Date
1 - 20 of 76
DVMEGA
|
If I follow the "DVSwitch Installation and User Guide v1.61.pdf" and put DVSwitch on a RasPi 4 (4GB) can I use the DVstick30 on the RasPi? Also, what's the best way to also get AllStar on the RasPi? Thanks!
|
|
|
|
Scott,
toggle quoted messageShow quoted text
Yes, you can install DVSwitch Server with the DVstick30 on the Raspberry Pi 4 by following the DVSwitch Installation and User Guide v1.61 document. Adding AllStar becomes a problem on that system. ASL 1.01 does not run on a Raspberry Pi 4. I can tell you that AllStar for the Raspberry Pi 4 is being worked on. Steve N4IRS
On 1/1/21 8:57 AM, N4UPC - Scott via
groups.io wrote:
If I follow the "DVSwitch Installation and User Guide v1.61.pdf" and put DVSwitch on a RasPi 4 (4GB) can I use the DVstick30 on the RasPi? Also, what's the best way to also get AllStar on the RasPi? Thanks!
|
|
|
|
Thanks Steve! Would it be better to install the HamVOIP version of AllStar and then install the DVSwitch software?
|
|
|
|
I was going to answer that but held off. No, you can not install
DVSwitch Server (easily) on HAMVOIP. For now, your best bet is
either 2 Pi or a RPi3.
toggle quoted messageShow quoted text
On 1/1/21 9:55 AM, N4UPC - Scott via
groups.io wrote:
Thanks Steve! Would it be better to install the HamVOIP version of AllStar and then install the DVSwitch software?
|
|
|
|
Okay Steve. Thanks again. I've got a RasPi 3A+ that I can try. What is the best way to go about this?
|
|
|
|
Setup with the ASL 1.01 image. Follow the readme to pin the kernel
and headers. Once you have ASL configured the way you want it, you
can add DVSwitch Server with:
toggle quoted messageShow quoted text
As root: cd /tmp wget http://dvswitch.org/buster chmod +x buster ./buster apt-get install dvswitch-server Follow this to setup DVSwitch Server <http://www.dvswitch.org/DVSwitch_install.pdf> Steve N4IRS
On 1/1/21 10:57 AM, N4UPC - Scott via
groups.io wrote:
Okay Steve. Thanks again. I've got a RasPi 3A+ that I can try. What is the best way to go about this?
|
|
|
|
Usually, that is because you have MMDVM_Bridge also running in the
background.
toggle quoted messageShow quoted text
systemctl stop mmdvm_bridge
On 1/1/21 6:16 PM, N4UPC - Scott via
groups.io wrote:
I'm missing something ... I just have no idea what! Grrrrrr! From the MMDVM_Bridge what running in foreground:
|
|
|
|
I thing the beginning of the file is missing a " <?php "
On 1/1/2021 10:49 PM, N4UPC - Scott via
groups.io wrote:
I'm getting this from the dashboard and can't figure out what I'm missing. PHP is installed.
|
|
|
|
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!
|
|
|
|
TG 3162356?
toggle quoted messageShow quoted text
On 1/2/21 5:26 AM, N4UPC - Scott via
groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!
|
|
|
|
Yes, I'm using my DMR ID as a talkgroup. 73, Scott N4UPC
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?
|
|
|
|
I'm calling you.
toggle quoted messageShow quoted text
On 1/2/21 6:15 AM, N4UPC - Scott via
groups.io wrote:
|
|
|
|
I can see you on the dashboard. The RX light keeps going from green to red. I'm not hearing anything. 73, Scott N4UPC
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.
|
|
|
|
I'll be there in a few.
toggle quoted messageShow quoted text
On 1/2/21 6:15 AM, N4UPC - Scott via
groups.io wrote:
|
|
|
|
standby
toggle quoted messageShow quoted text
On 1/2/21 6:28 AM, N4UPC - Scott via
groups.io wrote:
|
|
|
|
I saw you transmitting that time, but no audio. 73, Scott N4UPC
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby
|
|
|
|
green to red not good. Red bad.
toggle quoted messageShow quoted text
On 1/2/21 6:51 AM, N4UPC - Scott via
groups.io wrote:
|
|
|
|
Okay, so what should I check with regard to the green/red thing? 73, Scott N4UPC
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.
|
|
|
|
The only thing that is not standard is that I'm using a DVMEGA stick. Here is the section that pertains to: [DV3000] address = 127.0.0.1 rxPort = 2460 address = /dev/ttyUSB0 baud = 460800 serial = true 73, Scott N4UPC
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.
|
|
|
|
OK,
toggle quoted messageShow quoted text
Not that this matters for your issue. Since you are using the stick: [DV3000] ; address = 127.0.0.1 ; rxPort = 2460 address = /dev/ttyUSB0 baud = 460800 serial = true set your DV3000 section like above. For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log
On 1/2/21 7:02 AM, N4UPC - Scott via
groups.io wrote:
|
|
|
RX Monitor ';} ?>