Date
1 - 18 of 18
Disconnection after 45 seconds
|
Greg Goddard <greggoddard@...>
Can I anybody help when connected after 45 seconds my signal will cut-out Come anybody help me with this problem please 2E0LXC greg goddard Sent from my Samsung Galaxy smartphone.
|
|
|
|
Greg,
toggle quoted messageShow quoted text
We need more info. What program(s) are you running? What are you connected to? Some log files would help. Steve N4IRS
On 8/21/19 7:46 PM, Greg Goddard via
Groups.Io wrote:
|
|
|
|
Greg Goddard <greggoddard@...>
Connected to DV switch on my mobile Every 45 seconds A node number can be heard and the signal cuts out then comes back in again Sent from my Samsung Galaxy smartphone.
-------- Original message -------- From: Steve N4IRS <szingman@...> Date: 22/08/2019 00:49 (GMT+00:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] Disconnection after 45 seconds We need more info. What program(s) are you running? What are you connected to? Some log files would help. Steve N4IRS On 8/21/19 7:46 PM, Greg Goddard via
Groups.Io wrote:
|
|
|
|
Greg Goddard <greggoddard@...>
Connected to All-Star Sent from my Samsung Galaxy smartphone.
-------- Original message -------- From: Steve N4IRS <szingman@...> Date: 22/08/2019 00:49 (GMT+00:00) To: main@DVSwitch.groups.io Subject: Re: [DVSwitch] Disconnection after 45 seconds We need more info. What program(s) are you running? What are you connected to? Some log files would help. Steve N4IRS On 8/21/19 7:46 PM, Greg Goddard via
Groups.Io wrote:
|
|
|
|
We are going to need to see logs. We need to see your ASL log, your
Analog_Bridge log and MMDVM_Bridge log.
toggle quoted messageShow quoted text
The log sections need to be from the same time frame. When you transmit on ASl, when the SAME traffic passes to Analog_Bridge and when that traffic passes to MMDVM_Bridge.
On 8/21/19 8:09 PM, Greg Goddard via
Groups.Io wrote:
|
|
|
|
Hello All,
I am having a similar problem, where after about 2 mins or so the DVSwitch mobile app running on an Android mobile device just hangs up on all modes, Eg NXDN, P25, YSF etc, whilst connected on a cellular connection, when a push the "Register" button I get USRP :REG OK notification again, and the connection continues for about another 2 minutes or so, unless I am in a QSO where the app does not hang up. If I run the same android device and app on my home wifi connection I don't get disconnected. I've also tried connecting using another phone's wifi hotspot on a cellular connection and get the same result . The equipment I am using is a RPi 3b only running DVSwitch2 with updated scripts and binaries connected thru my homes 5G wifi connection to my router the 1 away to a stable 90Gbs cable connection. However, on IAX2 connection to an Allstar node I remain connected. Any suggestions VK4SED Mike
|
|
|
|
Mike,
toggle quoted messageShow quoted text
Check to verify battery optimization is off for the DVSM app on your Android device. Steve N4IRS
On 11/25/19 7:21 PM, VK4SED wrote:
Hello All,
|
|
|
|
Thanks Steve.
I didn’t see that control on the network radio. I’ll dig a bit deeper. 73’s Mike VK4SED
|
|
|
|
I have a Inrico T320.
toggle quoted messageShow quoted text
Settings/Battery Top right hand corner 3 vertical dots Battery Optimization Steve
On 11/26/19 9:56 PM, VK4SED wrote:
Thanks Steve.
|
|
|
|
Mike,
toggle quoted messageShow quoted text
Just a FYI. I'm not sure the issue is battery optimization, but it needs to be checked. Mike and I spoke about this today and it MAY be a issue with Network Address Translation. Analog_Bridge pings DVSM when in NAT mode (single UDP port) This is done so that NAT does not time out. The issue may be that we are not pinging often enough. Mike has a double NAT install running. We hope that the double NAT may help us recreate the issue. 73, Steve N4IRS
On 11/26/19 9:56 PM, VK4SED wrote:
Thanks Steve.
|
|
|
|
Hi Steve
Just an update. Thru trial and error I discovered the problem is Telstra my internet provider which apparently is blocking Port 46001 on the cellist network. Because I Changed the SIM card to another provider and boom! No registration issue DVSM stays connected . So now I need to change the port in dvswitch. 73’s Mike
|
|
|
|
Mike,
Great news. Thanks for the update.
Steve
Sent via smoke signal (AT&T)
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of VK4SED <vk4sed@...>
Sent: Sunday, December 1, 2019 10:47:18 PM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: Re: [DVSwitch] Disconnection after 45 seconds Hi Steve
Just an update. Thru trial and error I discovered the problem is Telstra my internet provider which apparently is blocking Port 46001 on the cellist network. Because I Changed the SIM card to another provider and boom! No registration . So now I need to change the port in dvswitch. 73’s Mike
|
|
|
|
iz7exi@...
identical problem, with mobile connection, after 30 seconds the register button lights up, I have to reconnect to continue for another 30 seconds, I use a radio network with postemobile data sim, a vpn could solve the problem ??
thank you
|
|
|
|
Yes,
toggle quoted messageShow quoted text
A VPN is worth a try.
On 1/7/2022 12:25 PM, iz7exi via
groups.io wrote:
|
|
|
|
iz7exi@...
thanks Steve
|
|
|
|
iz7exi@...
Hi Steve, with openvpn installed on debian everything works perfectly
|
|
|
|
45sec disconnect on ASL can be caused by "remote base" setting and hamvoip version.
https://community.allstarlink.org/t/iaxrpt-disconnects-after-45-seconds/18082/24 "The problem with node 49562 is that it’s setup as a “remote base” in the allstarlink portal. Here is the nodelist info: 49562=radio@...:4549/49562,74.132.115.111,y The original remote base mode isn’t supported in HamVoIP, since no IAX2 link messages get sent when enabled as a “remote base.” HamVoIP requires link message (aka: heartbeats) at least every 45 seconds. The simple solution is to just turn off the “remote base” mode by setting: “Is node a remote base station” to “No” in the allstarlink.org 1, “Node settings” section list. 73, David K4FXC"
|
|
|
|
Just a comment,
toggle quoted messageShow quoted text
It looks to me like HamVoIP is diverging away from normal AllStarLink operation. I'm becoming concerned. I'm not saying the changes don't have value. It's just becoming a problem dealing with all the things that need to be changed to work properly with HV: requirecalltoken (The next version of DVSwitch Mobile will deal with this. Among quite a few added features) phonesendlinks propagate_dtmf propagate_phonedtmf remote_dtmf_allowed COP, 25 removed COP, 26 removed Remote base For DVSwitch, 73, N4IRS
On 5/9/2022 6:31 PM, Kk6qms wrote:
45sec disconnect on ASL can be caused by "remote base" setting and hamvoip version.
|
|
|