Topics

MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge


David
 

Hi Ernie

Thank a lot ,I will create new topic for ask 


David
 





Hi Adrian

thanks for you infomation ,yes i use XLX with transcoding (one AMBE 3003 with ambed)
my goal is cross link XLX DMR <-> BM TG as my understand the lnk should

XLX(Dstar)<->transcode<->XLX(DMR)<->MMDVM_Bridge_XLX<->MMDVM_Bridge_BM<->BM TG(static TG gruop)

my problem both MMDBM_bridge can see frame from XLX or BM but only one way audio BM -> XLX (unstable still some audo drop

XLX -> BM is audio is not work .but can see the frame on both MB log (see below)

XLX side :

M: 2019-11-10 02:43:22.258 DMR Slot 2, received network voice header from BV3UN to TG 9
M: 2019-11-10 02:43:22.263 DMR Slot 2, received network end of voice transmission, 0.1 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-10 02:43:35.926 DMR Slot 2, received network voice header from BV3UN to TG 9
M: 2019-11-10 02:43:38.450 DMR Slot 2, received network end of voice transmission, 2.9 seconds, 12% packet loss, BER: 0.0%
M: 2019-11-10 02:43:41.062 DMR Slot 2, received network voice header from BV3UN to TG 9
M: 2019-11-10 02:43:45.311 DMR Slot 2, received network end of voice transmission, 4.4 seconds, 1% packet loss, BER: 0.0%
M: 2019-11-10 02:52:22.389 DMR, TX state = ON
I: 2019-11-10 02:52:22.389 DMR, Begin TX: src=4601096 rpt=0 dst=91 slot=2 cc=0 metadata=4601096
M: 2019-11-10 02:52:23.850 DMR, TX state = OFF, DMR frame count was 26 frames
M: 2019-11-10 02:52:29.990 DMR, TX state = ON
I: 2019-11-10 02:52:29.990 DMR, Begin TX: src=2345451 rpt=0 dst=91 slot=2 cc=0 metadata=M0ZEL
M: 2019-11-10 02:52:31.366 DMR, TX state = OFF, DMR frame count was 26 frames

BM side

M: 2019-11-10 02:43:22.262 DMR, TX state = ON
I: 2019-11-10 02:43:22.262 DMR, Begin TX: src=4660018 rpt=0 dst=9 slot=2 cc=0 metadata=BV3UN
M: 2019-11-10 02:43:22.268 DMR, TX state = OFF, DMR frame count was 2 frames
M: 2019-11-10 02:43:35.931 DMR, TX state = ON
I: 2019-11-10 02:43:35.931 DMR, Begin TX: src=4660018 rpt=0 dst=9 slot=2 cc=0 metadata=BV3UN
M: 2019-11-10 02:43:38.456 DMR, TX state = OFF, DMR frame count was 43 frames
M: 2019-11-10 02:43:41.064 DMR, TX state = ON
I: 2019-11-10 02:43:41.064 DMR, Begin TX: src=4660018 rpt=0 dst=9 slot=2 cc=0 metadata=BV3UN
M: 2019-11-10 02:43:45.311 DMR, TX state = OFF, DMR frame count was 72 frames

it seems TX site sill in BG TG 9 group not my wanted (46600)
在 2019年11月10日 星期日 上午8:49:24 [GMT+8], Adrian<vk4tux@...> 寫道:


ircddbgateway 2015 will work with XLX reflectors with no issue, if the
entry is in either DCS | DPLUS or DExtra host files, and very easily
manually added.


You can use ;




for reference or use,

which are correct propriety system [USTRUST] source with XLX supplement
for vacant number slots.

These are easy to manually edit for the XLX system you wish to add,
using DCS | REF| XRF prefix instead of XLX.

For latest ircddbgateway using XLX link feature, the link protocol is DCS.

However the system uses the XLX DMR database list to use a pure currect
list

of XLX reflectors and this is the main reason for it's addition to XLX,
I requested and worked with Geoff on this last year.


Config ;

xlxEnabled=1

which should already be in place.


If you are connecting to a XLX with transcoding, it is better to connect
with DMR direct now from MMDVM_Bridge,

rather than connecting via D-Star.

vk4tux