Date
1 - 9 of 9
new install working but cannot get BM to TGIF to work
|
Ive created the additional .ini files in MB directory:
MMDVM_Bridge_TGIF MMDVM_Bridge_BM i then created the .sh files in AB directory: TGIF_chng.sh BM_chng.sh I also edited the file dvsm.macro and added: 13 = /opt/MMDVM_Bridge/BM_chng.sh 14 = /opt/MMDVM_Bridge/TGIF_chng.sh i read that dvsm.ini has to be edited but there isn't a file that I can find named that I keep getting this in the AB log... I: 2020-05-18 18:46:07.074 Tune macro: *14 will invoke "/opt/MMDVM_Bridge/TGIF_chng.sh" I: 2020-05-18 18:46:07.080 Macro result was 32256 been reading all the messages but still cannot figure out after several hours :( please help
|
|
|
|
John,
toggle quoted messageShow quoted text
Below you said you created the .sh files in the AB directory. But your macros are trying to run them out of the MB directory. See below.
On 5/18/20 3:06 PM, John K1IF via
groups.io wrote:
Ive created the additional .ini files in MB directory:
|
|
|
|
Steve, Thank you for the quick reply..
I changed the dvsm.macro to : 13 = /opt/Analog_Bridge/BM_chng.sh 14 = /opt/Analog_Bridge/TGIF_chng.sh It is still on Brandmeister network here is the AB log now: I: 2020-05-18 19:38:58.192 Tune macro: *14 will invoke "/opt/Analog_Bridge/TGIF_chng.sh" I: 2020-05-18 19:38:58.203 Macro result was 32256 I: 2020-05-18 19:39:20.066 USRP reset server IP address to 169.254.42.42:46001 I: 2020-05-18 19:39:20.066 USRP unregister client I: 2020-05-18 19:39:22.420 USRP server ip change from 169.254.42.42 to new ip:port 192.168.1.7:46001 I: 2020-05-18 19:39:23.404 INFO packet sent to USRP client I: 2020-05-18 19:39:23.404 codec=slin I: 2020-05-18 19:39:23.743 USRP packet type: USRP_TYPE_TEXT (K1IF) -> 3100128 I: 2020-05-18 19:39:23.743 USRP packet type: USRP_TYPE_TEXT (K1IF) -> 3100128 I: 2020-05-18 19:41:18.582 txTg=: 4000 I: 2020-05-18 19:41:21.943 Begin TX: src=4000 rpt=0 dst=3100128 slot=2 cc=128 call=4000 I: 2020-05-18 19:41:32.159 txTg=: 91 I: 2020-05-18 19:41:32.589 Begin TX: src=3020845 rpt=0 dst=91 slot=2 cc=0 call=VE3RIA I: 2020-05-18 19:42:03.855 Begin TX: src=3142386 rpt=0 dst=91 slot=2 cc=0 call=KC3PEX I: 2020-05-18 19:42:14.050 txTg=: 4000 I: 2020-05-18 19:42:17.441 Begin TX: src=4000 rpt=0 dst=3100128 slot=2 cc=128 call=4000 Thanks
|
|
|
|
What happens when you run /opt/Analog_Bridge/BM_chng.sh from the
command line?
toggle quoted messageShow quoted text
On 5/18/20 3:49 PM, John K1IF via
groups.io wrote:
Steve, Thank you for the quick reply..
|
|
|
|
permission denied when ran from #
|
|
|
|
I changed permissions to 777 on each .sh and now getting...
AB LOG I: 2020-05-18 20:23:26.901 Tune macro: *14 will invoke "/opt/Analog_Bridge/TGIF_chng.sh" I: 2020-05-18 20:23:27.263 rxport=: 30000 M: 2020-05-18 20:23:27.264 TLV rx socket reopened for 127.0.0.1:30000 I: 2020-05-18 20:23:28.549 MESSAGE packet sent to USRP client: Setting mode to DMR I: 2020-05-18 20:23:28.621 ambeMode = DMR, size = 72 M: 2020-05-18 20:23:28.621 Connecting to DV3000 hardware...... M: 2020-05-18 20:23:28.633 Begin DV3000 decode M: 2020-05-18 20:23:28.633 DV3000 latency is currently set to 1 I: 2020-05-18 20:23:28.688 txport=: 31103 I: 2020-05-18 20:23:28.759 rxport=: 31100 E: 2020-05-18 20:23:28.759 Can not bind port 31100, error code = 98 (Address already in use) M: 2020-05-18 20:23:28.759 TLV rx socket reopened for 127.0.0.1:31100 I: 2020-05-18 20:23:31.383 Macro result was 0 I: 2020-05-18 20:24:15.123 txTg=: 4000 M: 2020-05-18 20:24:53.782 TLV tx socket re-opened for 127.0.0.1:415496 M: 2020-05-18 20:24:53.782 PTT on M: 2020-05-18 20:24:56.197 Short transmission, extend hang time by 85 ms M: 2020-05-18 20:24:56.317 PTT off (keyed for 2535 ms) from command line: cp: missing destination file operand after /opt/MMDVM_Bridge/MMDVM_Bridge_TGIF.ini/optMMDVM_Bridge/MMDVM_Bridge.ini
|
|
|
|
went back over everything and found error in my script. it appears to be working now!! HURRY burn image
Thanks for pointing me in correct path Steve ! 73 John
|
|
|
|
Tim Porter
Don't feel bad John I can't get it working either
went back over everything and found error in my script. it appears to be working now!! HURRY burn image
|
|
|
|
John,
toggle quoted messageShow quoted text
Happy to hear you got it working. 73, Steve N4IRS
On 5/18/20 5:14 PM, John K1IF via
groups.io wrote:
went back over everything and found error in my script. it appears to be working now!! HURRY burn image
|
|
|