Need some advice YSF bridge to DMR


Komkit Listisard
 

Hello,  I am looking to bridge my YSFReflector bridge to my friend DMR TG52007.  Not sure what information I need to provide here to get started.

I have YSFReflector up and running and I have DVSwitch server up and running on the side.  Followed some instruction but got confuse at:

in DVSWitch config

Not quite understand and not really what port number or IP to put here.

[YSF]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 35100                  ; Port to send AMBE TLV frames to (export)
rxPort = 35103                  ; Port to listen on (import)
txWidePort = 35105              ; Port to send IMBE TLV frames to for YSFw (export)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 52007                ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 6073               ; Port to send Gateway commands to

Could someone please kindly guide me through the process?

73, Kit W3KIT
 


Eric-K6KWB
 

You only need one instance of MB and its look loke this:
BM TG 52007<->MB<->Ysf Ref

https://dvswitch.groups.io/g/main/wiki/6097

MMDVM_Bridge.ini
[DMR Network]
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=your password
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=>>>>> your ysf ip or dns
GatewayPort=42000 >>>>your ysf port
Debug=0

DVSwitch.ini

[DMR]

address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 35100                  ; Port to send AMBE TLV frames to (export)
rxPort = 35103                  ; Port to listen on (import)
slot = 2                        ; Export slot
exportTG =               ; Which TG to export 
hangTimerInFrames = 0 ; Use 50 for 3 seconds of hang time (3000 / 60) 
talkerAlias =            ; Get callsign location and description from MMDVM_Bridge.ini

 

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 35103             ; Port to send AMBE TLV frames to (export)

RXPort = 35100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 52007           ; Which TG to export

Slot = 2                          ; Export slot

best and 73


Komkit Listisard
 

Thank you Eric, got it.  That is where I got lost.  Just crossed the ports and off I went.   

Thank you kindly,
Kit W3KIT