Topics

DVMEGA


N4UPC - Scott
 

If I follow the "DVSwitch Installation and User Guide v1.61.pdf" and put DVSwitch on a RasPi 4 (4GB) can I use the DVstick30 on the RasPi?  Also, what's the best way to also get AllStar on the RasPi?  Thanks!


Steve N4IRS
 

Scott,
Yes, you can install DVSwitch Server with the DVstick30 on the Raspberry Pi 4 by following the DVSwitch Installation and User Guide v1.61 document.
Adding AllStar becomes a problem on that system. ASL 1.01 does not run on a Raspberry Pi 4. I can tell you that AllStar for the Raspberry Pi 4 is being worked on.

Steve N4IRS

On 1/1/21 8:57 AM, N4UPC - Scott via groups.io wrote:
If I follow the "DVSwitch Installation and User Guide v1.61.pdf" and put DVSwitch on a RasPi 4 (4GB) can I use the DVstick30 on the RasPi?  Also, what's the best way to also get AllStar on the RasPi?  Thanks!


N4UPC - Scott
 

Thanks Steve!  Would it be better to install the HamVOIP version of AllStar and then install the DVSwitch software?


Steve N4IRS
 

I was going to answer that but held off. No, you can not install DVSwitch Server (easily) on HAMVOIP. For now, your best bet is either 2 Pi or a RPi3.

On 1/1/21 9:55 AM, N4UPC - Scott via groups.io wrote:
Thanks Steve!  Would it be better to install the HamVOIP version of AllStar and then install the DVSwitch software?


N4UPC - Scott
 

Okay Steve. Thanks again.  I've got a RasPi 3A+ that I can try.  What is the best way to go about this?


Steve N4IRS
 

Setup with the ASL 1.01 image. Follow the readme to pin the kernel and headers. Once you have ASL configured the way you want it, you can add DVSwitch Server with:
As root:
cd /tmp
wget http://dvswitch.org/buster
chmod +x buster
./buster
apt-get install dvswitch-server

Follow this to setup DVSwitch Server <http://www.dvswitch.org/DVSwitch_install.pdf>

Steve N4IRS

On 1/1/21 10:57 AM, N4UPC - Scott via groups.io wrote:
Okay Steve. Thanks again.  I've got a RasPi 3A+ that I can try.  What is the best way to go about this?


Steve N4IRS
 

Usually, that is because you have MMDVM_Bridge also running in the background.
systemctl stop mmdvm_bridge

On 1/1/21 6:16 PM, N4UPC - Scott via groups.io wrote:
I'm missing something ... I just have no idea what! Grrrrrr!  From the MMDVM_Bridge what running in foreground:

E: 2021-01-01 23:13:25.685 Cannot bind the UDP address, err: 98
F: 2021-01-01 23:13:25.685 DMR, Can not open listener port 31103


Mike KB8JNM
 

I thing the beginning of the file is missing a  "  <?php     "

On 1/1/2021 10:49 PM, N4UPC - Scott via groups.io wrote:
I'm getting this from the dashboard and can't figure out what I'm missing. PHP is installed.

DVSwitch Dashboard

     RX Monitor   ';} ?>
'; echo ''; echo ' '."\n"; echo ''."\n"; echo ''; echo '
'."\n"; echo ''."\n"; echo '
'."\n"; include 'include/lh.php'; echo '
'."\n"; echo "
\n"; echo '
'."\n"; include 'include/localtx.php'; echo '
'."\n"; echo ''; ?> '."\n"; echo ''."\n"; echo '
'."\n"; include 'include/system.php'; // Basic System Info echo '
'."\n"; echo '
'."\n"; ?> DVSwitch Dashboard "2020") {$cdate="2020-".date("Y");} echo $cdate; ?>
Dashboard based on Pi-Star Dashboard, © Andy Taylor (MW0MWZ) and adapted to DVSwitch by SP2ONG


N4UPC - Scott
 

You were correct Steve. Can some see if they can connect to me (3162356). Thanks!


Steve N4IRS
 

TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!


N4UPC - Scott
 

Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!



Steve N4IRS
 

I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!




N4UPC - Scott
 

I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!





Steve N4IRS
 

I'll be there in a few.


On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!




Steve N4IRS
 

standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!






N4UPC - Scott
 

I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!







Steve N4IRS
 

green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!








N4UPC - Scott
 

Okay, so what should I check with regard to the green/red thing?

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!









N4UPC - Scott
 

The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!









Steve N4IRS
 

OK,
Not that this matters for your issue. Since you are using the stick:
[DV3000]
; address = 127.0.0.1
; rxPort = 2460  
address = /dev/ttyUSB0    
baud = 460800      
serial = true

set your DV3000 section like above.

For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log

On 1/2/21 7:02 AM, N4UPC - Scott via groups.io wrote:
The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!