channel.c:3051 ast_request: No channel type registered
|
Paul on6dp
Hi guys,
I'm trying to install ASL as Hub but I have the following error messge [May 14 00:07:39] WARNING[12643]: channel.c:3051 ast_request: No channel type registered for 'dahdi' rpt:Sorry unable to obtain Rx channel In module.conf I have : load => chan_dahdi.so ; In rpt.conf I have : [50941] rxchannel = dahdi/pseudo ;rxchannel = USRP/127.0.0.1:34001:32001 ; Use the USRP channel driver. Must be enabled in modules.conf ; 127.0.0.1 = IP of the target application ; 34001 = UDP port the target application is listening on ; 32001 = UDP port ASL is listening on duplex = 1 ; 0 = Half duplex with no telemetry tones or hang time. Ah, but Allison STILL talks! hangtime = 0 ; squelch tail hang time 0 althangtime = 0 ; longer squelch tail hang time 0 holdofftelem = 1 ; Hold off all telemetry when signal is present on receiver or from connected nodes ; except when an ID needs to be done and there is a signal coming from a connected node. telemdefault = 1 ; 0 = telemetry output off. Don't send Allison to DMR !!!!!!!!!!!!!!!!! Trust me. telemdynamic = 0 ; 0 = disallow users to change the local telemetry setting with a COP command, linktolink = yes ; disables forcing physical half-duplex operation of main repeater while ; still keeping half-duplex semantics (optional) nounkeyct = 1 ; Set to a 1 to eliminate courtesy tones and associated delays. totime = 180000 ; transmit time-out time (in ms) (optional, default 3 minutes 180000 ms) idrecording = |ie ON6DP ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |ie ON6DP ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129 The Dahdi vers is DKMS Where is the mistake ? Anybody can help Me ?
|
|
|
|
Is this a new install? What version of AllStar? Did you make any
changes?
toggle quoted messageShow quoted text
On 5/13/21 6:12 PM, Paul on6dp wrote:
Hi guys,
|
|
|
|
Paul on6dp
HI , Yes it’s a new install of allstar link but on the server (VPS on Cloud) there is already a DVSwitch Server (http://dvs.freedmr.be ). The VPS by OVH is under Debian 10 Buster and CPU AMD64 I mean I have a problem with dahdi. It’s with DKMS
Here is the ASL-Build.sh that I was using to build the ASL
And when I’m trying to make apt upgrade -y I have that error
Any idea to solve that ?
73 Paul, ON6DP
De : main@DVSwitch.groups.io <main@DVSwitch.groups.io> De la part de Steve N4IRS
Is this a new install? What version of AllStar? Did you make any changes? On 5/13/21 6:12 PM, Paul on6dp wrote:
|
|
|
|
Since you already have DVSwitch Server installed, I can't speak to
that script, but I would just:
toggle quoted messageShow quoted text
Clean out everything done by the script and then: apt install allstar. Steve N4IRS
On 5/14/2021 3:57 AM, Paul on6dp wrote:
|
|
|
