Date
1 - 9 of 9
Adding XLX Reflector
|
David - W9DWH
Our local System Fusion repeater runs a Wires-X room. Rather than set up a YSF or FCS reflector it was decided an XLX reflector would be used instead. That way it's Wires-X room can also be accessed via DMR, D-Star, etc.
Setting up the XLX reflector on Pi-Star was a breeze. However, since XLX is not native to DVS I'm trying to figure out how to add it. I've done some research, here in the group, but a lot of info I've found so far is outdated now. I also keep seeing info that references Brandmeister and I don't need any connectivity directly from XLX to BM. Therefore I'm a little lost at the moment. Is there an updated tutorial anywhere that will lead me through adding XLX connectivity only?
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
David,
toggle quoted messageShow quoted text
See <https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md> See the bottom of the page. Steve N4IRS
On 4/10/21 4:05 PM, David - W9DWH via
groups.io wrote:
Our local System Fusion repeater runs a Wires-X room. Rather than set up a YSF or FCS reflector it was decided an XLX reflector would be used instead. That way it's Wires-X room can also be accessed via DMR, D-Star, etc.
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
David - W9DWH
Thanks. I have a few more questions though:
1.) Where I do I enter this information? 2.) Do I add it using the GUI or do I need to add it manually? 3.) How do I select the module (we're using "A") ?
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
1: in MMDVM_Bridge.ini
toggle quoted messageShow quoted text
2: manually 3: I believe module A would be 4001
On 4/11/21 4:09 PM, David - W9DWH via
groups.io wrote:
Thanks. I have a few more questions though:
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
David - W9DWH
It's still not making sense to me yet. I followed the directions:
[DMR Network]
Enable=1
Address=74.91.114.19
Port=62031
Jitter=360
Local=62032
Password=*********
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4009
Slot1=0
Slot2=1
Debug=0 Needless to say it's not working. First of all there's nothing I can see that is pointing it to the XLX reflector I want to use (217 Module A). Brandmeister stopped using reflectors so I'm not sure if this is the problem or not.
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
It's still not making sense to me yet. I followed the directions: --
Doug Gooden troytrojan@...
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
David - W9DWH
Thanks Doug. This is not working for me either though. Before I go any further do I need to choose between Brandmeister, and the XLX reflector, since there is already an instance of [DMR Network] which already contains the BM setup?
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
Not enough information for me. I thought you were tying to do one thing. Do you see it logging into the XLX?
Thanks Doug. This is not working for me either though. Before I go any further do I need to choose between Brandmeister, and the XLX reflector, since there is already an instance of [DMR Network] which already contains the BM setup? --
Doug Gooden troytrojan@...
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
David - W9DWH
Sorry Doug. I've been running Pi-Star for many a moon but I'm still fairly new to DVS. What I would like to try to do is add XLX functionality, without losing any of the other modes, like can be done with Pi-Star. If necessary I would settle for the just the one XLX reflector, that we use locally, rather than all of them. I'm also willing to give up the D-Star mode, to accommodate it if necessary. When I tried the example you provided I did not see it register on the XLX217 dashboard.
|
|||||||||||||||||||||||||
|
|