IPSC to IPSC question?


jay@...
 

Hello,

I'm looking to connect my Trbo repeater to a "IPSC Gateway?" and that gateway connect to a c-bridge. Doing this for a "man in the middle" way of managing the talk groups etc. Is this doable and what would i use, IPSC_Gateway only?

Thanks!
73,


Steve N4IRS
 

I did this type of thing with confbridge quite a while ago. You may also be able to use proxy.
Maybe someone else can chime in.

73, Steve N4IRS


On 4/24/2018 2:23 PM, jay@... wrote:
Hello,

I'm looking to connect my Trbo repeater to a "IPSC Gateway?" and that gateway connect to a c-bridge. Doing this for a "man in the middle" way of managing the talk groups etc. Is this doable and what would i use, IPSC_Gateway only?

Thanks!
73,


Cort N0MJS <n0mjs@...>
 

confbridge.py in DMRlink was intended to do exactly this, and to be a stand-alone “call router”. It’s been in production service as part of the K0USY Group “regional” network since it was first written… of course, that’s also why I wrote it :)

On Apr 24, 2018, at 2:53 PM, Steve N4IRS <szingman@...> wrote:

I did this type of thing with confbridge quite a while ago. You may also be able to use proxy.
Maybe someone else can chime in.

73, Steve N4IRS


On 4/24/2018 2:23 PM, jay@... wrote:
Hello,

I'm looking to connect my Trbo repeater to a "IPSC Gateway?" and that gateway connect to a c-bridge. Doing this for a "man in the middle" way of managing the talk groups etc. Is this doable and what would i use, IPSC_Gateway only?

Thanks!
73,


Cort Buffington
785-865-7206


jay@...
 

Awesome. thanks for the reply. So here is my next question,

So in order to run software diagnostics and other software the repeater needs to be in MASTER mode not Peer. Is there a way to have it in MASTER mode, Have confbridge connect to the repeater as a peer and also have confbridge connect out to the cbridge and route the traffic through to the repeater?

;)

73,


jay@...
 

Any my next question will be how can I do the above with BM instead of the cbridge? ;)

Thanks!!!


Steve N4IRS
 

You can connect to BM with dmrlink, but it requires intervention from the BM admins. You can use HB_Bridge and IPSC_Bridge to build a connection to BM that you control.

On 04/24/2018 06:37 PM, jay@... wrote:
Any my next question will be how can I do the above with BM instead of the cbridge? ;)

Thanks!!!


Steve N4IRS
 

Short answer, yes. dmrlink can be a peer to a Motorola repeater as a Master.

On 04/24/2018 06:29 PM, jay@... wrote:
Awesome. thanks for the reply. So here is my next question,

So in order to run software diagnostics and other software the repeater needs to be in MASTER mode not Peer. Is there a way to have it in MASTER mode, Have confbridge connect to the repeater as a peer and also have confbridge connect out to the cbridge and route the traffic through to the repeater?

;)

73,


jay@...
 

So what, it would be Repeater > dmrlink > HB_Bridge >IPSC_Bridge > dmrlink > BM ?


Steve N4IRS
 

BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink


On 04/24/2018 06:44 PM, jay@... wrote:
So what, it would be Repeater > dmrlink > HB_Bridge >IPSC_Bridge > dmrlink > BM ?


jay@...
 

On Tue, Apr 24, 2018 at 03:58 pm, Steve N4IRS wrote:
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink
so,
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink <---> MASTER Repeater


Steve N4IRS
 

yes

On 04/24/2018 07:01 PM, jay@... wrote:
On Tue, Apr 24, 2018 at 03:58 pm, Steve N4IRS wrote:
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink
so,
BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink <---> MASTER Repeater


jay@...
 

Ok,

Seems like a big feat but well giver  er a try lol

Thanks!!
73,


Steve N4IRS
 

take it in small pieces.

On 04/24/2018 07:03 PM, jay@... wrote:
Ok,

Seems like a big feat but well giver  er a try lol

Thanks!!
73,


jay@...
 

Do you happen to have a sample config for HB_Bridge to connect to BM 3108?

Just not seeing it yet...


jay@...
 

So I edited the hblink.cfg and added BM in the repeater section, it logs into BM successfully but then i get an MSTNAK from BM and the connection drops...

Whats this about? lol


jay@...
 

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


Corey Dean N3FE <n3fe@...>
 

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


jay@...
 

What would I put if I'm using a motorola repeater?




Cheers,
Jay

On Apr 24, 2018, at 10:49 PM, Corey Dean N3FE <n3fe@...> wrote:

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


Steve N4IRS
 

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:
PORT: 54001
MASTER_IP: 172.16.1.1
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: W1ABC
RADIO_ID: 312000
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 1
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
OPTIONS:

What did you change from above?

On 04/24/2018 10:53 PM, Jamie R. Cid wrote:
What would I put if I'm using a motorola repeater?




Cheers,
Jay

On Apr 24, 2018, at 10:49 PM, Corey Dean N3FE <n3fe@...> wrote:

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??


Jamie R. Cid <jay@...>
 

Dough. I changed password to passw0rd. 




Cheers,
Jay

On Apr 25, 2018, at 5:24 AM, Steve N4IRS <szingman@...> wrote:

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:
PORT: 54001
MASTER_IP: 172.16.1.1
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: W1ABC
RADIO_ID: 312000
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 1
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_HBlink
GROUP_HANGTIME: 5
OPTIONS:

What did you change from above?

On 04/24/2018 10:53 PM, Jamie R. Cid wrote:
What would I put if I'm using a motorola repeater?




Cheers,
Jay

On Apr 24, 2018, at 10:49 PM, Corey Dean N3FE <n3fe@...> wrote:

Did you add in the package Id and the software I’d?  It should connect right up of you did.

Corey. N3FE


On Apr 24, 2018, at 10:44 PM, jay@... wrote:

Same as this issue,

NC110 HBlink-HB_Bridge # ./hblink.py
DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged
INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2017-06-20 23:07:26,777 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:26,778 (REPEATER-1) Sending login request to master 91.121.101.163:62031
DEBUG 2017-06-20 23:07:26,779 CLIENT instance created: REPEATER-1, <__main__.HBSYSTEM instance at 0xb6851a6c>
INFO 2017-06-20 23:07:26,803 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1721087229
INFO 2017-06-20 23:07:26,834 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:26,835 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:26,856 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:31,779 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:31,780 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:31,808 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1776249007
INFO 2017-06-20 23:07:31,836 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:31,837 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:31,865 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:36,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:36,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:36,812 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1330675359
INFO 2017-06-20 23:07:36,843 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:36,844 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:36,869 (REPEATER-1) MSTNAK Received
DEBUG 2017-06-20 23:07:41,782 (REPEATER-1) Client maintenance loop started
INFO 2017-06-20 23:07:41,783 (REPEATER-1) Sending login request to master 91.121.101.163:62031
INFO 2017-06-20 23:07:41,814 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1297483179
INFO 2017-06-20 23:07:41,846 (REPEATER-1) Repeater Authentication Accepted
INFO 2017-06-20 23:07:41,847 (REPEATER-1) Repeater Configuration Sent
WARNING 2017-06-20 23:07:41,874 (REPEATER-1) MSTNAK Received

You mentioned:

Peter:
SOFTWARE_ID: 20170529
PACKAGE_ID: MMDVM_HBlink
??