Greetings,
I would not get dummyrepeater and ASL to work right. It quit sending traffic to ASL. But ASL can send traffic to DSTAR. So I changed my path. I wanted more capabilities.
So, I have DVswitch -server installed. I have ASL TX and RX from dvswitch. I am not running a local ircddbgateway. I all ready have ircddbgateway running my repeater. So I just created a 2nd repeater in ircddbgateway. the port is on gateway address for that port is on 20025. Here is the config I have for that section.
[D-Star Network]
Enable=1
GatewayAddress=10.0.2.169
GatewayPort=20025
LocalPort=20010
Debug=1
I can not get ircddbgateway to see the connection. So if I run MMDVM_Bridge at the CLI. Here is what I get. What is wrong? I an very confused. I want to get DMR Local 9 linked to DSTAR and use ASL as the connect. But I have to get DSTAR working first.
I: 2021-01-15 02:08:39.414 MMDVM_Bridge:
I: 2021-01-15 02:08:39.414 Portions Copyright (C) 2018, 2019, 2020 DVSwitch, INAD.
I: 2021-01-15 02:08:39.414 Hacks by Mike N4IRR and Steve N4IRS
I: 2021-01-15 02:08:39.414 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2021-01-15 02:08:39.414 This software is for use on amateur radio networks only,
I: 2021-01-15 02:08:39.414 it is to be used for educational purposes only. Its use on
I: 2021-01-15 02:08:39.415 commercial networks is strictly prohibited.
I: 2021-01-15 02:08:39.415 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2021-01-15 02:08:39.415 MMDVM_Bridge-20201129_V1.6.2 is starting
M: 2021-01-15 02:08:39.415 Built 08:55:21 Dec 1 2020 (GitID #89f8998)
I: 2021-01-15 02:08:39.415 General Parameters
I: 2021-01-15 02:08:39.415 Callsign: KD8TUZ
I: 2021-01-15 02:08:39.415 Id: 113969811
I: 2021-01-15 02:08:39.415 Duplex: no
I: 2021-01-15 02:08:39.415 Timeout: 180s
I: 2021-01-15 02:08:39.415 D-Star: enabled
I: 2021-01-15 02:08:39.415 DMR: disabled
I: 2021-01-15 02:08:39.415 YSF: disabled
I: 2021-01-15 02:08:39.415 P25: disabled
I: 2021-01-15 02:08:39.415 NXDN: disabled
I: 2021-01-15 02:08:39.415 Modem Parameters
I: 2021-01-15 02:08:39.415 Port: /dev/null
I: 2021-01-15 02:08:39.415 RX Invert: no
I: 2021-01-15 02:08:39.415 TX Invert: no
I: 2021-01-15 02:08:39.415 PTT Invert: no
I: 2021-01-15 02:08:39.415 TX Delay: 100ms
I: 2021-01-15 02:08:39.415 RX Offset: 0Hz
I: 2021-01-15 02:08:39.415 TX Offset: 0Hz
I: 2021-01-15 02:08:39.415 RX DC Offset: 0
I: 2021-01-15 02:08:39.415 TX DC Offset: 0
I: 2021-01-15 02:08:39.415 RF Level: 100.0%
I: 2021-01-15 02:08:39.415 DMR Delay: 0 (0.0ms)
I: 2021-01-15 02:08:39.415 RX Level: 50.0%
I: 2021-01-15 02:08:39.415 CW Id TX Level: 50.0%
I: 2021-01-15 02:08:39.415 D-Star TX Level: 50.0%
I: 2021-01-15 02:08:39.415 DMR TX Level: 50.0%
I: 2021-01-15 02:08:39.415 YSF TX Level: 50.0%
I: 2021-01-15 02:08:39.415 P25 TX Level: 50.0%
I: 2021-01-15 02:08:39.415 NXDN TX Level: 50.0%
I: 2021-01-15 02:08:39.415 RX Frequency: 442650000Hz (442650000Hz)
I: 2021-01-15 02:08:39.415 TX Frequency: 447650000Hz (447650000Hz)
M: 2021-01-15 02:08:39.415 Opening the MMDVM
I: 2021-01-15 02:08:39.415 Display Parameters
I: 2021-01-15 02:08:39.415 Type:
I: 2021-01-15 02:08:39.415 D-Star Network Parameters
I: 2021-01-15 02:08:39.415 Gateway Address: 10.0.2.169
I: 2021-01-15 02:08:39.415 Gateway Port: 20025
I: 2021-01-15 02:08:39.415 Local Port: 20010
I: 2021-01-15 02:08:39.415 Mode Hang: 3s
M: 2021-01-15 02:08:39.415 Opening D-Star network connection
I: 2021-01-15 02:08:39.415 RSSI
I: 2021-01-15 02:08:39.415 Mapping File: /dev/null
I: 2021-01-15 02:08:39.415 Loaded 0 RSSI data mapping points from /dev/null
I: 2021-01-15 02:08:39.415 DMR Id Lookups
I: 2021-01-15 02:08:39.415 File: /var/lib/mmdvm/DMRIds.dat
I: 2021-01-15 02:08:39.415 Reload: 24 hours
I: 2021-01-15 02:08:39.606 Loaded 183688 Ids to the DMR callsign lookup table
I: 2021-01-15 02:08:39.606 D-Star RF Parameters
I: 2021-01-15 02:08:39.606 Module: D
I: 2021-01-15 02:08:39.606 Self Only: no
I: 2021-01-15 02:08:39.606 Ack Reply: yes
I: 2021-01-15 02:08:39.606 Ack Time: 750ms
I: 2021-01-15 02:08:39.606 Error Reply: yes
I: 2021-01-15 02:08:39.606 Remote Gateway: no
I: 2021-01-15 02:08:39.606 Mode Hang: 10s
M: 2021-01-15 02:08:39.606 D-Star, Opening INI file: DVSwitch.ini
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] address -> 127.0.0.1
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] txPort -> 32100
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] rxPort -> 32103
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] fallbackID -> 113968
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] exportTG -> 1977
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] slot -> 2
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] RemotePort -> 20010
M: 2021-01-15 02:08:39.606 D-Star, Setting [DSTAR] message -> %location %description
M: 2021-01-15 02:08:39.607 D-Star, Transmitting on 127.0.0.1:32100, and listening on port 32103. Result = 1
M: 2021-01-15 02:08:39.607 MMDVM_Bridge-20201129_V1.6.2 is running
I: 2021-01-15 02:08:39.607 Started the DMR Id lookup reload thread
M: 2021-01-15 02:08:55.265 D-Star, TX state = ON
I: 2021-01-15 02:08:55.265 D-Star, Begin TX: src=1139698 rpt=113969811 dst=2 slot=2 cc=1 metadata=KD8TUZ
M: 2021-01-15 02:08:56.425 D-Star, TX state = OFF
The DSTAR Begin section to me is not right. It looks like it is in DMR format. Everything I find online is DMR not DSTAR. The other thing that is weird. The target is TG not a dstar layout. I want to use one of my starnets. but I can not get that either.
Thanks
