bill Kittilson wrote:
On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
I would like to see the log where MB is trying to connect to BM.


Bill Kittilson <bill.kittilson@...>
 

On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
I would like to see the log where MB is trying to connect to BM.


Steve N4IRS
 

OK,
Your settings look good. I would like to see the log where MB is trying to connect to BM.

On 3/23/2021 12:25 PM, Bill Kittilson wrote:
log file:

I: 2021-03-23 15:56:02.904     Callsign: N3JHS
I: 2021-03-23 15:56:02.904     Id: 3142103
I: 2021-03-23 15:56:02.904     Duplex: no
I: 2021-03-23 15:56:02.904     Timeout: 180s
I: 2021-03-23 15:56:02.905     D-Star: disabled
I: 2021-03-23 15:56:02.905     DMR: enabled
I: 2021-03-23 15:56:02.905     YSF: enabled
I: 2021-03-23 15:56:02.905     P25: disabled
I: 2021-03-23 15:56:02.905     NXDN: disabled
I: 2021-03-23 15:56:02.905 Modem Parameters
I: 2021-03-23 15:56:02.905     Port: /dev/null
I: 2021-03-23 15:56:02.905     RX Invert: no
I: 2021-03-23 15:56:02.905     TX Invert: no
I: 2021-03-23 15:56:02.905     PTT Invert: no
I: 2021-03-23 15:56:02.905     TX Delay: 100ms
I: 2021-03-23 15:56:02.905     RX Offset: 0Hz
I: 2021-03-23 15:56:02.905     TX Offset: 0Hz
I: 2021-03-23 15:56:02.905     RX DC Offset: 0
I: 2021-03-23 15:56:02.905     TX DC Offset: 0
I: 2021-03-23 15:56:02.905     RF Level: 100.0%
I: 2021-03-23 15:56:02.905     DMR Delay: 0 (0.0ms)
I: 2021-03-23 15:56:02.905     RX Level: 50.0%
I: 2021-03-23 15:56:02.905     CW Id TX Level: 50.0%
I: 2021-03-23 15:56:02.905     D-Star TX Level: 50.0%
I: 2021-03-23 15:56:02.905     DMR TX Level: 50.0%
I: 2021-03-23 15:56:02.905     YSF TX Level: 50.0%
I: 2021-03-23 15:56:02.905     P25 TX Level: 50.0%
I: 2021-03-23 15:56:02.905     NXDN TX Level: 50.0%
I: 2021-03-23 15:56:02.905     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 15:56:02.905     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 15:56:02.905 Opening the MMDVM
I: 2021-03-23 15:56:02.905 Display Parameters
I: 2021-03-23 15:56:02.905     Type: 
I: 2021-03-23 15:56:02.905 DMR Network Parameters
I: 2021-03-23 15:56:02.905     Address: 3103.repeater.net
I: 2021-03-23 15:56:02.905     Port: 0
I: 2021-03-23 15:56:02.905     Local: 62031
I: 2021-03-23 15:56:02.905     Jitter: 360ms
I: 2021-03-23 15:56:02.905     Slot 1: disabled
I: 2021-03-23 15:56:02.905     Slot 2: enabled
I: 2021-03-23 15:56:02.905     Mode Hang: 3s

[General]
Callsign=N3JHS
Id=3142103
Timeout=180
Duplex=0
 
[Info]
RXFrequency=446100000
TXFrequency=446100000
Power=1
Latitude=40.151390
Longitude=-74.827390
Height=30
Location=Levittown, PA
Description=MMDVM_Bridge
 
 


Bill Kittilson <bill.kittilson@...>
 

log file:

I: 2021-03-23 15:56:02.904     Callsign: N3JHS
I: 2021-03-23 15:56:02.904     Id: 3142103
I: 2021-03-23 15:56:02.904     Duplex: no
I: 2021-03-23 15:56:02.904     Timeout: 180s
I: 2021-03-23 15:56:02.905     D-Star: disabled
I: 2021-03-23 15:56:02.905     DMR: enabled
I: 2021-03-23 15:56:02.905     YSF: enabled
I: 2021-03-23 15:56:02.905     P25: disabled
I: 2021-03-23 15:56:02.905     NXDN: disabled
I: 2021-03-23 15:56:02.905 Modem Parameters
I: 2021-03-23 15:56:02.905     Port: /dev/null
I: 2021-03-23 15:56:02.905     RX Invert: no
I: 2021-03-23 15:56:02.905     TX Invert: no
I: 2021-03-23 15:56:02.905     PTT Invert: no
I: 2021-03-23 15:56:02.905     TX Delay: 100ms
I: 2021-03-23 15:56:02.905     RX Offset: 0Hz
I: 2021-03-23 15:56:02.905     TX Offset: 0Hz
I: 2021-03-23 15:56:02.905     RX DC Offset: 0
I: 2021-03-23 15:56:02.905     TX DC Offset: 0
I: 2021-03-23 15:56:02.905     RF Level: 100.0%
I: 2021-03-23 15:56:02.905     DMR Delay: 0 (0.0ms)
I: 2021-03-23 15:56:02.905     RX Level: 50.0%
I: 2021-03-23 15:56:02.905     CW Id TX Level: 50.0%
I: 2021-03-23 15:56:02.905     D-Star TX Level: 50.0%
I: 2021-03-23 15:56:02.905     DMR TX Level: 50.0%
I: 2021-03-23 15:56:02.905     YSF TX Level: 50.0%
I: 2021-03-23 15:56:02.905     P25 TX Level: 50.0%
I: 2021-03-23 15:56:02.905     NXDN TX Level: 50.0%
I: 2021-03-23 15:56:02.905     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 15:56:02.905     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 15:56:02.905 Opening the MMDVM
I: 2021-03-23 15:56:02.905 Display Parameters
I: 2021-03-23 15:56:02.905     Type: 
I: 2021-03-23 15:56:02.905 DMR Network Parameters
I: 2021-03-23 15:56:02.905     Address: 3103.repeater.net
I: 2021-03-23 15:56:02.905     Port: 0
I: 2021-03-23 15:56:02.905     Local: 62031
I: 2021-03-23 15:56:02.905     Jitter: 360ms
I: 2021-03-23 15:56:02.905     Slot 1: disabled
I: 2021-03-23 15:56:02.905     Slot 2: enabled
I: 2021-03-23 15:56:02.905     Mode Hang: 3s

[General]
Callsign=N3JHS
Id=3142103
Timeout=180
Duplex=0
 
[Info]
RXFrequency=446100000
TXFrequency=446100000
Power=1
Latitude=40.151390
Longitude=-74.827390
Height=30
Location=Levittown, PA
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch
 
 


Steve N4IRS
 

Set duplex = 0
frequencies to simplex
make sure callsign and dmrID point to correct user.

What does the log show?

On 3/23/2021 12:10 PM, Bill Kittilson wrote:

I am no longer able to connect to brandmister,  I checked with brandmister and I am not blocked.   I did enable my password and changed the MMDVM_bridge.ini file.  I did fix the frequency in the file also.  

 

Is this the current version of MMDVM_Bridge  1.01-20180420-3?

 

 

[DMR Network]

Enable=1

Address=3103.repeater.net

Jitter=360

Local=62031

Password=mypassword

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=1

 

 

Any ideas?

 

 

Thanks

Bill N3JHS



Bill Kittilson <bill.kittilson@...>
 

I am no longer able to connect to brandmister,  I checked with brandmister and I am not blocked.   I did enable my password and changed the MMDVM_bridge.ini file.  I did fix the frequency in the file also.  

 

Is this the current version of MMDVM_Bridge  1.01-20180420-3?

 

 

[DMR Network]

Enable=1

Address=3103.repeater.net

Jitter=360

Local=62031

Password=mypassword

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=1

 

 

Any ideas?

 

 

Thanks

Bill N3JHS