|
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way.  I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
So everything you want to do is via asl. The problem you have is since you connected everything directly to the main node you will not be able to connect or disconnect anything on demand.
The way I do it is with multiple private nodes. I have a node for echolink a node for a dmr bridge a node for an xlx bridge. Then I use the startup macro on the main node to connect to all the private nodes on startup. Then if I need to disconnect a mode, link echolink for example, I just disconnect that node and it’s not on the system. Then I can connect it back.
You can do it with the html client by creating elements for connect node x, another for disconnect node x, another for connect node y etc etc. then you can connect and disconnect modes from there. In the TG element you would put someone like “*31999” to connect node x and then *21999 to disonnect node x
Hopefully that makes sense.
On Mar 26, 2021, at 18:25, Pierre Martel <petem001@...> wrote:
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way. <dvs.png> I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
It make total sens but it also mean that I have to connect the private nodes to an analog bridge and this analog bridge to one reflector of the specific digital network , so that would mean at least 4 more analog bridges
So everything you want to do is via asl. The problem you have is since you connected everything directly to the main node you will not be able to connect or disconnect anything on demand.
The way I do it is with multiple private nodes. I have a node for echolink a node for a dmr bridge a node for an xlx bridge. Then I use the startup macro on the main node to connect to all the private nodes on startup. Then if I need to disconnect a mode, link echolink for example, I just disconnect that node and it’s not on the system. Then I can connect it back.
You can do it with the html client by creating elements for connect node x, another for disconnect node x, another for connect node y etc etc. then you can connect and disconnect modes from there. In the TG element you would put someone like “*31999” to connect node x and then *21999 to disonnect node x
Hopefully that makes sense. On Mar 26, 2021, at 18:25, Pierre Martel <petem001@...> wrote:
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way. <dvs.png> I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
Only for the dmr bridge. The Hamshack hotline bridge would connect directly to a private node as would echolink. I don’t know how many other connections you have, but the echolink and hh ones would not need analog bridge.
On Mar 26, 2021, at 18:53, Pierre Martel <petem001@...> wrote:
It make total sens but it also mean that I have to connect the private nodes to an analog bridge and this analog bridge to one reflector of the specific digital network , so that would mean at least 4 more analog bridges
So everything you want to do is via asl. The problem you have is since you connected everything directly to the main node you will not be able to connect or disconnect anything on demand.
The way I do it is with multiple private nodes. I have a node for echolink a node for a dmr bridge a node for an xlx bridge. Then I use the startup macro on the main node to connect to all the private nodes on startup. Then if I need to disconnect a mode, link echolink for example, I just disconnect that node and it’s not on the system. Then I can connect it back.
You can do it with the html client by creating elements for connect node x, another for disconnect node x, another for connect node y etc etc. then you can connect and disconnect modes from there. In the TG element you would put someone like “*31999” to connect node x and then *21999 to disonnect node x
Hopefully that makes sense. On Mar 26, 2021, at 18:25, Pierre Martel <petem001@...> wrote:
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way. <dvs.png> I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
I want the asl hh and dmr tg to stay connected all the time. But all the other digital networks connect on demand. The 30288 TG is an RF link to HH and ASL and it was designed for that permanently
Only for the dmr bridge. The Hamshack hotline bridge would connect directly to a private node as would echolink. I don’t know how many other connections you have, but the echolink and hh ones would not need analog bridge. On Mar 26, 2021, at 18:53, Pierre Martel <petem001@...> wrote:
It make total sens but it also mean that I have to connect the private nodes to an analog bridge and this analog bridge to one reflector of the specific digital network , so that would mean at least 4 more analog bridges
So everything you want to do is via asl. The problem you have is since you connected everything directly to the main node you will not be able to connect or disconnect anything on demand.
The way I do it is with multiple private nodes. I have a node for echolink a node for a dmr bridge a node for an xlx bridge. Then I use the startup macro on the main node to connect to all the private nodes on startup. Then if I need to disconnect a mode, link echolink for example, I just disconnect that node and it’s not on the system. Then I can connect it back.
You can do it with the html client by creating elements for connect node x, another for disconnect node x, another for connect node y etc etc. then you can connect and disconnect modes from there. In the TG element you would put someone like “*31999” to connect node x and then *21999 to disonnect node x
Hopefully that makes sense. On Mar 26, 2021, at 18:25, Pierre Martel <petem001@...> wrote:
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way. <dvs.png> I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
Steve N4IRS
Not sure I'm getting this. Let's start with the full time links.
Name them and tell us what networks they are on.
Steve
On 3/26/21 7:05 PM, Pierre Martel
wrote:
I want the asl hh and dmr tg to stay connected all
the time. But all the other digital networks connect on demand.
The 30288 TG is an RF link to HH and ASL and it was designed for
that permanently
Only for the dmr bridge. The Hamshack hotline
bridge would connect directly to a private node as would
echolink. I don’t know how many other connections you have,
but the echolink and hh ones would not need analog bridge.
On Mar 26, 2021, at 18:53, Pierre
Martel <petem001@...>
wrote:
It make total sens but it also mean that
I have to connect the private nodes to an analog
bridge and this analog bridge to one reflector of the
specific digital network , so that would mean at least
4 more analog bridges
So everything you want to do is via
asl. The problem you have is since you connected
everything directly to the main node you will not
be able to connect or disconnect anything on
demand.
The way I do it is with multiple private
nodes. I have a node for echolink a node for a
dmr bridge a node for an xlx bridge. Then I use
the startup macro on the main node to connect to
all the private nodes on startup. Then if I need
to disconnect a mode, link echolink for example,
I just disconnect that node and it’s not on the
system. Then I can connect it back.
You can do it with the html client by
creating elements for connect node x, another
for disconnect node x, another for connect node
y etc etc. then you can connect and disconnect
modes from there. In the TG element you would
put someone like “*31999” to connect node x and
then *21999 to disonnect node x
Hopefully that makes sense.
On Mar 26, 2021, at
18:25, Pierre Martel <petem001@...>
wrote:
Sorry I could be asking an
obvious question. But since I was not
following the whole development of the dvs
suite I am kind of lost right now
I have a vps that is running ASL that I
installed from the repo, I also installed
dvs server from the repo. And used the
script to connect to BM Canada on a fix TG
and I have Hamshack Hotline . I have what it
seem all the other network ready but I have
no Idea how I can connect them on demand or
even in a fix way.
<dvs.png>
I tried to find how to connect the html
client or the android app but I just cant
find the proper way. I have no private node
on the systeme. the node is reporting to
ASL.
Should I add a private node?
Thanks
Pierre
VE2PF
|
|
|
Got ya. Ok. Then leave hh the way it is and yes you will need a private node and ab/mb combos for each other network to connect and disconnect on demand.
On Mar 26, 2021, at 19:06, Pierre Martel <petem001@...> wrote:
I want the asl hh and dmr tg to stay connected all the time. But all the other digital networks connect on demand. The 30288 TG is an RF link to HH and ASL and it was designed for that permanently
Only for the dmr bridge. The Hamshack hotline bridge would connect directly to a private node as would echolink. I don’t know how many other connections you have, but the echolink and hh ones would not need analog bridge. On Mar 26, 2021, at 18:53, Pierre Martel <petem001@...> wrote:
It make total sens but it also mean that I have to connect the private nodes to an analog bridge and this analog bridge to one reflector of the specific digital network , so that would mean at least 4 more analog bridges
So everything you want to do is via asl. The problem you have is since you connected everything directly to the main node you will not be able to connect or disconnect anything on demand.
The way I do it is with multiple private nodes. I have a node for echolink a node for a dmr bridge a node for an xlx bridge. Then I use the startup macro on the main node to connect to all the private nodes on startup. Then if I need to disconnect a mode, link echolink for example, I just disconnect that node and it’s not on the system. Then I can connect it back.
You can do it with the html client by creating elements for connect node x, another for disconnect node x, another for connect node y etc etc. then you can connect and disconnect modes from there. In the TG element you would put someone like “*31999” to connect node x and then *21999 to disonnect node x
Hopefully that makes sense. On Mar 26, 2021, at 18:25, Pierre Martel <petem001@...> wrote:
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way. <dvs.png> I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
ok, got it! I will create a few private nodes and will link them with AB with usrp and MB connected to each network I want to add. will need to check the port carefully.
one question, for the transcoding, do I need multiple instances of the vocoder or it can take multiple connections?
Got ya. Ok. Then leave hh the way it is and yes you will need a private node and ab/mb combos for each other network to connect and disconnect on demand. On Mar 26, 2021, at 19:06, Pierre Martel <petem001@...> wrote:
I want the asl hh and dmr tg to stay connected all the time. But all the other digital networks connect on demand. The 30288 TG is an RF link to HH and ASL and it was designed for that permanently
Only for the dmr bridge. The Hamshack hotline bridge would connect directly to a private node as would echolink. I don’t know how many other connections you have, but the echolink and hh ones would not need analog bridge. On Mar 26, 2021, at 18:53, Pierre Martel <petem001@...> wrote:
It make total sens but it also mean that I have to connect the private nodes to an analog bridge and this analog bridge to one reflector of the specific digital network , so that would mean at least 4 more analog bridges
So everything you want to do is via asl. The problem you have is since you connected everything directly to the main node you will not be able to connect or disconnect anything on demand.
The way I do it is with multiple private nodes. I have a node for echolink a node for a dmr bridge a node for an xlx bridge. Then I use the startup macro on the main node to connect to all the private nodes on startup. Then if I need to disconnect a mode, link echolink for example, I just disconnect that node and it’s not on the system. Then I can connect it back.
You can do it with the html client by creating elements for connect node x, another for disconnect node x, another for connect node y etc etc. then you can connect and disconnect modes from there. In the TG element you would put someone like “*31999” to connect node x and then *21999 to disonnect node x
Hopefully that makes sense. On Mar 26, 2021, at 18:25, Pierre Martel <petem001@...> wrote:
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way. <dvs.png> I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
You ar eprobably going to want multiple instances of the transcoder. I have tried it in the past with just the one md380emu and it crashed and burned from trying to transcode between dmr, analog and ysfn at the same time. I had to reload the vps at least once a month till I separated the YSF out to a second vps.
On Mar 26, 2021, at 19:44, Pierre Martel <petem001@...> wrote:
ok, got it! I will create a few private nodes and will link them with AB with usrp and MB connected to each network I want to add. will need to check the port carefully.
one question, for the transcoding, do I need multiple instances of the vocoder or it can take multiple connections?
Got ya. Ok. Then leave hh the way it is and yes you will need a private node and ab/mb combos for each other network to connect and disconnect on demand. On Mar 26, 2021, at 19:06, Pierre Martel <petem001@...> wrote:
I want the asl hh and dmr tg to stay connected all the time. But all the other digital networks connect on demand. The 30288 TG is an RF link to HH and ASL and it was designed for that permanently
Only for the dmr bridge. The Hamshack hotline bridge would connect directly to a private node as would echolink. I don’t know how many other connections you have, but the echolink and hh ones would not need analog bridge. On Mar 26, 2021, at 18:53, Pierre Martel <petem001@...> wrote:
It make total sens but it also mean that I have to connect the private nodes to an analog bridge and this analog bridge to one reflector of the specific digital network , so that would mean at least 4 more analog bridges
So everything you want to do is via asl. The problem you have is since you connected everything directly to the main node you will not be able to connect or disconnect anything on demand.
The way I do it is with multiple private nodes. I have a node for echolink a node for a dmr bridge a node for an xlx bridge. Then I use the startup macro on the main node to connect to all the private nodes on startup. Then if I need to disconnect a mode, link echolink for example, I just disconnect that node and it’s not on the system. Then I can connect it back.
You can do it with the html client by creating elements for connect node x, another for disconnect node x, another for connect node y etc etc. then you can connect and disconnect modes from there. In the TG element you would put someone like “*31999” to connect node x and then *21999 to disonnect node x
Hopefully that makes sense. On Mar 26, 2021, at 18:25, Pierre Martel <petem001@...> wrote:
Sorry I could be asking an obvious question. But since I was not following the whole development of the dvs suite I am kind of lost right now I have a vps that is running ASL that I installed from the repo, I also installed dvs server from the repo. And used the script to connect to BM Canada on a fix TG and I have Hamshack Hotline . I have what it seem all the other network ready but I have no Idea how I can connect them on demand or even in a fix way. <dvs.png> I tried to find how to connect the html client or the android app but I just cant find the proper way. I have no private node on the systeme. the node is reporting to ASL. Should I add a private node? Thanks Pierre VE2PF
|
|
|
Steve N4IRS
You can run multiple instance of MD380-emu on one VPS. One per data
stream.
Steve
On 3/26/21 9:24 PM, Jeff Lehman, N8ACL
via groups.io wrote:
You ar eprobably going to want multiple instances of the
transcoder. I have tried it in the past with just the one md380emu
and it crashed and burned from trying to transcode between dmr,
analog and ysfn at the same time. I had to reload the vps at least
once a month till I separated the YSF out to a second vps.
ok, got it! I will create a few private nodes
and will link them with AB with usrp and MB connected to
each network I want to add. will need to check the port
carefully.
one question, for the transcoding, do I need multiple
instances of the vocoder or it can take multiple
connections?
Got ya. Ok. Then leave hh the way it is
and yes you will need a private node and ab/mb combos
for each other network to connect and disconnect on
demand.
On Mar 26, 2021, at 19:06,
Pierre Martel <petem001@...>
wrote:
I want the asl hh and dmr tg to stay
connected all the time. But all the other digital
networks connect on demand. The 30288 TG is an RF
link to HH and ASL and it was designed for that
permanently
Only for the dmr bridge. The
Hamshack hotline bridge would connect directly
to a private node as would echolink. I don’t
know how many other connections you have, but
the echolink and hh ones would not need analog
bridge.
On Mar 26, 2021, at
18:53, Pierre Martel <petem001@...>
wrote:
It make total sens but it
also mean that I have to connect the
private nodes to an analog bridge and
this analog bridge to one reflector of
the specific digital network , so that
would mean at least 4 more analog
bridges
So everything you want
to do is via asl. The problem you
have is since you connected
everything directly to the main node
you will not be able to connect or
disconnect anything on demand.
The way I do it is with
multiple private nodes. I have a
node for echolink a node for a dmr
bridge a node for an xlx bridge.
Then I use the startup macro on
the main node to connect to all
the private nodes on startup. Then
if I need to disconnect a mode,
link echolink for example, I just
disconnect that node and it’s not
on the system. Then I can connect
it back.
You can do it with the html
client by creating elements for
connect node x, another for
disconnect node x, another for
connect node y etc etc. then you
can connect and disconnect modes
from there. In the TG element you
would put someone like “*31999” to
connect node x and then *21999 to
disonnect node x
Hopefully that makes sense.
On Mar
26, 2021, at 18:25, Pierre
Martel <petem001@...>
wrote:
Sorry I could be
asking an obvious question.
But since I was not following
the whole development of the
dvs suite I am kind of lost
right now
I have a vps that is running
ASL that I installed from the
repo, I also installed dvs
server from the repo. And used
the script to connect to BM
Canada on a fix TG and I have
Hamshack Hotline . I have what
it seem all the other network
ready but I have no Idea how I
can connect them on demand or
even in a fix way.
<dvs.png>
I tried to find how to connect
the html client or the android
app but I just cant find the
proper way. I have no private
node on the systeme. the node
is reporting to ASL.
Should I add a private node?
Thanks
Pierre
VE2PF
|
|
|
got it, Thank Steve. I have 2 time 4 ambe chips, usb board that I want to try to use. So maybe it would be easier for me to setup the server at my place and connect to the vps as the fix spot on the internet for a few things and have private nodes at home that connect to the multiple networks. anyways sending a connect command to a local or remote node is the same. I could a;so use the new numbering system that give out 10 node number from one node request and put all the nodes online as links to the different networks for other ham to use.
Will work on that this week end.
Le ven. 26 mars 2021 à 21:27, Steve N4IRS < szingman@...> a écrit :
You can run multiple instance of MD380-emu on one VPS. One per data
stream.
Steve
On 3/26/21 9:24 PM, Jeff Lehman, N8ACL
via groups.io wrote:
You ar eprobably going to want multiple instances of the
transcoder. I have tried it in the past with just the one md380emu
and it crashed and burned from trying to transcode between dmr,
analog and ysfn at the same time. I had to reload the vps at least
once a month till I separated the YSF out to a second vps.
ok, got it! I will create a few private nodes
and will link them with AB with usrp and MB connected to
each network I want to add. will need to check the port
carefully.
one question, for the transcoding, do I need multiple
instances of the vocoder or it can take multiple
connections?
Got ya. Ok. Then leave hh the way it is
and yes you will need a private node and ab/mb combos
for each other network to connect and disconnect on
demand.
On Mar 26, 2021, at 19:06,
Pierre Martel <petem001@...>
wrote:
I want the asl hh and dmr tg to stay
connected all the time. But all the other digital
networks connect on demand. The 30288 TG is an RF
link to HH and ASL and it was designed for that
permanently
Only for the dmr bridge. The
Hamshack hotline bridge would connect directly
to a private node as would echolink. I don’t
know how many other connections you have, but
the echolink and hh ones would not need analog
bridge.
On Mar 26, 2021, at
18:53, Pierre Martel <petem001@...>
wrote:
It make total sens but it
also mean that I have to connect the
private nodes to an analog bridge and
this analog bridge to one reflector of
the specific digital network , so that
would mean at least 4 more analog
bridges
So everything you want
to do is via asl. The problem you
have is since you connected
everything directly to the main node
you will not be able to connect or
disconnect anything on demand.
The way I do it is with
multiple private nodes. I have a
node for echolink a node for a dmr
bridge a node for an xlx bridge.
Then I use the startup macro on
the main node to connect to all
the private nodes on startup. Then
if I need to disconnect a mode,
link echolink for example, I just
disconnect that node and it’s not
on the system. Then I can connect
it back.
You can do it with the html
client by creating elements for
connect node x, another for
disconnect node x, another for
connect node y etc etc. then you
can connect and disconnect modes
from there. In the TG element you
would put someone like “*31999” to
connect node x and then *21999 to
disonnect node x
Hopefully that makes sense.
On Mar
26, 2021, at 18:25, Pierre
Martel <petem001@...>
wrote:
Sorry I could be
asking an obvious question.
But since I was not following
the whole development of the
dvs suite I am kind of lost
right now
I have a vps that is running
ASL that I installed from the
repo, I also installed dvs
server from the repo. And used
the script to connect to BM
Canada on a fix TG and I have
Hamshack Hotline . I have what
it seem all the other network
ready but I have no Idea how I
can connect them on demand or
even in a fix way.
<dvs.png>
I tried to find how to connect
the html client or the android
app but I just cant find the
proper way. I have no private
node on the systeme. the node
is reporting to ASL.
Should I add a private node?
Thanks
Pierre
VE2PF
|
|
|
