|
Hi Steve, OK here is what I have been able to achieve, P25Gateway runs fine, I can then start MMDVM_Bridge and it connects to the BM Master successfully, I can TX on both the P25 radio and the DMR radio on different repeaters and see my calls come up on the screen output. I then start up Analog_Bridge_P25.ini and do the same test and again can see myself coming up on the screen output but no audio between them. Now when I startup Analog_Bridge_DMR.ini and do the same test I can see myself come up on the screen output then I get the following error, only on that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out on Encode" depending on the direction of the data and still no audio in either direction, but I can get the DMR repeater to TX "sometimes" when PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is on a server in the cloud so there are no USB Dongles connected, I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
Ian,
Did you miss installing on your new box, or have you got the wrong ports setup for the MD380emu?
73,
Peter
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ian Tulley <ian@...>
Sent: 02 January 2019 07:40
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] P25<-->DMR issue "Still"
Hi Steve, OK here is what I have been able to achieve, P25Gateway runs fine, I can then start MMDVM_Bridge and it connects to the BM Master successfully, I can TX on both the P25 radio and the DMR radio on different repeaters and see my calls come up on
the screen output. I then start up Analog_Bridge_P25.ini and do the same test and again can see myself coming up on the screen output but no audio between them. Now when I startup Analog_Bridge_DMR.ini and do the same test I can see myself come up on the screen
output then I get the following error, only on that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out on Encode" depending on the direction of the data and still no audio in either direction, but I can get the DMR repeater to TX "sometimes" when
PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is on a server in the cloud so there are no USB Dongles connected, I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
Steve N4IRS
So,
it sounds like P25 is working all the way to Analog_Bridge. It
also sounds like you have a problem with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
toggle quoted messageShow quoted text
On 1/2/19 2:40 AM, Ian Tulley wrote:
Hi Steve, OK here is what I have been able to achieve, P25Gateway
runs fine, I can then start MMDVM_Bridge and it connects to the BM
Master successfully, I can TX on both the P25 radio and the DMR
radio on different repeaters and see my calls come up on the
screen output. I then start up Analog_Bridge_P25.ini and do the
same test and again can see myself coming up on the screen output
but no audio between them. Now when I startup
Analog_Bridge_DMR.ini and do the same test I can see myself come
up on the screen output then I get the following error, only on
that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out
on Encode" depending on the direction of the data and still no
audio in either direction, but I can get the DMR repeater to TX
"sometimes" when PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is
on a server in the cloud so there are no USB Dongles connected,
I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
Hi Steve, if I do systemctl status md380-emu it shows it as running, if I TX from the P25 radio, I get very broken audio out of the DMR, if I TX from the DMR Radio I just get very harsh hash from the P25 Radio, that was with the USRP Audio settings as per default. I am assuming I will need to adjust those on both of the Analog_Bridge ini files ??
I have not done any as yet this morning, but will be looking at it hopefully in the next hour.
------------------
Regards Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...> wrote:
So,
it sounds like P25 is working all the way to Analog_Bridge. It
also sounds like you have a problem with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian Tulley wrote:
Hi Steve, OK here is what I have been able to achieve, P25Gateway
runs fine, I can then start MMDVM_Bridge and it connects to the BM
Master successfully, I can TX on both the P25 radio and the DMR
radio on different repeaters and see my calls come up on the
screen output. I then start up Analog_Bridge_P25.ini and do the
same test and again can see myself coming up on the screen output
but no audio between them. Now when I startup
Analog_Bridge_DMR.ini and do the same test I can see myself come
up on the screen output then I get the following error, only on
that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out
on Encode" depending on the direction of the data and still no
audio in either direction, but I can get the DMR repeater to TX
"sometimes" when PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is
on a server in the cloud so there are no USB Dongles connected,
I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
Steve N4IRS
Set the USRP audio settings in BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or down .9,.8,etc.
toggle quoted messageShow quoted text
On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as
running, if I TX from the P25 radio, I get very broken audio out
of the DMR, if I TX from the DMR Radio I just get very harsh hash
from the P25 Radio, that was with the USRP Audio settings as per
default. I am assuming I will need to adjust those on both of the
Analog_Bridge ini files ??
I have not done any as yet this morning, but will be
looking at it hopefully in the next hour.
------------------
Regards
Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is working all the way to
Analog_Bridge. It also sounds like you have a problem
with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian
Tulley wrote:
Hi Steve, OK here is what I have been able to achieve,
P25Gateway runs fine, I can then start MMDVM_Bridge
and it connects to the BM Master successfully, I can
TX on both the P25 radio and the DMR radio on
different repeaters and see my calls come up on the
screen output. I then start up Analog_Bridge_P25.ini
and do the same test and again can see myself coming
up on the screen output but no audio between them. Now
when I startup Analog_Bridge_DMR.ini and do the same
test I can see myself come up on the screen output
then I get the following error, only on that Stanza,
"Emulator Timed out on Decode" or "Emulator Timed out
on Encode" depending on the direction of the data and
still no audio in either direction, but I can get the
DMR repeater to TX "sometimes" when PTT from the P25
radio but no audio.
I'm not sure where to look for this one, please
remember this is on a server in the cloud so there are
no USB Dongles connected, I'm only using the software
decoder.
Regards
Ian (VK2HK)
|
|
|
Thanks Steve, will give that a try soon.
------------------
Regards Ian (VK2HK)
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...> wrote:
Set the USRP audio settings in BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or down .9,.8,etc.
On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as
running, if I TX from the P25 radio, I get very broken audio out
of the DMR, if I TX from the DMR Radio I just get very harsh hash
from the P25 Radio, that was with the USRP Audio settings as per
default. I am assuming I will need to adjust those on both of the
Analog_Bridge ini files ??
I have not done any as yet this morning, but will be
looking at it hopefully in the next hour.
------------------
Regards
Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is working all the way to
Analog_Bridge. It also sounds like you have a problem
with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian
Tulley wrote:
Hi Steve, OK here is what I have been able to achieve,
P25Gateway runs fine, I can then start MMDVM_Bridge
and it connects to the BM Master successfully, I can
TX on both the P25 radio and the DMR radio on
different repeaters and see my calls come up on the
screen output. I then start up Analog_Bridge_P25.ini
and do the same test and again can see myself coming
up on the screen output but no audio between them. Now
when I startup Analog_Bridge_DMR.ini and do the same
test I can see myself come up on the screen output
then I get the following error, only on that Stanza,
"Emulator Timed out on Decode" or "Emulator Timed out
on Encode" depending on the direction of the data and
still no audio in either direction, but I can get the
DMR repeater to TX "sometimes" when PTT from the P25
radio but no audio.
I'm not sure where to look for this one, please
remember this is on a server in the cloud so there are
no USB Dongles connected, I'm only using the software
decoder.
Regards
Ian (VK2HK)
|
|
|
OK, still having issues on the audio side, no matter the combination of the Audio Gain etc, it does make some differences but from P25 to DMR you can make out some of the audio but very very broken up, but from DMR to P25 its just garbage.
When I run the Analog_Bridge_P25.ini and TX, this is the last entries I see on the screen so this shows both from DMR to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP listener on 127.0.0.1:34100 I: 2019-01-02 22:58:32.106 Open USRP on 127.0.0.1:32001 M: 2019-01-02 22:58:32.106 Connecting to DV3000 hardware...... W: 2019-01-02 22:58:33.115 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 22:58:33.214 Subscriber IDs loaded: 117848 I: 2019-01-02 22:58:33.215 Default extended metadata <VK2HK> W: 2019-01-02 22:58:33.215 Using software MBE decoder version 1.2.3 W: 2019-01-02 22:58:33.215 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 22:58:33.215 Starting Analog_Bridge --> USRP thread I: 2019-01-02 22:58:33.215 Open UDP listener on 127.0.0.1:34001 I: 2019-01-02 22:58:33.215 Starting USRP --> IPSC_Bridge thread I: 2019-01-02 23:02:56.562 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:02:57.062 PTT on M: 2019-01-02 23:02:59.907 PTT off (keyed for 2845 ms) I: 2019-01-02 23:03:13.110 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open UDP listener on 127.0.0.1:31100 I: 2019-01-02 23:02:38.868 Open USRP on 127.0.0.1:34001 D: 2019-01-02 23:02:38.868 Attempt to init DV3000 in DMR mode M: 2019-01-02 23:02:38.868 Connecting to DV3000 hardware...... W: 2019-01-02 23:02:39.881 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 23:02:39.986 Subscriber IDs loaded: 117848 I: 2019-01-02 23:02:39.987 Default extended metadata <50521891> I: 2019-01-02 23:02:39.987 Connecting to emulator on host 127.0.0.1:2470 W: 2019-01-02 23:02:39.987 Using software MBE decoder version 1.2.3 W: 2019-01-02 23:02:39.987 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 23:02:39.987 Starting Analog_Bridge --> USRP thread I: 2019-01-02 23:02:39.987 Open UDP listener on 127.0.0.1:32001 I: 2019-01-02 23:02:39.987 Starting USRP --> HB_Bridge thread I: 2019-01-02 23:02:56.562 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0 D: 2019-01-02 23:02:59.907 End TX I: 2019-01-02 23:03:13.111 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:03:13.613 PTT on D: 2019-01-02 23:03:18.694 cpu_time_used = 5081, minTxTime = 2000, pttTime = 1546470193613, end = 1546470198694 M: 2019-01-02 23:03:18.694 PTT off (keyed for 5081 ms)
Just making sure that it looks as it should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...> wrote:
Set the USRP audio settings in BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or down .9,.8,etc.
On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as
running, if I TX from the P25 radio, I get very broken audio out
of the DMR, if I TX from the DMR Radio I just get very harsh hash
from the P25 Radio, that was with the USRP Audio settings as per
default. I am assuming I will need to adjust those on both of the
Analog_Bridge ini files ??
I have not done any as yet this morning, but will be
looking at it hopefully in the next hour.
------------------
Regards
Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is working all the way to
Analog_Bridge. It also sounds like you have a problem
with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian
Tulley wrote:
Hi Steve, OK here is what I have been able to achieve,
P25Gateway runs fine, I can then start MMDVM_Bridge
and it connects to the BM Master successfully, I can
TX on both the P25 radio and the DMR radio on
different repeaters and see my calls come up on the
screen output. I then start up Analog_Bridge_P25.ini
and do the same test and again can see myself coming
up on the screen output but no audio between them. Now
when I startup Analog_Bridge_DMR.ini and do the same
test I can see myself come up on the screen output
then I get the following error, only on that Stanza,
"Emulator Timed out on Decode" or "Emulator Timed out
on Encode" depending on the direction of the data and
still no audio in either direction, but I can get the
DMR repeater to TX "sometimes" when PTT from the P25
radio but no audio.
I'm not sure where to look for this one, please
remember this is on a server in the cloud so there are
no USB Dongles connected, I'm only using the software
decoder.
Regards
Ian (VK2HK)
|
|
|
What does your CPU usage look like when the bridge is active?
On Wed, Jan 2, 2019 at 5:08 PM Ian Tulley < ian@...> wrote: OK, still having issues on the audio side, no matter the combination of the Audio Gain etc, it does make some differences but from P25 to DMR you can make out some of the audio but very very broken up, but from DMR to P25 its just garbage.
When I run the Analog_Bridge_P25.ini and TX, this is the last entries I see on the screen so this shows both from DMR to P25 and visa versa.
M: 2019-01-02 22:58:32.106 Connecting to DV3000 hardware...... Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 22:58:33.214 Subscriber IDs loaded: 117848 I: 2019-01-02 22:58:33.215 Default extended metadata <VK2HK> W: 2019-01-02 22:58:33.215 Using software MBE decoder version 1.2.3 W: 2019-01-02 22:58:33.215 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 22:58:33.215 Starting Analog_Bridge --> USRP thread I: 2019-01-02 22:58:33.215 Starting USRP --> IPSC_Bridge thread I: 2019-01-02 23:02:56.562 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:02:57.062 PTT on M: 2019-01-02 23:02:59.907 PTT off (keyed for 2845 ms) I: 2019-01-02 23:03:13.110 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the Analog_Bridge_DMR.ini
D: 2019-01-02 23:02:38.868 Attempt to init DV3000 in DMR mode M: 2019-01-02 23:02:38.868 Connecting to DV3000 hardware...... Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 23:02:39.986 Subscriber IDs loaded: 117848 I: 2019-01-02 23:02:39.987 Default extended metadata <50521891> I: 2019-01-02 23:02:39.987 Connecting to emulator on host 127.0.0.1:2470W: 2019-01-02 23:02:39.987 Using software MBE decoder version 1.2.3 W: 2019-01-02 23:02:39.987 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 23:02:39.987 Starting Analog_Bridge --> USRP thread I: 2019-01-02 23:02:39.987 Starting USRP --> HB_Bridge thread I: 2019-01-02 23:02:56.562 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0 D: 2019-01-02 23:02:59.907 End TX I: 2019-01-02 23:03:13.111 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:03:13.613 PTT on D: 2019-01-02 23:03:18.694 cpu_time_used = 5081, minTxTime = 2000, pttTime = 1546470193613, end = 1546470198694 M: 2019-01-02 23:03:18.694 PTT off (keyed for 5081 ms)
Just making sure that it looks as it should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...> wrote:
Set the USRP audio settings in BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or down .9,.8,etc.
On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as
running, if I TX from the P25 radio, I get very broken audio out
of the DMR, if I TX from the DMR Radio I just get very harsh hash
from the P25 Radio, that was with the USRP Audio settings as per
default. I am assuming I will need to adjust those on both of the
Analog_Bridge ini files ??
I have not done any as yet this morning, but will be
looking at it hopefully in the next hour.
------------------
Regards
Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is working all the way to
Analog_Bridge. It also sounds like you have a problem
with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian
Tulley wrote:
Hi Steve, OK here is what I have been able to achieve,
P25Gateway runs fine, I can then start MMDVM_Bridge
and it connects to the BM Master successfully, I can
TX on both the P25 radio and the DMR radio on
different repeaters and see my calls come up on the
screen output. I then start up Analog_Bridge_P25.ini
and do the same test and again can see myself coming
up on the screen output but no audio between them. Now
when I startup Analog_Bridge_DMR.ini and do the same
test I can see myself come up on the screen output
then I get the following error, only on that Stanza,
"Emulator Timed out on Decode" or "Emulator Timed out
on Encode" depending on the direction of the data and
still no audio in either direction, but I can get the
DMR repeater to TX "sometimes" when PTT from the P25
radio but no audio.
I'm not sure where to look for this one, please
remember this is on a server in the cloud so there are
no USB Dongles connected, I'm only using the software
decoder.
Regards
Ian (VK2HK)
|
|
|
This is running from a VPS and I can see that it is using 2% of it’s processing power when active.
On 3 Jan 2019, at 10:08 am, Ian Tulley < ian@...> wrote:
OK, still having issues on the audio side, no matter the combination of the Audio Gain etc, it does make some differences but from P25 to DMR you can make out some of the audio but very very broken up, but from DMR to P25 its just garbage.
When I run the Analog_Bridge_P25.ini and TX, this is the last entries I see on the screen so this shows both from DMR to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP listener on 127.0.0.1:34100 I: 2019-01-02 22:58:32.106 Open USRP on 127.0.0.1:32001 M: 2019-01-02 22:58:32.106 Connecting to DV3000 hardware...... W: 2019-01-02 22:58:33.115 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 22:58:33.214 Subscriber IDs loaded: 117848 I: 2019-01-02 22:58:33.215 Default extended metadata <VK2HK> W: 2019-01-02 22:58:33.215 Using software MBE decoder version 1.2.3 W: 2019-01-02 22:58:33.215 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 22:58:33.215 Starting Analog_Bridge --> USRP thread I: 2019-01-02 22:58:33.215 Open UDP listener on 127.0.0.1:34001 I: 2019-01-02 22:58:33.215 Starting USRP --> IPSC_Bridge thread I: 2019-01-02 23:02:56.562 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:02:57.062 PTT on M: 2019-01-02 23:02:59.907 PTT off (keyed for 2845 ms) I: 2019-01-02 23:03:13.110 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open UDP listener on 127.0.0.1:31100 I: 2019-01-02 23:02:38.868 Open USRP on 127.0.0.1:34001 D: 2019-01-02 23:02:38.868 Attempt to init DV3000 in DMR mode M: 2019-01-02 23:02:38.868 Connecting to DV3000 hardware...... W: 2019-01-02 23:02:39.881 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 23:02:39.986 Subscriber IDs loaded: 117848 I: 2019-01-02 23:02:39.987 Default extended metadata <50521891> I: 2019-01-02 23:02:39.987 Connecting to emulator on host 127.0.0.1:2470 W: 2019-01-02 23:02:39.987 Using software MBE decoder version 1.2.3 W: 2019-01-02 23:02:39.987 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 23:02:39.987 Starting Analog_Bridge --> USRP thread I: 2019-01-02 23:02:39.987 Open UDP listener on 127.0.0.1:32001 I: 2019-01-02 23:02:39.987 Starting USRP --> HB_Bridge thread I: 2019-01-02 23:02:56.562 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0 D: 2019-01-02 23:02:59.907 End TX I: 2019-01-02 23:03:13.111 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:03:13.613 PTT on D: 2019-01-02 23:03:18.694 cpu_time_used = 5081, minTxTime = 2000, pttTime = 1546470193613, end = 1546470198694 M: 2019-01-02 23:03:18.694 PTT off (keyed for 5081 ms)
Just making sure that it looks as it should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...> wrote:
Set the USRP audio settings in BOTH ini files to: aslAudio = AUDIO_USE_GAIN agcGain = 1.0 dmrAudio = AUDIO_USE_GAIN dmrGain = 1.0 From there you can go up to 1.5,2,etc or down .9,.8,etc. On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as running, if I TX from the P25 radio, I get very broken audio out of the DMR, if I TX from the DMR Radio I just get very harsh hash from the P25 Radio, that was with the USRP Audio settings as per default. I am assuming I will need to adjust those on both of the Analog_Bridge ini files ??
I have not done any as yet this morning, but will be looking at it hopefully in the next hour.
------------------
Regards Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...> wrote:
So,
it sounds like P25 is working all the way to Analog_Bridge. It also sounds like you have a problem with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian Tulley wrote:
Hi Steve, OK here is what I have been able to achieve, P25Gateway runs fine, I can then start MMDVM_Bridge and it connects to the BM Master successfully, I can TX on both the P25 radio and the DMR radio on different repeaters and see my calls come up on the screen output. I then start up Analog_Bridge_P25.ini and do the same test and again can see myself coming up on the screen output but no audio between them. Now when I startup Analog_Bridge_DMR.ini and do the same test I can see myself come up on the screen output then I get the following error, only on that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out on Encode" depending on the direction of the data and still no audio in either direction, but I can get the DMR repeater to TX "sometimes" when PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is on a server in the cloud so there are no USB Dongles connected, I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
Steve N4IRS
Ian,
Please show me your Analog_Bridge.ini for DMR.
Steve
toggle quoted messageShow quoted text
On 1/2/19 6:08 PM, Ian Tulley wrote:
OK, still having issues on the audio side, no matter the
combination of the Audio Gain etc, it does make some differences
but from P25 to DMR you can make out some of the audio but very
very broken up, but from DMR to P25 its just garbage.
When I run the Analog_Bridge_P25.ini and TX, this is
the last entries I see on the screen so this shows both from DMR
to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP listener on
127.0.0.1:34100
I: 2019-01-02 22:58:32.106 Open USRP on
127.0.0.1:32001
M: 2019-01-02 22:58:32.106 Connecting to DV3000
hardware......
W: 2019-01-02 22:58:33.115 DV3000 not found at
127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point
implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to
redistribute it
under certain conditions; see the file ``LICENSE''
for details.
I: 2019-01-02 22:58:33.214 Subscriber IDs loaded:
117848
I: 2019-01-02 22:58:33.215 Default extended
metadata <VK2HK>
W: 2019-01-02 22:58:33.215 Using software MBE
decoder version 1.2.3
W: 2019-01-02 22:58:33.215 Using software OP25
IMBE/AMBE vocoder
I: 2019-01-02 22:58:33.215 Starting Analog_Bridge
--> USRP thread
I: 2019-01-02 22:58:33.215 Open UDP listener on
127.0.0.1:34001
I: 2019-01-02 22:58:33.215 Starting USRP -->
IPSC_Bridge thread
I: 2019-01-02 23:02:56.562 USRP packet type:
USRP_TYPE_TEXT (VK2HK) -> 5052110
M: 2019-01-02 23:02:57.062 PTT on
M: 2019-01-02 23:02:59.907 PTT off (keyed for 2845
ms)
I: 2019-01-02 23:03:13.110 Begin TX: src=5052110
rpt=0 dst=50525 slot=2 cc=0
This is the same but from the
Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open UDP listener on
127.0.0.1:31100
I: 2019-01-02 23:02:38.868 Open USRP on
127.0.0.1:34001
D: 2019-01-02 23:02:38.868 Attempt to init
DV3000 in DMR mode
M: 2019-01-02 23:02:38.868 Connecting to DV3000
hardware......
W: 2019-01-02 23:02:39.881 DV3000 not found at
127.0.0.1:2460
Project 25 IMBE Encoder/Decoder Fixed-Point
implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to
redistribute it
under certain conditions; see the file
``LICENSE'' for details.
I: 2019-01-02 23:02:39.986 Subscriber IDs
loaded: 117848
I: 2019-01-02 23:02:39.987 Default extended
metadata <50521891>
I: 2019-01-02 23:02:39.987 Connecting to
emulator on host 127.0.0.1:2470
W: 2019-01-02 23:02:39.987 Using software MBE
decoder version 1.2.3
W: 2019-01-02 23:02:39.987 Using software OP25
IMBE/AMBE vocoder
I: 2019-01-02 23:02:39.987 Starting
Analog_Bridge --> USRP thread
I: 2019-01-02 23:02:39.987 Open UDP listener on
127.0.0.1:32001
I: 2019-01-02 23:02:39.987 Starting USRP -->
HB_Bridge thread
I: 2019-01-02 23:02:56.562 Begin TX: src=5052110
rpt=0 dst=50525 slot=2 cc=0
D: 2019-01-02 23:02:59.907 End TX
I: 2019-01-02 23:03:13.111 USRP packet type:
USRP_TYPE_TEXT (VK2HK) -> 5052110
M: 2019-01-02 23:03:13.613 PTT on
D: 2019-01-02 23:03:18.694 cpu_time_used = 5081,
minTxTime = 2000, pttTime = 1546470193613, end =
1546470198694
M: 2019-01-02 23:03:18.694 PTT off (keyed for
5081 ms)
Just making sure that it looks as it should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...>
wrote:
Set the
USRP audio settings in BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or down .9,.8,etc.
On 1/2/2019 3:46 PM, Ian
Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows
it as running, if I TX from the P25 radio, I get very
broken audio out of the DMR, if I TX from the DMR
Radio I just get very harsh hash from the P25 Radio,
that was with the USRP Audio settings as per default.
I am assuming I will need to adjust those on both of
the Analog_Bridge ini files ??
I have not done any as yet this morning,
but will be looking at it hopefully in the next
hour.
------------------
Regards
Ian
(VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve
N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is working all the way
to Analog_Bridge. It also sounds like you
have a problem with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40
AM, Ian Tulley wrote:
Hi Steve, OK here is what I have been able
to achieve, P25Gateway runs fine, I can
then start MMDVM_Bridge and it connects to
the BM Master successfully, I can TX on
both the P25 radio and the DMR radio on
different repeaters and see my calls come
up on the screen output. I then start up
Analog_Bridge_P25.ini and do the same test
and again can see myself coming up on the
screen output but no audio between them.
Now when I startup Analog_Bridge_DMR.ini
and do the same test I can see myself come
up on the screen output then I get the
following error, only on that Stanza,
"Emulator Timed out on Decode" or
"Emulator Timed out on Encode" depending
on the direction of the data and still no
audio in either direction, but I can get
the DMR repeater to TX "sometimes" when
PTT from the P25 radio but no audio.
I'm not sure where to look for this one,
please remember this is on a server in the
cloud so there are no USB Dongles
connected, I'm only using the software
decoder.
Regards
Ian (VK2HK)
|
|
|
Hi Steve, wasn’t sure if you wanted it as an attachment, hoping it works via the group.
On 3 Jan 2019, at 10:08 am, Ian Tulley < ian@...> wrote:
OK, still having issues on the audio side, no matter the combination of the Audio Gain etc, it does make some differences but from P25 to DMR you can make out some of the audio but very very broken up, but from DMR to P25 its just garbage.
When I run the Analog_Bridge_P25.ini and TX, this is the last entries I see on the screen so this shows both from DMR to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP listener on 127.0.0.1:34100 I: 2019-01-02 22:58:32.106 Open USRP on 127.0.0.1:32001 M: 2019-01-02 22:58:32.106 Connecting to DV3000 hardware...... W: 2019-01-02 22:58:33.115 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 22:58:33.214 Subscriber IDs loaded: 117848 I: 2019-01-02 22:58:33.215 Default extended metadata <VK2HK> W: 2019-01-02 22:58:33.215 Using software MBE decoder version 1.2.3 W: 2019-01-02 22:58:33.215 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 22:58:33.215 Starting Analog_Bridge --> USRP thread I: 2019-01-02 22:58:33.215 Open UDP listener on 127.0.0.1:34001 I: 2019-01-02 22:58:33.215 Starting USRP --> IPSC_Bridge thread I: 2019-01-02 23:02:56.562 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:02:57.062 PTT on M: 2019-01-02 23:02:59.907 PTT off (keyed for 2845 ms) I: 2019-01-02 23:03:13.110 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open UDP listener on 127.0.0.1:31100 I: 2019-01-02 23:02:38.868 Open USRP on 127.0.0.1:34001 D: 2019-01-02 23:02:38.868 Attempt to init DV3000 in DMR mode M: 2019-01-02 23:02:38.868 Connecting to DV3000 hardware...... W: 2019-01-02 23:02:39.881 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 23:02:39.986 Subscriber IDs loaded: 117848 I: 2019-01-02 23:02:39.987 Default extended metadata <50521891> I: 2019-01-02 23:02:39.987 Connecting to emulator on host 127.0.0.1:2470 W: 2019-01-02 23:02:39.987 Using software MBE decoder version 1.2.3 W: 2019-01-02 23:02:39.987 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 23:02:39.987 Starting Analog_Bridge --> USRP thread I: 2019-01-02 23:02:39.987 Open UDP listener on 127.0.0.1:32001 I: 2019-01-02 23:02:39.987 Starting USRP --> HB_Bridge thread I: 2019-01-02 23:02:56.562 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0 D: 2019-01-02 23:02:59.907 End TX I: 2019-01-02 23:03:13.111 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:03:13.613 PTT on D: 2019-01-02 23:03:18.694 cpu_time_used = 5081, minTxTime = 2000, pttTime = 1546470193613, end = 1546470198694 M: 2019-01-02 23:03:18.694 PTT off (keyed for 5081 ms)
Just making sure that it looks as it should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...> wrote:
Set the USRP audio settings in BOTH ini files to: aslAudio = AUDIO_USE_GAIN agcGain = 1.0 dmrAudio = AUDIO_USE_GAIN dmrGain = 1.0 From there you can go up to 1.5,2,etc or down .9,.8,etc. On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as running, if I TX from the P25 radio, I get very broken audio out of the DMR, if I TX from the DMR Radio I just get very harsh hash from the P25 Radio, that was with the USRP Audio settings as per default. I am assuming I will need to adjust those on both of the Analog_Bridge ini files ??
I have not done any as yet this morning, but will be looking at it hopefully in the next hour.
------------------
Regards Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...> wrote:
So,
it sounds like P25 is working all the way to Analog_Bridge. It also sounds like you have a problem with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian Tulley wrote:
Hi Steve, OK here is what I have been able to achieve, P25Gateway runs fine, I can then start MMDVM_Bridge and it connects to the BM Master successfully, I can TX on both the P25 radio and the DMR radio on different repeaters and see my calls come up on the screen output. I then start up Analog_Bridge_P25.ini and do the same test and again can see myself coming up on the screen output but no audio between them. Now when I startup Analog_Bridge_DMR.ini and do the same test I can see myself come up on the screen output then I get the following error, only on that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out on Encode" depending on the direction of the data and still no audio in either direction, but I can get the DMR repeater to TX "sometimes" when PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is on a server in the cloud so there are no USB Dongles connected, I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
I also meant to say, I started again on the Audio gain etc., so what is in the ini file is what I got back to.
On 3 Jan 2019, at 11:44 am, Ian Tulley < ian@...> wrote:
Hi Steve, wasn’t sure if you wanted it as an attachment, hoping it works via the group.
On 3 Jan 2019, at 10:08 am, Ian Tulley < ian@...> wrote:
OK, still having issues on the audio side, no matter the combination of the Audio Gain etc, it does make some differences but from P25 to DMR you can make out some of the audio but very very broken up, but from DMR to P25 its just garbage.
When I run the Analog_Bridge_P25.ini and TX, this is the last entries I see on the screen so this shows both from DMR to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP listener on 127.0.0.1:34100 I: 2019-01-02 22:58:32.106 Open USRP on 127.0.0.1:32001 M: 2019-01-02 22:58:32.106 Connecting to DV3000 hardware...... W: 2019-01-02 22:58:33.115 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 22:58:33.214 Subscriber IDs loaded: 117848 I: 2019-01-02 22:58:33.215 Default extended metadata <VK2HK> W: 2019-01-02 22:58:33.215 Using software MBE decoder version 1.2.3 W: 2019-01-02 22:58:33.215 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 22:58:33.215 Starting Analog_Bridge --> USRP thread I: 2019-01-02 22:58:33.215 Open UDP listener on 127.0.0.1:34001 I: 2019-01-02 22:58:33.215 Starting USRP --> IPSC_Bridge thread I: 2019-01-02 23:02:56.562 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:02:57.062 PTT on M: 2019-01-02 23:02:59.907 PTT off (keyed for 2845 ms) I: 2019-01-02 23:03:13.110 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open UDP listener on 127.0.0.1:31100 I: 2019-01-02 23:02:38.868 Open USRP on 127.0.0.1:34001 D: 2019-01-02 23:02:38.868 Attempt to init DV3000 in DMR mode M: 2019-01-02 23:02:38.868 Connecting to DV3000 hardware...... W: 2019-01-02 23:02:39.881 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 23:02:39.986 Subscriber IDs loaded: 117848 I: 2019-01-02 23:02:39.987 Default extended metadata <50521891> I: 2019-01-02 23:02:39.987 Connecting to emulator on host 127.0.0.1:2470 W: 2019-01-02 23:02:39.987 Using software MBE decoder version 1.2.3 W: 2019-01-02 23:02:39.987 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 23:02:39.987 Starting Analog_Bridge --> USRP thread I: 2019-01-02 23:02:39.987 Open UDP listener on 127.0.0.1:32001 I: 2019-01-02 23:02:39.987 Starting USRP --> HB_Bridge thread I: 2019-01-02 23:02:56.562 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0 D: 2019-01-02 23:02:59.907 End TX I: 2019-01-02 23:03:13.111 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:03:13.613 PTT on D: 2019-01-02 23:03:18.694 cpu_time_used = 5081, minTxTime = 2000, pttTime = 1546470193613, end = 1546470198694 M: 2019-01-02 23:03:18.694 PTT off (keyed for 5081 ms)
Just making sure that it looks as it should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...> wrote:
Set the USRP audio settings in BOTH ini files to: aslAudio = AUDIO_USE_GAIN agcGain = 1.0 dmrAudio = AUDIO_USE_GAIN dmrGain = 1.0 From there you can go up to 1.5,2,etc or down .9,.8,etc. On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as running, if I TX from the P25 radio, I get very broken audio out of the DMR, if I TX from the DMR Radio I just get very harsh hash from the P25 Radio, that was with the USRP Audio settings as per default. I am assuming I will need to adjust those on both of the Analog_Bridge ini files ??
I have not done any as yet this morning, but will be looking at it hopefully in the next hour.
------------------
Regards Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...> wrote:
So,
it sounds like P25 is working all the way to Analog_Bridge. It also sounds like you have a problem with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian Tulley wrote:
Hi Steve, OK here is what I have been able to achieve, P25Gateway runs fine, I can then start MMDVM_Bridge and it connects to the BM Master successfully, I can TX on both the P25 radio and the DMR radio on different repeaters and see my calls come up on the screen output. I then start up Analog_Bridge_P25.ini and do the same test and again can see myself coming up on the screen output but no audio between them. Now when I startup Analog_Bridge_DMR.ini and do the same test I can see myself come up on the screen output then I get the following error, only on that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out on Encode" depending on the direction of the data and still no audio in either direction, but I can get the DMR repeater to TX "sometimes" when PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is on a server in the cloud so there are no USB Dongles connected, I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
Steve N4IRS
Yes, that works.
As a test in the DMR Analog_Bridge.ini chnge:
useEmulator = true
to
useEmulator = false
and retest
toggle quoted messageShow quoted text
On 1/2/19 7:44 PM, Ian Tulley wrote:
Hi Steve, wasn’t sure if you wanted it as an
attachment, hoping it works via the group.
On 3 Jan 2019, at 10:08 am, Ian Tulley < ian@...> wrote:
OK, still having issues on the
audio side, no matter the combination of the Audio Gain
etc, it does make some differences but from P25 to DMR
you can make out some of the audio but very very broken
up, but from DMR to P25 its just garbage.
When I run the
Analog_Bridge_P25.ini and TX, this is the last entries I
see on the screen so this shows both from DMR to P25 and
visa versa.
I: 2019-01-02 22:58:32.106 Open UDP
listener on 127.0.0.1:34100
I: 2019-01-02 22:58:32.106 Open USRP on
127.0.0.1:32001
M: 2019-01-02 22:58:32.106 Connecting to
DV3000 hardware......
W: 2019-01-02 22:58:33.115 DV3000 not
found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder
Fixed-Point implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO
WARRANTY.
This is free software, and you are welcome
to redistribute it
under certain conditions; see the file
``LICENSE'' for details.
I: 2019-01-02 22:58:33.214 Subscriber IDs
loaded: 117848
I: 2019-01-02 22:58:33.215 Default
extended metadata <VK2HK>
W: 2019-01-02 22:58:33.215 Using software
MBE decoder version 1.2.3
W: 2019-01-02 22:58:33.215 Using software
OP25 IMBE/AMBE vocoder
I: 2019-01-02 22:58:33.215 Starting
Analog_Bridge --> USRP thread
I: 2019-01-02 22:58:33.215 Open UDP
listener on 127.0.0.1:34001
I: 2019-01-02 22:58:33.215 Starting USRP
--> IPSC_Bridge thread
I: 2019-01-02 23:02:56.562 USRP packet
type: USRP_TYPE_TEXT (VK2HK) -> 5052110
M: 2019-01-02 23:02:57.062 PTT on
M: 2019-01-02 23:02:59.907 PTT off (keyed
for 2845 ms)
I: 2019-01-02 23:03:13.110 Begin TX:
src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the
Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open UDP
listener on 127.0.0.1:31100
I: 2019-01-02 23:02:38.868 Open USRP on
127.0.0.1:34001
D: 2019-01-02 23:02:38.868 Attempt to
init DV3000 in DMR mode
M: 2019-01-02 23:02:38.868 Connecting to
DV3000 hardware......
W: 2019-01-02 23:02:39.881 DV3000 not
found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder
Fixed-Point implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO
WARRANTY.
This is free software, and you are
welcome to redistribute it
under certain conditions; see the file
``LICENSE'' for details.
I: 2019-01-02 23:02:39.986 Subscriber
IDs loaded: 117848
I: 2019-01-02 23:02:39.987 Default
extended metadata <50521891>
I: 2019-01-02 23:02:39.987 Connecting to
emulator on host 127.0.0.1:2470
W: 2019-01-02 23:02:39.987 Using
software MBE decoder version 1.2.3
W: 2019-01-02 23:02:39.987 Using
software OP25 IMBE/AMBE vocoder
I: 2019-01-02 23:02:39.987 Starting
Analog_Bridge --> USRP thread
I: 2019-01-02 23:02:39.987 Open UDP
listener on 127.0.0.1:32001
I: 2019-01-02 23:02:39.987 Starting USRP
--> HB_Bridge thread
I: 2019-01-02 23:02:56.562 Begin TX:
src=5052110 rpt=0 dst=50525 slot=2 cc=0
D: 2019-01-02 23:02:59.907 End TX
I: 2019-01-02 23:03:13.111 USRP packet
type: USRP_TYPE_TEXT (VK2HK) -> 5052110
M: 2019-01-02 23:03:13.613 PTT on
D: 2019-01-02 23:03:18.694 cpu_time_used
= 5081, minTxTime = 2000, pttTime = 1546470193613,
end = 1546470198694
M: 2019-01-02 23:03:18.694 PTT off
(keyed for 5081 ms)
Just making sure that it looks as it
should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS
< szingman@...>
wrote:
Set
the USRP audio settings in BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or down
.9,.8,etc.
On 1/2/2019 3:46
PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status
md380-emu it shows it as running, if I TX from
the P25 radio, I get very broken audio out of
the DMR, if I TX from the DMR Radio I just get
very harsh hash from the P25 Radio, that was
with the USRP Audio settings as per default. I
am assuming I will need to adjust those on
both of the Analog_Bridge ini files ??
I have not done any as yet this
morning, but will be looking at it hopefully
in the next hour.
------------------
Regards
Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm,
Steve N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is working all
the way to Analog_Bridge. It also
sounds like you have a problem
with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On
1/2/19 2:40 AM, Ian Tulley wrote:
Hi Steve, OK here is what
I have been able to achieve,
P25Gateway runs fine, I can then
start MMDVM_Bridge and it connects
to the BM Master successfully, I
can TX on both the P25 radio and
the DMR radio on different
repeaters and see my calls come up
on the screen output. I then start
up Analog_Bridge_P25.ini and do
the same test and again can see
myself coming up on the screen
output but no audio between them.
Now when I startup
Analog_Bridge_DMR.ini and do the
same test I can see myself come up
on the screen output then I get
the following error, only on that
Stanza, "Emulator Timed out on
Decode" or "Emulator Timed out on
Encode" depending on the direction
of the data and still no audio in
either direction, but I can get
the DMR repeater to TX "sometimes"
when PTT from the P25 radio but no
audio.
I'm not sure where to look for
this one, please remember this is
on a server in the cloud so there
are no USB Dongles connected, I'm
only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
That worked Steve, thanks, other than very low Audio from P25 to DMR, using the settings both as 1.0 it is now working fine, so I will need to adjust those settings to get it going correctly. I didn’t think of that for the DMR side ??
On 3 Jan 2019, at 11:44 am, Ian Tulley < ian@...> wrote:
Hi Steve, wasn’t sure if you wanted it as an attachment, hoping it works via the group.
On 3 Jan 2019, at 10:08 am, Ian Tulley < ian@...> wrote:
OK, still having issues on the audio side, no matter the combination of the Audio Gain etc, it does make some differences but from P25 to DMR you can make out some of the audio but very very broken up, but from DMR to P25 its just garbage.
When I run the Analog_Bridge_P25.ini and TX, this is the last entries I see on the screen so this shows both from DMR to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP listener on 127.0.0.1:34100 I: 2019-01-02 22:58:32.106 Open USRP on 127.0.0.1:32001 M: 2019-01-02 22:58:32.106 Connecting to DV3000 hardware...... W: 2019-01-02 22:58:33.115 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 22:58:33.214 Subscriber IDs loaded: 117848 I: 2019-01-02 22:58:33.215 Default extended metadata <VK2HK> W: 2019-01-02 22:58:33.215 Using software MBE decoder version 1.2.3 W: 2019-01-02 22:58:33.215 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 22:58:33.215 Starting Analog_Bridge --> USRP thread I: 2019-01-02 22:58:33.215 Open UDP listener on 127.0.0.1:34001 I: 2019-01-02 22:58:33.215 Starting USRP --> IPSC_Bridge thread I: 2019-01-02 23:02:56.562 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:02:57.062 PTT on M: 2019-01-02 23:02:59.907 PTT off (keyed for 2845 ms) I: 2019-01-02 23:03:13.110 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open UDP listener on 127.0.0.1:31100 I: 2019-01-02 23:02:38.868 Open USRP on 127.0.0.1:34001 D: 2019-01-02 23:02:38.868 Attempt to init DV3000 in DMR mode M: 2019-01-02 23:02:38.868 Connecting to DV3000 hardware...... W: 2019-01-02 23:02:39.881 DV3000 not found at 127.0.0.1:2460 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. I: 2019-01-02 23:02:39.986 Subscriber IDs loaded: 117848 I: 2019-01-02 23:02:39.987 Default extended metadata <50521891> I: 2019-01-02 23:02:39.987 Connecting to emulator on host 127.0.0.1:2470 W: 2019-01-02 23:02:39.987 Using software MBE decoder version 1.2.3 W: 2019-01-02 23:02:39.987 Using software OP25 IMBE/AMBE vocoder I: 2019-01-02 23:02:39.987 Starting Analog_Bridge --> USRP thread I: 2019-01-02 23:02:39.987 Open UDP listener on 127.0.0.1:32001 I: 2019-01-02 23:02:39.987 Starting USRP --> HB_Bridge thread I: 2019-01-02 23:02:56.562 Begin TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0 D: 2019-01-02 23:02:59.907 End TX I: 2019-01-02 23:03:13.111 USRP packet type: USRP_TYPE_TEXT (VK2HK) -> 5052110 M: 2019-01-02 23:03:13.613 PTT on D: 2019-01-02 23:03:18.694 cpu_time_used = 5081, minTxTime = 2000, pttTime = 1546470193613, end = 1546470198694 M: 2019-01-02 23:03:18.694 PTT off (keyed for 5081 ms)
Just making sure that it looks as it should to you
On 3 Jan 2019, at 7:51 am, Steve N4IRS < szingman@...> wrote:
Set the USRP audio settings in BOTH ini files to: aslAudio = AUDIO_USE_GAIN agcGain = 1.0 dmrAudio = AUDIO_USE_GAIN dmrGain = 1.0 From there you can go up to 1.5,2,etc or down .9,.8,etc. On 1/2/2019 3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl status md380-emu it shows it as running, if I TX from the P25 radio, I get very broken audio out of the DMR, if I TX from the DMR Radio I just get very harsh hash from the P25 Radio, that was with the USRP Audio settings as per default. I am assuming I will need to adjust those on both of the Analog_Bridge ini files ??
I have not done any as yet this morning, but will be looking at it hopefully in the next hour.
------------------
Regards Ian (VK2HK)
On 2 Jan 2019, at 9:36 pm, Steve N4IRS < szingman@...> wrote:
So,
it sounds like P25 is working all the way to Analog_Bridge. It also sounds like you have a problem with Analog_Bridge for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On 1/2/19 2:40 AM, Ian Tulley wrote:
Hi Steve, OK here is what I have been able to achieve, P25Gateway runs fine, I can then start MMDVM_Bridge and it connects to the BM Master successfully, I can TX on both the P25 radio and the DMR radio on different repeaters and see my calls come up on the screen output. I then start up Analog_Bridge_P25.ini and do the same test and again can see myself coming up on the screen output but no audio between them. Now when I startup Analog_Bridge_DMR.ini and do the same test I can see myself come up on the screen output then I get the following error, only on that Stanza, "Emulator Timed out on Decode" or "Emulator Timed out on Encode" depending on the direction of the data and still no audio in either direction, but I can get the DMR repeater to TX "sometimes" when PTT from the P25 radio but no audio.
I'm not sure where to look for this one, please remember this is on a server in the cloud so there are no USB Dongles connected, I'm only using the software decoder.
Regards
Ian (VK2HK)
|
|
|
Steve N4IRS
Go ahead and adjust your levels. md380-emu is having a problem.
We can circle back a see waht is going on with the emulator.
toggle quoted messageShow quoted text
On 1/2/19 8:00 PM, Ian Tulley wrote:
That worked Steve, thanks, other than very low Audio from P25 to
DMR, using the settings both as 1.0 it is now working fine, so I
will need to adjust those settings to get it going correctly. I
didn’t think of that for the DMR side ??
On 3 Jan 2019, at 11:44 am, Ian Tulley < ian@...> wrote:
Hi Steve, wasn’t sure if you
wanted it as an attachment, hoping it works via the group.
On 3 Jan 2019, at 10:08 am, Ian Tulley
< ian@...>
wrote:
OK, still having issues on the
audio side, no matter the combination of the Audio
Gain etc, it does make some differences but from
P25 to DMR you can make out some of the audio but
very very broken up, but from DMR to P25 its just
garbage.
When I run the
Analog_Bridge_P25.ini and TX, this is the last
entries I see on the screen so this shows both
from DMR to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP
listener on 127.0.0.1:34100
I: 2019-01-02 22:58:32.106 Open USRP
on 127.0.0.1:32001
M: 2019-01-02 22:58:32.106
Connecting to DV3000 hardware......
W: 2019-01-02 22:58:33.115 DV3000
not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder
Fixed-Point implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY
NO WARRANTY.
This is free software, and you are
welcome to redistribute it
under certain conditions; see the
file ``LICENSE'' for details.
I: 2019-01-02 22:58:33.214
Subscriber IDs loaded: 117848
I: 2019-01-02 22:58:33.215 Default
extended metadata <VK2HK>
W: 2019-01-02 22:58:33.215 Using
software MBE decoder version 1.2.3
W: 2019-01-02 22:58:33.215 Using
software OP25 IMBE/AMBE vocoder
I: 2019-01-02 22:58:33.215 Starting
Analog_Bridge --> USRP thread
I: 2019-01-02 22:58:33.215 Open UDP
listener on 127.0.0.1:34001
I: 2019-01-02 22:58:33.215 Starting
USRP --> IPSC_Bridge thread
I: 2019-01-02 23:02:56.562 USRP
packet type: USRP_TYPE_TEXT (VK2HK) ->
5052110
M: 2019-01-02 23:02:57.062 PTT on
M: 2019-01-02 23:02:59.907 PTT off
(keyed for 2845 ms)
I: 2019-01-02 23:03:13.110 Begin TX:
src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the
Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open
UDP listener on 127.0.0.1:31100
I: 2019-01-02 23:02:38.868 Open
USRP on 127.0.0.1:34001
D: 2019-01-02 23:02:38.868 Attempt
to init DV3000 in DMR mode
M: 2019-01-02 23:02:38.868
Connecting to DV3000 hardware......
W: 2019-01-02 23:02:39.881 DV3000
not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder
Fixed-Point implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY
NO WARRANTY.
This is free software, and you are
welcome to redistribute it
under certain conditions; see the
file ``LICENSE'' for details.
I: 2019-01-02 23:02:39.986
Subscriber IDs loaded: 117848
I: 2019-01-02 23:02:39.987 Default
extended metadata <50521891>
I: 2019-01-02 23:02:39.987
Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-02 23:02:39.987 Using
software MBE decoder version 1.2.3
W: 2019-01-02 23:02:39.987 Using
software OP25 IMBE/AMBE vocoder
I: 2019-01-02 23:02:39.987
Starting Analog_Bridge --> USRP thread
I: 2019-01-02 23:02:39.987 Open
UDP listener on 127.0.0.1:32001
I: 2019-01-02 23:02:39.987
Starting USRP --> HB_Bridge thread
I: 2019-01-02 23:02:56.562 Begin
TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
D: 2019-01-02 23:02:59.907 End TX
I: 2019-01-02 23:03:13.111 USRP
packet type: USRP_TYPE_TEXT (VK2HK) ->
5052110
M: 2019-01-02 23:03:13.613 PTT on
D: 2019-01-02 23:03:18.694
cpu_time_used = 5081, minTxTime = 2000,
pttTime = 1546470193613, end = 1546470198694
M: 2019-01-02 23:03:18.694 PTT off
(keyed for 5081 ms)
Just making sure that it looks as it
should to you
On 3 Jan 2019, at 7:51 am, Steve
N4IRS < szingman@...>
wrote:
Set the USRP audio settings in
BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or
down .9,.8,etc.
On 1/2/2019
3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl
status md380-emu it shows it as running,
if I TX from the P25 radio, I get very
broken audio out of the DMR, if I TX
from the DMR Radio I just get very harsh
hash from the P25 Radio, that was with
the USRP Audio settings as per default.
I am assuming I will need to adjust
those on both of the Analog_Bridge ini
files ??
I have not done any as yet
this morning, but will be looking at
it hopefully in the next hour.
------------------
Regards
Ian
(VK2HK)
On 2 Jan 2019, at
9:36 pm, Steve N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is
working all the way to
Analog_Bridge. It also
sounds like you have a
problem with Analog_Bridge
for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On
1/2/19 2:40 AM, Ian Tulley
wrote:
Hi Steve, OK here
is what I have been able to
achieve, P25Gateway runs
fine, I can then start
MMDVM_Bridge and it connects
to the BM Master
successfully, I can TX on
both the P25 radio and the
DMR radio on different
repeaters and see my calls
come up on the screen
output. I then start up
Analog_Bridge_P25.ini and do
the same test and again can
see myself coming up on the
screen output but no audio
between them. Now when I
startup
Analog_Bridge_DMR.ini and do
the same test I can see
myself come up on the screen
output then I get the
following error, only on
that Stanza, "Emulator Timed
out on Decode" or "Emulator
Timed out on Encode"
depending on the direction
of the data and still no
audio in either direction,
but I can get the DMR
repeater to TX "sometimes"
when PTT from the P25 radio
but no audio.
I'm not sure where to look
for this one, please
remember this is on a server
in the cloud so there are no
USB Dongles connected, I'm
only using the software
decoder.
Regards
Ian (VK2HK)
<Analog_Bridge_DMR.ini>
|
|
|
Thanks Steve, OK, I think I have the audio level adjusted now, It may need some tweaking as I go along but it seems even between both P25 and DMR.
Her is a copy of the systemclt status for the md380-emu
root@dvswitch:/opt/MMDVM_Bridge# systemctl status md380-emu ● md380-emu.service - MD-380 Emulator Service Loaded: loaded (/lib/systemd/system/md380-emu.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-01-03 08:50:49 AEDT; 3h 34min ago Main PID: 28048 (md380-emu) Tasks: 2 (limit: 4915) CGroup: /system.slice/md380-emu.service └─28048 /usr/bin/qemu-arm-static /opt/md380-emu/md380-emu -S 2470
It appears that it is running correctly and I have restarted it a few times over all my original testing.
On 3 Jan 2019, at 12:01 pm, Steve N4IRS < szingman@...> wrote:
Go ahead and adjust your levels. md380-emu is having a problem.
We can circle back a see waht is going on with the emulator.
On 1/2/19 8:00 PM, Ian Tulley wrote:
That worked Steve, thanks, other than very low Audio from P25 to
DMR, using the settings both as 1.0 it is now working fine, so I
will need to adjust those settings to get it going correctly. I
didn’t think of that for the DMR side ??
On 3 Jan 2019, at 11:44 am, Ian Tulley < ian@...> wrote:
Hi Steve, wasn’t sure if you
wanted it as an attachment, hoping it works via the group.
On 3 Jan 2019, at 10:08 am, Ian Tulley
< ian@...>
wrote:
OK, still having issues on the
audio side, no matter the combination of the Audio
Gain etc, it does make some differences but from
P25 to DMR you can make out some of the audio but
very very broken up, but from DMR to P25 its just
garbage.
When I run the
Analog_Bridge_P25.ini and TX, this is the last
entries I see on the screen so this shows both
from DMR to P25 and visa versa.
I: 2019-01-02 22:58:32.106 Open UDP
listener on 127.0.0.1:34100
I: 2019-01-02 22:58:32.106 Open USRP
on 127.0.0.1:32001
M: 2019-01-02 22:58:32.106
Connecting to DV3000 hardware......
W: 2019-01-02 22:58:33.115 DV3000
not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder
Fixed-Point implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY
NO WARRANTY.
This is free software, and you are
welcome to redistribute it
under certain conditions; see the
file ``LICENSE'' for details.
I: 2019-01-02 22:58:33.214
Subscriber IDs loaded: 117848
I: 2019-01-02 22:58:33.215 Default
extended metadata <VK2HK>
W: 2019-01-02 22:58:33.215 Using
software MBE decoder version 1.2.3
W: 2019-01-02 22:58:33.215 Using
software OP25 IMBE/AMBE vocoder
I: 2019-01-02 22:58:33.215 Starting
Analog_Bridge --> USRP thread
I: 2019-01-02 22:58:33.215 Open UDP
listener on 127.0.0.1:34001
I: 2019-01-02 22:58:33.215 Starting
USRP --> IPSC_Bridge thread
I: 2019-01-02 23:02:56.562 USRP
packet type: USRP_TYPE_TEXT (VK2HK) ->
5052110
M: 2019-01-02 23:02:57.062 PTT on
M: 2019-01-02 23:02:59.907 PTT off
(keyed for 2845 ms)
I: 2019-01-02 23:03:13.110 Begin TX:
src=5052110 rpt=0 dst=50525 slot=2 cc=0
This is the same but from the
Analog_Bridge_DMR.ini
I: 2019-01-02 23:02:38.868 Open
UDP listener on 127.0.0.1:31100
I: 2019-01-02 23:02:38.868 Open
USRP on 127.0.0.1:34001
D: 2019-01-02 23:02:38.868 Attempt
to init DV3000 in DMR mode
M: 2019-01-02 23:02:38.868
Connecting to DV3000 hardware......
W: 2019-01-02 23:02:39.881 DV3000
not found at 127.0.0.1:2460
Project 25 IMBE Encoder/Decoder
Fixed-Point implementation
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY
NO WARRANTY.
This is free software, and you are
welcome to redistribute it
under certain conditions; see the
file ``LICENSE'' for details.
I: 2019-01-02 23:02:39.986
Subscriber IDs loaded: 117848
I: 2019-01-02 23:02:39.987 Default
extended metadata <50521891>
I: 2019-01-02 23:02:39.987
Connecting to emulator on host 127.0.0.1:2470
W: 2019-01-02 23:02:39.987 Using
software MBE decoder version 1.2.3
W: 2019-01-02 23:02:39.987 Using
software OP25 IMBE/AMBE vocoder
I: 2019-01-02 23:02:39.987
Starting Analog_Bridge --> USRP thread
I: 2019-01-02 23:02:39.987 Open
UDP listener on 127.0.0.1:32001
I: 2019-01-02 23:02:39.987
Starting USRP --> HB_Bridge thread
I: 2019-01-02 23:02:56.562 Begin
TX: src=5052110 rpt=0 dst=50525 slot=2 cc=0
D: 2019-01-02 23:02:59.907 End TX
I: 2019-01-02 23:03:13.111 USRP
packet type: USRP_TYPE_TEXT (VK2HK) ->
5052110
M: 2019-01-02 23:03:13.613 PTT on
D: 2019-01-02 23:03:18.694
cpu_time_used = 5081, minTxTime = 2000,
pttTime = 1546470193613, end = 1546470198694
M: 2019-01-02 23:03:18.694 PTT off
(keyed for 5081 ms)
Just making sure that it looks as it
should to you
On 3 Jan 2019, at 7:51 am, Steve
N4IRS < szingman@...>
wrote:
Set the USRP audio settings in
BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to 1.5,2,etc or
down .9,.8,etc.
On 1/2/2019
3:46 PM, Ian Tulley wrote:
Hi Steve, if I do systemctl
status md380-emu it shows it as running,
if I TX from the P25 radio, I get very
broken audio out of the DMR, if I TX
from the DMR Radio I just get very harsh
hash from the P25 Radio, that was with
the USRP Audio settings as per default.
I am assuming I will need to adjust
those on both of the Analog_Bridge ini
files ??
I have not done any as yet
this morning, but will be looking at
it hopefully in the next hour.
------------------
Regards
Ian
(VK2HK)
On 2 Jan 2019, at
9:36 pm, Steve N4IRS < szingman@...>
wrote:
So,
it sounds like P25 is
working all the way to
Analog_Bridge. It also
sounds like you have a
problem with Analog_Bridge
for DMR.
Are you using the emulator?
Is the emulator running?
Steve
On
1/2/19 2:40 AM, Ian Tulley
wrote:
Hi Steve, OK here
is what I have been able to
achieve, P25Gateway runs
fine, I can then start
MMDVM_Bridge and it connects
to the BM Master
successfully, I can TX on
both the P25 radio and the
DMR radio on different
repeaters and see my calls
come up on the screen
output. I then start up
Analog_Bridge_P25.ini and do
the same test and again can
see myself coming up on the
screen output but no audio
between them. Now when I
startup
Analog_Bridge_DMR.ini and do
the same test I can see
myself come up on the screen
output then I get the
following error, only on
that Stanza, "Emulator Timed
out on Decode" or "Emulator
Timed out on Encode"
depending on the direction
of the data and still no
audio in either direction,
but I can get the DMR
repeater to TX "sometimes"
when PTT from the P25 radio
but no audio.
I'm not sure where to look
for this one, please
remember this is on a server
in the cloud so there are no
USB Dongles connected, I'm
only using the software
decoder.
Regards
Ian (VK2HK)
<Analog_Bridge_DMR.ini>
|
|
|
Steve N4IRS
Well,
That looks fine but you did report timeouts with the Emulator
before. Maybe something else is listening to UDP 2470 (I doubt it)
Stop the emulator
netstat -unap | grep 2470
You can also get the leves set then retry the emulator.
what is the result of uname -a?
Steve
toggle quoted messageShow quoted text
On 1/2/19 8:27 PM, Ian Tulley wrote:
Thanks Steve, OK, I think I have the audio level adjusted now, It
may need some tweaking as I go along but it seems even between
both P25 and DMR.
Her is a copy of the systemclt status for the
md380-emu
root@dvswitch:/opt/MMDVM_Bridge# systemctl status
md380-emu
● md380-emu.service - MD-380 Emulator Service
Loaded: loaded
(/lib/systemd/system/md380-emu.service; enabled; vendor
preset: enabled)
Active: active (running) since Thu 2019-01-03
08:50:49 AEDT; 3h 34min ago
Main PID: 28048 (md380-emu)
Tasks: 2 (limit: 4915)
CGroup: /system.slice/md380-emu.service
└─28048 /usr/bin/qemu-arm-static
/opt/md380-emu/md380-emu -S 2470
It appears that it is running correctly and I have
restarted it a few times over all my original testing.
On 3 Jan 2019, at 12:01 pm, Steve N4IRS < szingman@...>
wrote:
Go ahead and adjust your levels. md380-emu is
having a problem. We can circle back a see waht is
going on with the emulator.
On 1/2/19 8:00 PM, Ian
Tulley wrote:
That worked Steve, thanks, other than very low Audio
from P25 to DMR, using the settings both as 1.0 it is
now working fine, so I will need to adjust those
settings to get it going correctly. I didn’t think of
that for the DMR side ??
On 3 Jan 2019, at 11:44 am, Ian
Tulley < ian@...>
wrote:
Hi Steve, wasn’t sure
if you wanted it as an attachment, hoping it
works via the group.
On 3 Jan 2019, at 10:08 am,
Ian Tulley < ian@...>
wrote:
OK,
still having issues on the audio side,
no matter the combination of the Audio
Gain etc, it does make some
differences but from P25 to DMR you
can make out some of the audio but
very very broken up, but from DMR to
P25 its just garbage.
When I run the
Analog_Bridge_P25.ini and TX, this is
the last entries I see on the screen
so this shows both from DMR to P25 and
visa versa.
I: 2019-01-02
22:58:32.106 Open UDP listener on
127.0.0.1:34100
I: 2019-01-02
22:58:32.106 Open USRP on
127.0.0.1:32001
M: 2019-01-02
22:58:32.106 Connecting to DV3000
hardware......
W: 2019-01-02
22:58:33.115 DV3000 not found at
127.0.0.1:2460
Project 25 IMBE
Encoder/Decoder Fixed-Point
implementation
Version 1.0 (c)
Copyright 2009
This program comes with
ABSOLUTELY NO WARRANTY.
This is free software,
and you are welcome to redistribute
it
under certain
conditions; see the file ``LICENSE''
for details.
I: 2019-01-02
22:58:33.214 Subscriber IDs loaded:
117848
I: 2019-01-02
22:58:33.215 Default extended
metadata <VK2HK>
W: 2019-01-02
22:58:33.215 Using software MBE
decoder version 1.2.3
W: 2019-01-02
22:58:33.215 Using software OP25
IMBE/AMBE vocoder
I: 2019-01-02
22:58:33.215 Starting Analog_Bridge
--> USRP thread
I: 2019-01-02
22:58:33.215 Open UDP listener on
127.0.0.1:34001
I: 2019-01-02
22:58:33.215 Starting USRP -->
IPSC_Bridge thread
I: 2019-01-02
23:02:56.562 USRP packet type:
USRP_TYPE_TEXT (VK2HK) -> 5052110
M: 2019-01-02
23:02:57.062 PTT on
M: 2019-01-02
23:02:59.907 PTT off (keyed for 2845
ms)
I: 2019-01-02
23:03:13.110 Begin TX: src=5052110
rpt=0 dst=50525 slot=2 cc=0
This is the same but
from the Analog_Bridge_DMR.ini
I: 2019-01-02
23:02:38.868 Open UDP listener on
127.0.0.1:31100
I: 2019-01-02
23:02:38.868 Open USRP on
127.0.0.1:34001
D: 2019-01-02
23:02:38.868 Attempt to init
DV3000 in DMR mode
M: 2019-01-02
23:02:38.868 Connecting to DV3000
hardware......
W: 2019-01-02
23:02:39.881 DV3000 not found at
127.0.0.1:2460
Project 25 IMBE
Encoder/Decoder Fixed-Point
implementation
Version 1.0 (c)
Copyright 2009
This program comes
with ABSOLUTELY NO WARRANTY.
This is free software,
and you are welcome to
redistribute it
under certain
conditions; see the file
``LICENSE'' for details.
I: 2019-01-02
23:02:39.986 Subscriber IDs
loaded: 117848
I: 2019-01-02
23:02:39.987 Default extended
metadata <50521891>
I: 2019-01-02
23:02:39.987 Connecting to
emulator on host 127.0.0.1:2470
W: 2019-01-02
23:02:39.987 Using software MBE
decoder version 1.2.3
W: 2019-01-02
23:02:39.987 Using software OP25
IMBE/AMBE vocoder
I: 2019-01-02
23:02:39.987 Starting
Analog_Bridge --> USRP thread
I: 2019-01-02
23:02:39.987 Open UDP listener on
127.0.0.1:32001
I: 2019-01-02
23:02:39.987 Starting USRP -->
HB_Bridge thread
I: 2019-01-02
23:02:56.562 Begin TX: src=5052110
rpt=0 dst=50525 slot=2 cc=0
D: 2019-01-02
23:02:59.907 End TX
I: 2019-01-02
23:03:13.111 USRP packet type:
USRP_TYPE_TEXT (VK2HK) ->
5052110
M: 2019-01-02
23:03:13.613 PTT on
D: 2019-01-02
23:03:18.694 cpu_time_used = 5081,
minTxTime = 2000, pttTime =
1546470193613, end = 1546470198694
M: 2019-01-02
23:03:18.694 PTT off (keyed for
5081 ms)
Just making sure that it
looks as it should to you
On 3 Jan 2019, at
7:51 am, Steve N4IRS < szingman@...>
wrote:
Set
the USRP audio settings in
BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to
1.5,2,etc or down .9,.8,etc.
On
1/2/2019 3:46 PM, Ian Tulley
wrote:
Hi Steve, if I do
systemctl status md380-emu
it shows it as running, if I
TX from the P25 radio, I get
very broken audio out of the
DMR, if I TX from the DMR
Radio I just get very harsh
hash from the P25 Radio,
that was with the USRP Audio
settings as per default. I
am assuming I will need to
adjust those on both of the
Analog_Bridge ini files ??
I have not
done any as yet this
morning, but will be
looking at it hopefully in
the next hour.
------------------
Regards
Ian (VK2HK)
On 2 Jan
2019, at 9:36 pm,
Steve N4IRS < szingman@...>
wrote:
So,
it sounds like
P25 is working
all the way to
Analog_Bridge.
It also sounds
like you have a
problem with
Analog_Bridge
for DMR.
Are you using
the emulator?
Is the emulator
running?
Steve
On
1/2/19 2:40 AM,
Ian Tulley
wrote:
Hi
Steve, OK here
is what I have
been able to
achieve,
P25Gateway runs
fine, I can then
start
MMDVM_Bridge and
it connects to
the BM Master
successfully, I
can TX on both
the P25 radio
and the DMR
radio on
different
repeaters and
see my calls
come up on the
screen output. I
then start up
Analog_Bridge_P25.ini
and do the same
test and again
can see myself
coming up on the
screen output
but no audio
between them.
Now when I
startup
Analog_Bridge_DMR.ini
and do the same
test I can see
myself come up
on the screen
output then I
get the
following error,
only on that
Stanza,
"Emulator Timed
out on Decode"
or "Emulator
Timed out on
Encode"
depending on the
direction of the
data and still
no audio in
either
direction, but I
can get the DMR
repeater to TX
"sometimes" when
PTT from the P25
radio but no
audio.
I'm not sure
where to look
for this one,
please remember
this is on a
server in the
cloud so there
are no USB
Dongles
connected, I'm
only using the
software
decoder.
Regards
Ian (VK2HK)
<Analog_Bridge_DMR.ini>
|
|
|
OK, nothing using that port, results of unane -a, Linux dvswitch 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64 GNU/Linux
and now it is working fine with the md380-emu running and useEmulator = true, so I’m not sure what went wrong there Steve, but thanks for that help, I will need to do another one of these in the near future so I have noted all that has been done so I can see if it works or has the same issues. At least I know now what I will have to do.
On 3 Jan 2019, at 12:31 pm, Steve N4IRS < szingman@...> wrote:
Well,
That looks fine but you did report timeouts with the Emulator
before. Maybe something else is listening to UDP 2470 (I doubt it)
Stop the emulator
netstat -unap | grep 2470
You can also get the leves set then retry the emulator.
what is the result of uname -a?
Steve
On 1/2/19 8:27 PM, Ian Tulley wrote:
Thanks Steve, OK, I think I have the audio level adjusted now, It
may need some tweaking as I go along but it seems even between
both P25 and DMR.
Her is a copy of the systemclt status for the
md380-emu
root@dvswitch:/opt/MMDVM_Bridge# systemctl status
md380-emu
● md380-emu.service - MD-380 Emulator Service
Loaded: loaded
(/lib/systemd/system/md380-emu.service; enabled; vendor
preset: enabled)
Active: active (running) since Thu 2019-01-03
08:50:49 AEDT; 3h 34min ago
Main PID: 28048 (md380-emu)
Tasks: 2 (limit: 4915)
CGroup: /system.slice/md380-emu.service
└─28048 /usr/bin/qemu-arm-static
/opt/md380-emu/md380-emu -S 2470
It appears that it is running correctly and I have
restarted it a few times over all my original testing.
On 3 Jan 2019, at 12:01 pm, Steve N4IRS < szingman@...>
wrote:
Go ahead and adjust your levels. md380-emu is
having a problem. We can circle back a see waht is
going on with the emulator.
On 1/2/19 8:00 PM, Ian
Tulley wrote:
That worked Steve, thanks, other than very low Audio
from P25 to DMR, using the settings both as 1.0 it is
now working fine, so I will need to adjust those
settings to get it going correctly. I didn’t think of
that for the DMR side ??
On 3 Jan 2019, at 11:44 am, Ian
Tulley < ian@...>
wrote:
Hi Steve, wasn’t sure
if you wanted it as an attachment, hoping it
works via the group.
On 3 Jan 2019, at 10:08 am,
Ian Tulley < ian@...>
wrote:
OK,
still having issues on the audio side,
no matter the combination of the Audio
Gain etc, it does make some
differences but from P25 to DMR you
can make out some of the audio but
very very broken up, but from DMR to
P25 its just garbage.
When I run the
Analog_Bridge_P25.ini and TX, this is
the last entries I see on the screen
so this shows both from DMR to P25 and
visa versa.
I: 2019-01-02
22:58:32.106 Open UDP listener on
127.0.0.1:34100
I: 2019-01-02
22:58:32.106 Open USRP on
127.0.0.1:32001
M: 2019-01-02
22:58:32.106 Connecting to DV3000
hardware......
W: 2019-01-02
22:58:33.115 DV3000 not found at
127.0.0.1:2460
Project 25 IMBE
Encoder/Decoder Fixed-Point
implementation
Version 1.0 (c)
Copyright 2009
This program comes with
ABSOLUTELY NO WARRANTY.
This is free software,
and you are welcome to redistribute
it
under certain
conditions; see the file ``LICENSE''
for details.
I: 2019-01-02
22:58:33.214 Subscriber IDs loaded:
117848
I: 2019-01-02
22:58:33.215 Default extended
metadata <VK2HK>
W: 2019-01-02
22:58:33.215 Using software MBE
decoder version 1.2.3
W: 2019-01-02
22:58:33.215 Using software OP25
IMBE/AMBE vocoder
I: 2019-01-02
22:58:33.215 Starting Analog_Bridge
--> USRP thread
I: 2019-01-02
22:58:33.215 Open UDP listener on
127.0.0.1:34001
I: 2019-01-02
22:58:33.215 Starting USRP -->
IPSC_Bridge thread
I: 2019-01-02
23:02:56.562 USRP packet type:
USRP_TYPE_TEXT (VK2HK) -> 5052110
M: 2019-01-02
23:02:57.062 PTT on
M: 2019-01-02
23:02:59.907 PTT off (keyed for 2845
ms)
I: 2019-01-02
23:03:13.110 Begin TX: src=5052110
rpt=0 dst=50525 slot=2 cc=0
This is the same but
from the Analog_Bridge_DMR.ini
I: 2019-01-02
23:02:38.868 Open UDP listener on
127.0.0.1:31100
I: 2019-01-02
23:02:38.868 Open USRP on
127.0.0.1:34001
D: 2019-01-02
23:02:38.868 Attempt to init
DV3000 in DMR mode
M: 2019-01-02
23:02:38.868 Connecting to DV3000
hardware......
W: 2019-01-02
23:02:39.881 DV3000 not found at
127.0.0.1:2460
Project 25 IMBE
Encoder/Decoder Fixed-Point
implementation
Version 1.0 (c)
Copyright 2009
This program comes
with ABSOLUTELY NO WARRANTY.
This is free software,
and you are welcome to
redistribute it
under certain
conditions; see the file
``LICENSE'' for details.
I: 2019-01-02
23:02:39.986 Subscriber IDs
loaded: 117848
I: 2019-01-02
23:02:39.987 Default extended
metadata <50521891>
I: 2019-01-02
23:02:39.987 Connecting to
emulator on host 127.0.0.1:2470
W: 2019-01-02
23:02:39.987 Using software MBE
decoder version 1.2.3
W: 2019-01-02
23:02:39.987 Using software OP25
IMBE/AMBE vocoder
I: 2019-01-02
23:02:39.987 Starting
Analog_Bridge --> USRP thread
I: 2019-01-02
23:02:39.987 Open UDP listener on
127.0.0.1:32001
I: 2019-01-02
23:02:39.987 Starting USRP -->
HB_Bridge thread
I: 2019-01-02
23:02:56.562 Begin TX: src=5052110
rpt=0 dst=50525 slot=2 cc=0
D: 2019-01-02
23:02:59.907 End TX
I: 2019-01-02
23:03:13.111 USRP packet type:
USRP_TYPE_TEXT (VK2HK) ->
5052110
M: 2019-01-02
23:03:13.613 PTT on
D: 2019-01-02
23:03:18.694 cpu_time_used = 5081,
minTxTime = 2000, pttTime =
1546470193613, end = 1546470198694
M: 2019-01-02
23:03:18.694 PTT off (keyed for
5081 ms)
Just making sure that it
looks as it should to you
On 3 Jan 2019, at
7:51 am, Steve N4IRS < szingman@...>
wrote:
Set
the USRP audio settings in
BOTH ini files to:
aslAudio = AUDIO_USE_GAIN
agcGain = 1.0
dmrAudio = AUDIO_USE_GAIN
dmrGain = 1.0
From there you can go up to
1.5,2,etc or down .9,.8,etc.
On
1/2/2019 3:46 PM, Ian Tulley
wrote:
Hi Steve, if I do
systemctl status md380-emu
it shows it as running, if I
TX from the P25 radio, I get
very broken audio out of the
DMR, if I TX from the DMR
Radio I just get very harsh
hash from the P25 Radio,
that was with the USRP Audio
settings as per default. I
am assuming I will need to
adjust those on both of the
Analog_Bridge ini files ??
I have not
done any as yet this
morning, but will be
looking at it hopefully in
the next hour.
------------------
Regards
Ian (VK2HK)
On 2 Jan
2019, at 9:36 pm,
Steve N4IRS < szingman@...>
wrote:
So,
it sounds like
P25 is working
all the way to
Analog_Bridge.
It also sounds
like you have a
problem with
Analog_Bridge
for DMR.
Are you using
the emulator?
Is the emulator
running?
Steve
On
1/2/19 2:40 AM,
Ian Tulley
wrote:
Hi
Steve, OK here
is what I have
been able to
achieve,
P25Gateway runs
fine, I can then
start
MMDVM_Bridge and
it connects to
the BM Master
successfully, I
can TX on both
the P25 radio
and the DMR
radio on
different
repeaters and
see my calls
come up on the
screen output. I
then start up
Analog_Bridge_P25.ini
and do the same
test and again
can see myself
coming up on the
screen output
but no audio
between them.
Now when I
startup
Analog_Bridge_DMR.ini
and do the same
test I can see
myself come up
on the screen
output then I
get the
following error,
only on that
Stanza,
"Emulator Timed
out on Decode"
or "Emulator
Timed out on
Encode"
depending on the
direction of the
data and still
no audio in
either
direction, but I
can get the DMR
repeater to TX
"sometimes" when
PTT from the P25
radio but no
audio.
I'm not sure
where to look
for this one,
please remember
this is on a
server in the
cloud so there
are no USB
Dongles
connected, I'm
only using the
software
decoder.
Regards
Ian (VK2HK)
<Analog_Bridge_DMR.ini>
|
|
|
