Date
1 - 15 of 15
Unable to connect to Brandmeister using HBlink #hblink
|
ve6gcd@...
Hi,
Recently I am no longer able to connect to Brandmeister. Below are the fail logs that I keep on getting: INFO 2020-12-05 19:24:48,178 (BMR30262) Sending login request to master 158.69.203.89:62031
INFO 2020-12-05 19:24:48,250 (BMR30262) Repeater Login ACK Received with 32bit ID: 3124053916
INFO 2020-12-05 19:24:48,326 (BMR30262) Repeater Authentication Accepted
INFO 2020-12-05 19:24:48,326 (BMR30262) Repeater Configuration Sent
INFO 2020-12-05 19:24:48,398 (BMR30262) MSTCL Recieved
INFO 2020-12-05 19:24:53,176 (BMR30262) Sending login request to master 158.69.203.89:62031
INFO 2020-12-05 19:24:53,248 (BMR30262) Repeater Login ACK Received with 32bit ID: 3124053916
INFO 2020-12-05 19:24:53,321 (BMR30262) Repeater Authentication Accepted
INFO 2020-12-05 19:24:53,321 (BMR30262) Repeater Configuration Sent
INFO 2020-12-05 19:24:53,396 (BMR30262) MSTCL Recieved
INFO 2020-12-05 19:24:58,180 (BMR30262) Sending login request to master 158.69.203.89:62031
INFO 2020-12-05 19:24:58,253 (BMR30262) Repeater Login ACK Received with 32bit ID: 2539204885
INFO 2020-12-05 19:24:58,327 (BMR30262) Repeater Authentication Accepted
INFO 2020-12-05 19:24:58,328 (BMR30262) Repeater Configuration Sent
INFO 2020-12-05 19:24:58,400 (BMR30262) MSTCL Recieved
INFO 2020-12-05 19:25:03,176 (BMR30262) Sending login request to master 158.69.203.89:62031
INFO 2020-12-05 19:25:03,248 (BMR30262) Repeater Login ACK Received with 32bit ID: 2539204885
INFO 2020-12-05 19:25:03,321 (BMR30262) Repeater Authentication Accepted
INFO 2020-12-05 19:25:03,321 (BMR30262) Repeater Configuration Sent
INFO 2020-12-05 19:25:03,393 (BMR30262) MSTCL Recieved
INFO 2020-12-05 19:25:08,179 (BMR30262) Sending login request to master 158.69.203.89:62031
INFO 2020-12-05 19:25:08,251 (BMR30262) Repeater Login ACK Received with 32bit ID: 2539204885
INFO 2020-12-05 19:25:08,324 (BMR30262) Repeater Authentication Accepted
INFO 2020-12-05 19:25:08,324 (BMR30262) Repeater Configuration Sent
INFO 2020-12-05 19:25:08,397 (BMR30262) MSTCL Recieved
INFO 2020-12-05 19:25:13,176 (BMR30262) Sending login request to master 158.69.203.89:62031
INFO 2020-12-05 19:25:13,250 (BMR30262) Repeater Login ACK Received with 32bit ID: 592463761
INFO 2020-12-05 19:25:13,323 (BMR30262) Repeater Authentication Accepted
INFO 2020-12-05 19:25:13,323 (BMR30262) Repeater Configuration Sent
INFO 2020-12-05 19:25:13,396 (BMR30262) MSTCL Recieved
73, Geoffrey VE6GCD
|
|
|
|
Richard W4JXA
A new Brandmister requirement is a password has to be used.
toggle quoted messageShow quoted text
Go to the Brandmister site to set it up. W4JXA Richard 73
|
|
|
|
G4WXN@...
I have been wondering about this, I currently login to the BM master directly, but want to use So I get access to all the DMR networks. Password still the default? G4WXN
|
|
|
|
Yes it is. I had forgotten to make the service start on reboot, so
it was down. It is back up and will now survive a reboot.
toggle quoted messageShow quoted text
Please understand, hblink.dvswitch.org is pretty much just a place to test your connections. There is no traffic. Steve N4IRS
On 12/6/20 7:36 AM,
G4WXN@... wrote:
|
|
|
|
@AndrewVK2HAC
Also i am advised that if you want to use TG91 it needs to be direct with BM and not via another server/system.
|
|
|
|
ve6gcd@...
I already did that, changed password via Self Care and after changing the connection password I obtained the same result. Pretty sure the updated password is correct (otherwise I get an MSTNAK Received message).
|
|
|
|
ve6gcd@...
What really changed was the frequency requirement. As soon as I changed it to the repeater frequency pair in HBlink I was able to get in. Thanks guys 73.
|
|
|
|
David BV3UN
Hi ve6gcd
may i know what is that mean ? "As soon as I changed it to the repeater frequency pair in HBlink I was able to get in" ,i have same problem and i sure i set the same password between BM Self card and hblink thanks
|
|
|
|
Matthew 2E0SIP
Brandmeister don't allow logins from HBLink and actively drop them, at least on the masters I have tried.
|
|
|
|
I think the issue is if you are configured for repeater (dual slot) and have the transmit and receive frequency the same (simplex) BM will not allow the connect.
This is to block misconfigured duplex hotspots. Steve N4IRS
|
|
|
|
Doug
I have a HBLink server thats been running for many months now on a cloud server, about 2 weeks ago it just stopped connecting to brandmeister.
On starting it manualy I noticed an error coming back MSTCL Recieved the same as in your posting. I have repeater freqs set in the connectors to BM and also my own Password login set as it allways has been and was running. The only way I could get my system back going was to image the server, start a new server with a different IP address and put the image back on the new server start it and it all worked instantly. From this I got that MSTCL Recieved means the IP address has been blocked. Doug ZL3DMH
|
|
|
|
If you are connecting via a peer in hbklink.cfg to Brandmeister you should disconnect it and request an OpenBridge.
On Thu, Feb 11, 2021 at 9:33 PM Doug <zl3dmh@...> wrote: I have a HBLink server thats been running for many months now on a cloud server, about 2 weeks ago it just stopped connecting to brandmeister. --
Doug Gooden troytrojan@...
|
|
|
|
Can you ping the master from the IP address you think is blocked?
toggle quoted messageShow quoted text
On 2/11/21 10:00 PM, Doug wrote:
I have a HBLink server thats been running for many months now on a cloud server, about 2 weeks ago it just stopped connecting to brandmeister.
|
|
|
|
Doug
Unfortunately I cannot test to see if I could ping the master as I deleted the original server when the new one was going.
But as I was receiving back from the master - Repeater Authentication Accepted - I would assume that pinging it would not be a problem. its something that happens in the next 2 lines - Repeater Configuration Sent - MSTCL Recieved. I tried searching to see what MSTCL Recieved means and come up with absolutely nothing. All I know for certain is the same setup from a different IP works and you do not get back from the master MSTCL Recieved and everything connects as normal. Doug ZL3DMH
|
|
|
|
David BV3UN
Hi Steve
it works .after i make TX/RX are different .for example TX=433800000 ,RX=433500000,it login BM success now
|
|
|