Fusion node lists and tune string
|
G4WXN@...
What is the format of the tune string for YSF. Into a YSF node list. I wanted to link up to CQ_UK_1 2 and 3, but these don't show in the default YSF node list. Thanks in advance
|
|
|
|
Derek,
toggle quoted messageShow quoted text
You can connect to YSF reflectors and FCS rooms. You can not connect to wires-x rooms. Same as you can not connect to a wires-x room from a hotspot. Steve N4IRS
On 4/20/2021 5:45 AM,
G4WXN@... wrote:
|
|
|
|
G4WXN@...
Thanks for the reply.
Doing some trawling of previous posts, as I understand it, to connect to a YSF reflector I use the dvs tune string with the reflector ID number and add an 8 infront. So CQ-UK 1 is 41729, so my tune string should be /dvswitch.sh tune 841729 have I got that right? -- Derek G4WXN
|
|
|
|
Yes, if it's a YSF reflector, precede with an 8. If it's a FCS room
precede with a 9.
toggle quoted messageShow quoted text
Make sure you are in the proper mode: ./dvswitch.sh mode YSF ./dvswitch.sh tune 841729
On 4/20/2021 12:18 PM,
G4WXN@... wrote:
Thanks for the reply.
|
|
|
|
G4WXN@...
Yes mode is YSF.
Although the tune command appears to work, it's not connecting as far as I can tell. I have attached the YSFGW ini file and the log file. My guess I am doing something stupid -- Derek G4WXN
|
|
|
|
I don't think it will matter, but add this to bottom of
YSFGateway.ini
toggle quoted messageShow quoted text
[Remote Commands] Enable=1 Port=6073 restart YSFGateway. retest Steve
On 4/20/2021 1:04 PM,
G4WXN@... wrote:
Yes mode is YSF.
|
|
|
|
G4WXN@...
I see this line in the YSFGW log
toggle quoted messageShow quoted text
The ID of this repeater is 00000
is there any significance to this?
On Tue, Apr 20, 2021 at 06:12 PM, Steve N4IRS wrote:
[Remote Commands] --
Derek G4WXN
|
|
|
|
G4WXN@...
Added those lines to YSFGW and rebooted, but sadly no change. Using the reflector number gets me nowhere. However I have succeeded in connecting to Hubnet, if I use the IP address and port number, but the reflector number doesn't work. Think I must be missing something.
|
|
|
|
Show me the YSFGateway log when you dial 857727
toggle quoted messageShow quoted text
On 4/20/2021 2:39 PM,
G4WXN@... wrote:
|
|
|
|
G4WXN@...
As always thanks for your help with this.
toggle quoted messageShow quoted text
Log file attached. I have tried this from the dialer and from a script I call to use YSF, the output results are the same
On Tue, Apr 20, 2021 at 07:51 PM, Steve N4IRS wrote:
857727 --
Derek G4WXN
|
|
|
|
I do not see an attempt to dial 857727
toggle quoted messageShow quoted text
Please include your DVSwitch.ini Steve
On 4/21/2021 9:39 AM,
G4WXN@... wrote:
As always thanks for your help with this.
|
|
|
|
G4WXN@...
File attached.
This may sound like a stupid question, but it just occurred to me- Do I need to register somewhere for YSF? -- Derek G4WXN
|
|
|
|
No you do not.
toggle quoted messageShow quoted text
Is your system up to date? You don't have any of the remote control ports in your DVSwitch.ini Please show the output of: /opt/MMDVM_Bridge/dvswitch version all Steve
On 4/21/2021 9:56 AM,
G4WXN@... wrote:
File attached.
|
|
|
|
G4WXN@...
Output of command Below.
toggle quoted messageShow quoted text
/opt/MMDVM_Bridge/dvswitch.sh version all
dvswitch.sh version 1.6.1
Analog_Bridge version 1.6.1
MMDVM_Bridge version 20210223_V1.6.3 git #bb741c3
P25Gateway version 20200824
NXDNGateway version 20200824
YSFGateway version 20200908
On Wed, Apr 21, 2021 at 03:00 PM, Steve N4IRS wrote:
/opt/MMDVM_Bridge/dvswitch version all --
Derek G4WXN
|
|
|
|
OK, So, in the interest of safety add these to your DVSwitch.ini
toggle quoted messageShow quoted text
[DSTAR] RemotePort = 54321 ; Port to send Gateway commands to [NXDN] RemotePort = 6075 ; Port to send Gateway commands to [P25] RemotePort = 6074 ; Port to send Gateway commands to [YSF] RemotePort = 6073 ; Port to send Gateway commands to Then restart MMDVM_Bridge and retest. Steve
On 4/21/2021 10:16 AM,
G4WXN@... wrote:
Output of command Below.
|
|
|
|
G4WXN@...
I added the remote port details to each stanza in DVSwitch.ini. I assumed that was right.
|
|
|
|
Did you restart mmdvm_bridge?
toggle quoted messageShow quoted text
On 4/21/2021 2:11 PM,
G4WXN@... wrote:
|
|
|
|
G4WXN@...
Rebooted the Pi
-- Derek G4WXN
|
|
|
|
You now have the remote control ports defined. MB should be sending
commands to YSFGateway. SHow the AB and MB logs when you issue tune
command. Make sure you issue a mode YSF first.
toggle quoted messageShow quoted text
|
|
|
|
G4WXN@...
I have attached another YSFGateway log file, and added some notes to it.
Linking appears to work if the dialer has IP address and port, this I do from a customised YSF node list by a long press on B.
If I enter the dialer string 857727, as you can see in the log nothing happens.
-- Derek G4WXN
|
|
|