DMR to AllStar Bridge


Steve N4IRS
 

What hardware?
What OS? OS version?
What did you install?
dmrlink? dmrutils?
from apt-get install dvswitch?

On 05/18/2018 06:58 PM, Roselito de los Reyes wrote:
after installation I get these in /opt directory

Analog_Bridge, dmrlink, dmr_utils

I don't even see MMDVM_Bridge

Am I doing something wrong?

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:56 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMR to AllStar Bridge
 
If you installed the dvswitch package or Analog_Bridge it should have installed md380-emu.

On 05/18/2018 06:54 PM, Roselito de los Reyes wrote:
Hey Steve,

Thanks for all you do. I tried installing DVSwitch on a pi with ASL. How do I get the MD380-EMU into the install and get it running like Russel has it setup?

73,

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:51 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMR to AllStar Bridge
 
From the report, it's transcoding from Analog to DMR but not from DMR to Analog.

On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.










Steve N4IRS
 

Correction md380-emu is installed with the dvswitch package. You can also install with apt-get install md380-emu

On 05/18/2018 06:54 PM, Roselito de los Reyes wrote:
Hey Steve,

Thanks for all you do. I tried installing DVSwitch on a pi with ASL. How do I get the MD380-EMU into the install and get it running like Russel has it setup?

73,

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:51 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMR to AllStar Bridge
 
From the report, it's transcoding from Analog to DMR but not from DMR to Analog.

On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.









Lito - WI6Y
 

after installation I get these in /opt directory

Analog_Bridge, dmrlink, dmr_utils

I don't even see MMDVM_Bridge

Am I doing something wrong?


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:56 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMR to AllStar Bridge
 
If you installed the dvswitch package or Analog_Bridge it should have installed md380-emu.

On 05/18/2018 06:54 PM, Roselito de los Reyes wrote:
Hey Steve,

Thanks for all you do. I tried installing DVSwitch on a pi with ASL. How do I get the MD380-EMU into the install and get it running like Russel has it setup?

73,

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:51 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMR to AllStar Bridge
 
From the report, it's transcoding from Analog to DMR but not from DMR to Analog.

On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.









Steve N4IRS
 

If you installed the dvswitch package or Analog_Bridge it should have installed md380-emu.

On 05/18/2018 06:54 PM, Roselito de los Reyes wrote:
Hey Steve,

Thanks for all you do. I tried installing DVSwitch on a pi with ASL. How do I get the MD380-EMU into the install and get it running like Russel has it setup?

73,

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:51 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMR to AllStar Bridge
 
From the report, it's transcoding from Analog to DMR but not from DMR to Analog.

On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.









Lito - WI6Y
 

Hey Steve,

Thanks for all you do. I tried installing DVSwitch on a pi with ASL. How do I get the MD380-EMU into the install and get it running like Russel has it setup?

73,

Lito


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, May 18, 2018 3:51 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMR to AllStar Bridge
 
From the report, it's transcoding from Analog to DMR but not from DMR to Analog.

On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.








Steve N4IRS
 

it's using the MD380-emu

On 05/18/2018 06:53 PM, perlguy9@... wrote:
Right, but you can’t have a dongle in the cloud, so how is it doing the AMBE encoding / decoding?
On Fri, May 18, 2018 at 6:52 PM Steve N4IRS <szingman@...> wrote:
From the report, it's transcoding from Analog to DMR but not from DMR to Analog.


On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.









perlguy9@...
 

Right, but you can’t have a dongle in the cloud, so how is it doing the AMBE encoding / decoding?

On Fri, May 18, 2018 at 6:52 PM Steve N4IRS <szingman@...> wrote:
From the report, it's transcoding from Analog to DMR but not from DMR to Analog.


On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.








Steve N4IRS
 

From the report, it's transcoding from Analog to DMR but not from DMR to Analog.

On 05/18/2018 06:49 PM, perlguy9@... wrote:
In this case, since you’re running in the cloud, what is doing the vocoder transcoding?
On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.








perlguy9@...
 

In this case, since you’re running in the cloud, what is doing the vocoder transcoding?

On Fri, May 18, 2018 at 6:46 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.







Steve N4IRS
 

I'll log into it when I can. Prob tomorrow morning.

Steve

On 05/18/2018 06:46 PM, Russell Thomas, KV4S wrote:
I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.








 

I"m back home and just gave it a try again. It's not working from DMR to AllStar.

Here is a screenshot from DMR hoseline. My audio is going out over the hoseline network fine but not on the allstar node.
AllStar to DMR comes over fine.

On Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...> wrote:
It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.







Steve N4IRS
 

It looks like it is working to me.


On 5/18/2018 9:12 AM, Russell Thomas, KV4S wrote:
after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.







 

after minor tweaks and no success, attaching logs.

I'm lost now.

On Thu, May 17, 2018 at 11:01 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.






 

I have the self care account now and i set the talk group static.

Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.

On Thu, May 17, 2018 at 10:11 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.






 

That was it!

Right after i connected I heard Allstar on the DMR TG. 

I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?

New logs attached.

On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...> wrote:
You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.






Steve N4IRS
 

You need to enable the usrp channel driver in modules.conf.

On 05/17/2018 10:46 PM, Russell Thomas, KV4S wrote:
hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.






 

hey, it's doing this again (screenshot attached)
is it because i rebooted?
is this the DAHDI again?

On Thu, May 17, 2018 at 9:19 PM Russell Thomas, KV4S <russelljthomas@...> wrote:
good catch. I did not. it is now.

On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.





 

good catch. I did not. it is now.


On Thu, May 17, 2018 at 9:17 PM Steve N4IRS <szingman@...> wrote:
Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.





Steve N4IRS
 

Did you comment out the psuedo channel driver?

On 05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.





 

i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP

However, I have not setup the selfcare account for the club. I'll work on that and report back.

On Thu, May 17, 2018 at 8:57 PM Steve N4IRS <szingman@...> wrote:
Have you setup the usrp channel driver and pointed it at analog_bridge?
Have you setup the selfcare account for the DMR connection and created a static TG?

On 05/17/2018 09:46 PM, Russell Thomas, KV4S wrote:
hmm can anyone check these logs and see if they can tell what's wrong?

On Thu, May 17, 2018 at 6:17 PM Steve N4IRS <szingman@...> wrote:
systemctl start analog_bridge
systemctl start mmdvm_bridge

logs are at /var/log/mmdvm

On 05/17/2018 07:12 PM, Russell Thomas, KV4S wrote:
I believe I was able to make the appropriate edits to the ini files in opt.

How do you start the DVSwitch?
How do you view the logs I've seen folks post here?

On Wed, May 16, 2018 at 11:19 AM Steve N4IRS <szingman@...> wrote:
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...

On 5/16/2018 12:16 PM, Russell Thomas, KV4S wrote:
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.

I installed the ASL and the DVSwitch. 

All appears to have installed correctly this time.

What are my next steps. I tried some searches but I can't find where the .ini files are located.

On Tue, May 15, 2018 at 8:06 PM Alec J Wasserman <alec.wasserman@...> wrote:
i followed the instructions on here   https://wiki.allstarlink.org/wiki/ASL_FAQ  and I made Allstar work on Google Cloud last night  Wasnt too hard.