Date
1 - 8 of 8
What Ports need to be forwarded?
|
I currently have the IP address of my DVswitch set to the DMZ in my router, and I would like to just forward the individual ports that I need forwarded for it to work.
Im using DVswitch to link analog to digital DMR. I'm only seeing ports 31100, 31103 being used in my MMDVM_Bridge log file. what other log files should I look at to see what ports I'm using.? I: 2021-01-04 01:46:05.965 =
I: 2021-01-04 02:17:56.977 This software is for use on amateur radio networks only,
I: 2021-01-04 02:17:56.977 it is to be used for educational purposes only. Its use on
I: 2021-01-04 02:17:56.977 commercial networks is strictly prohibited.
I: 2021-01-04 02:17:56.977 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2021-01-04 02:17:56.977 MMDVM_Bridge-20201129_V1.6.2 is starting
M: 2021-01-04 02:17:56.977 Built 16:43:40 Nov 29 2020 (GitID #89f8998)
I: 2021-01-04 02:17:56.977 General Parameters
I: 2021-01-04 02:17:56.977 Callsign: W3TWA
I: 2021-01-04 02:17:56.977 Id: 317446611
I: 2021-01-04 02:17:56.977 Duplex: no
I: 2021-01-04 02:17:56.977 Timeout: 600s
I: 2021-01-04 02:17:56.977 D-Star: disabled
I: 2021-01-04 02:17:56.978 DMR: enabled
I: 2021-01-04 02:17:56.978 YSF: disabled
I: 2021-01-04 02:17:56.978 P25: disabled
I: 2021-01-04 02:17:56.978 NXDN: disabled
I: 2021-01-04 02:17:56.978 Modem Parameters
I: 2021-01-04 02:17:56.978 Port: /dev/null
I: 2021-01-04 02:17:56.978 RX Invert: no
I: 2021-01-04 02:17:56.978 TX Invert: no
I: 2021-01-04 02:17:56.978 PTT Invert: no
I: 2021-01-04 02:17:56.978 TX Delay: 100ms
I: 2021-01-04 02:17:56.978 RX Offset: 0Hz
I: 2021-01-04 02:17:56.978 TX Offset: 0Hz
I: 2021-01-04 02:17:56.978 RX DC Offset: 0
I: 2021-01-04 02:17:56.978 TX DC Offset: 0
I: 2021-01-04 02:17:56.978 RF Level: 100.0%
I: 2021-01-04 02:17:56.978 DMR Delay: 0 (0.0ms)
I: 2021-01-04 02:17:56.978 RX Level: 50.0%
I: 2021-01-04 02:17:56.978 CW Id TX Level: 50.0%
I: 2021-01-04 02:17:56.978 D-Star TX Level: 50.0%
I: 2021-01-04 02:17:56.978 DMR TX Level: 50.0%
I: 2021-01-04 02:17:56.978 YSF TX Level: 50.0%
I: 2021-01-04 02:17:56.978 P25 TX Level: 50.0%
I: 2021-01-04 02:17:56.978 NXDN TX Level: 50.0%
I: 2021-01-04 02:17:56.978 RX Frequency: 444775000Hz (444775000Hz)
I: 2021-01-04 02:17:56.978 TX Frequency: 449775000Hz (449775000Hz)
M: 2021-01-04 02:17:56.978 Opening the MMDVM
I: 2021-01-04 02:17:56.978 Display Parameters
I: 2021-01-04 02:17:56.978 Type:
I: 2021-01-04 02:17:56.979 DMR Network Parameters
I: 2021-01-04 02:17:56.979 Address: 3102.repeater.net
I: 2021-01-04 02:17:56.979 Port: 62031
I: 2021-01-04 02:17:56.979 Local: 62032
I: 2021-01-04 02:17:56.979 Jitter: 360ms
I: 2021-01-04 02:17:56.979 Slot 1: disabled
I: 2021-01-04 02:17:56.979 Slot 2: enabled
I: 2021-01-04 02:17:56.979 Mode Hang: 3s
I: 2021-01-04 02:17:57.019 Info Parameters
I: 2021-01-04 02:17:57.019 Callsign: W3TWA
I: 2021-01-04 02:17:57.019 RX Frequency: 444775000Hz
I: 2021-01-04 02:17:57.019 TX Frequency: 449775000Hz
I: 2021-01-04 02:17:57.019 Power: 0W
I: 2021-01-04 02:17:57.019 Latitude: 40.789738deg N
I: 2021-01-04 02:17:57.020 Longitude: -76.121414deg E
I: 2021-01-04 02:17:57.020 Height: 0m
I: 2021-01-04 02:17:57.020 Location: "Tamaqua, PA"
I: 2021-01-04 02:17:57.020 Description: "W3TWA DMR"
I: 2021-01-04 02:17:57.020 URL: "http://qrz.com/db/w3twa"
M: 2021-01-04 02:17:57.020 DMR, Opening DMR Network
I: 2021-01-04 02:17:57.020 RSSI
I: 2021-01-04 02:17:57.020 Mapping File: /dev/null
I: 2021-01-04 02:17:57.020 Loaded 0 RSSI data mapping points from /dev/null
I: 2021-01-04 02:17:57.020 DMR Id Lookups
I: 2021-01-04 02:17:57.021 File: /var/lib/mmdvm/DMRIds.dat
I: 2021-01-04 02:17:57.021 Reload: 24 hours
I: 2021-01-04 02:17:57.932 Loaded 182480 Ids to the DMR callsign lookup table
I: 2021-01-04 02:17:57.933 DMR RF Parameters
I: 2021-01-04 02:17:57.933 Id: 317446611
I: 2021-01-04 02:17:57.933 Color Code: 1
I: 2021-01-04 02:17:57.933 Self Only: no
I: 2021-01-04 02:17:57.933 Embedded LC Only: yes
I: 2021-01-04 02:17:57.933 Dump Talker Alias Data: no
I: 2021-01-04 02:17:57.933 Prefixes: 0
I: 2021-01-04 02:17:57.933 Call Hang: 3s
I: 2021-01-04 02:17:57.933 TX Hang: 3s
I: 2021-01-04 02:17:57.933 Mode Hang: 10s
M: 2021-01-04 02:17:57.933 DMR, Opening INI file: DVSwitch.ini
I: 2021-01-04 02:17:57.933 Started the DMR Id lookup reload thread
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] address -> 127.0.0.1
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] txPort -> 31100
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] rxPort -> 31103
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] slot -> 2
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] exportTG -> 0
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] hangTimerInFrames -> 0
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] talkerAlias -> %callsign %location %description
M: 2021-01-04 02:17:57.952 DMR, Transmitting on 127.0.0.1:31100, and listening on port 31103. Result = 1
M: 2021-01-04 02:17:57.952 MMDVM_Bridge-20201129_V1.6.2 is running
M: 2021-01-04 02:18:08.170 DMR, Logged into the master successfully: 3102.repeater.net:62031
M: 2021-01-04 02:22:04.463 DMR Slot 2, received network voice header from KC3PJJ to TG 314267
M: 2021-01-04 02:22:04.578 DMR, TX state = ON
I: 2021-01-04 02:22:04.579 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:22:04.996 DMR Talker Alias (Data Format 2, Received 6/12 char): 'KC3PJJ'
M: 2021-01-04 02:22:05.717 DMR Talker Alias (Data Format 2, Received 12/12 char): 'KC3PJJ Mason'
M: 2021-01-04 02:22:07.133 DMR, TX state = OFF, DMR frame count was 44 frames
M: 2021-01-04 02:22:09.432 DMR Slot 2, received network end of voice transmission, 5.2 seconds, 0% packet loss, BER: 0.0%
M: 2021-01-04 02:22:11.885 DMR, TX state = ON
I: 2021-01-04 02:22:11.886 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:22:14.208 DMR, TX state = OFF, DMR frame count was 60 frames
M: 2021-01-04 02:29:59.971 DMR, TX state = ON
I: 2021-01-04 02:29:59.971 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:30:13.403 DMR, TX state = OFF, DMR frame count was 226 frames
M: 2021-01-04 02:32:43.903 DMR Slot 2, received network voice header from KB2MXV to TG 314267
M: 2021-01-04 02:32:44.011 DMR, TX state = ON
I: 2021-01-04 02:32:44.011 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:32:44.568 DMR Talker Alias (Data Format 2, Received 6/23 char): 'KB2MXV'
M: 2021-01-04 02:32:45.286 DMR Talker Alias (Data Format 2, Received 13/23 char): 'KB2MXV Frank '
M: 2021-01-04 02:32:45.991 DMR Talker Alias (Data Format 2, Received 20/23 char): 'KB2MXV Frank DMR ID:'
M: 2021-01-04 02:32:46.521 DMR, TX state = OFF, DMR frame count was 44 frames
M: 2021-01-04 02:32:47.210 DMR Slot 2, received network end of voice transmission, 3.4 seconds, 0% packet loss, BER: 0.0%
M: 2021-01-04 02:32:47.732 DMR, TX state = ON
I: 2021-01-04 02:32:47.732 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:32:52.246 DMR, TX state = OFF, DMR frame count was 77 frames
|
|
|
|
Frank,
toggle quoted messageShow quoted text
31100 and 31103 are used internally for Analog_Bridge to communicate with MMDVM_Bridge. You do not need to open those ports. As far as your connectivity to and from the DMR network, you do not need to open any ports. As long as you NAT and MMDVM_Bridge can reach the outside world on UDP port 62031, you are good. The datafiles needed are downloaded via HTTP. You will need to be able to resolve addresses via DNS. Long story short, you do not need any inbound ports open. Steve N4IRS
On 1/3/21 9:52 PM, Frank C. D'Amato
wrote:
I currently have the IP address of my DVswitch set to the DMZ in my router, and I would like to just forward the individual ports that I need forwarded for it to work.
|
|
|
|
Steve,
Thanks for the quick reply. I forwarded 62031 and 8888 to the ip address of the DVswitch 8888 im using for the dashboard. The RX Monitor is no longer turning green when I press it, it goes right to RED. What did I miss? Netstat shows this root@raspberrypi:~# netstat -tnap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 781/node
tcp 0 0 127.0.0.1:5939 0.0.0.0:* LISTEN 603/teamviewerd
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 483/sshd
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 357/cupsd
tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 623/lighttpd
tcp 0 0 127.0.0.1:6010 0.0.0.0:* LISTEN 16115/sshd: root@pt
tcp 0 0 0.0.0.0:2812 0.0.0.0:* LISTEN 505/monit
tcp 0 0 0.0.0.0:1994 0.0.0.0:* LISTEN 771/Quantar_Bridge
tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 475/vncserver-x11-c
tcp 0 0 127.0.0.1:33713 127.0.0.1:49494 ESTABLISHED 1957/vncserverui
tcp 0 0 192.168.1.6:53226 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53210 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:46686 131.100.0.203:5938 ESTABLISHED 603/teamviewerd
tcp 0 0 192.168.1.6:53174 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53178 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53202 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:8888 192.168.1.1:50707 TIME_WAIT -
tcp 0 0 192.168.1.6:53162 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53198 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:34509 140.82.6.227:9007 TIME_WAIT -
tcp 0 0 192.168.1.6:53206 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:8888 192.168.1.1:50793 ESTABLISHED 623/lighttpd
tcp 0 0 192.168.1.6:8888 192.168.1.1:50838 TIME_WAIT -
tcp 0 0 192.168.1.6:54851 104.131.81.32:9007 TIME_WAIT -
tcp 0 0 192.168.1.6:8888 192.168.1.1:50876 TIME_WAIT -
tcp 0 0 192.168.1.6:22 192.168.1.10:50974 ESTABLISHED 16144/sshd: root@no
tcp 0 0 192.168.1.6:53166 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 127.0.0.1:5939 127.0.0.1:50202 ESTABLISHED 603/teamviewerd
tcp 0 224 192.168.1.6:22 192.168.1.10:50969 ESTABLISHED 16115/sshd: root@pt
tcp 0 0 192.168.1.6:53194 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53214 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53222 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:8888 192.168.1.1:50916 FIN_WAIT2 623/lighttpd
tcp 0 0 192.168.1.6:53230 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53158 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53218 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53170 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:58246 165.254.239.137:443 ESTABLISHED 475/vncserver-x11-c
tcp 0 0 127.0.0.1:49494 127.0.0.1:33713 ESTABLISHED 475/vncserver-x11-c
tcp 0 0 192.168.1.6:53182 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:53190 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp 0 0 192.168.1.6:8888 192.168.1.1:50964 ESTABLISHED 623/lighttpd
tcp 0 0 127.0.0.1:50202 127.0.0.1:5939 ESTABLISHED 1743/TeamViewer
tcp 0 0 192.168.1.6:53186 192.168.1.66:631 ESTABLISHED 464/cups-browsed
tcp6 0 0 :::22 :::* LISTEN 483/sshd
tcp6 0 0 ::1:631 :::* LISTEN 357/cupsd
tcp6 0 0 :::8888 :::* LISTEN 623/lighttpd
tcp6 0 0 ::1:6010 :::* LISTEN 16115/sshd: root@pt
tcp6 0 0 :::2812 :::* LISTEN 505/monit
tcp6 0 0 :::5900 :::* LISTEN 475/vncserver-x11-c
root@raspberrypi:~#
|
|
|
|
Frank,
toggle quoted messageShow quoted text
Sorry forgot about the dashboard and the RX monitor. RX monitor uses 8080 TCP. Also you can stop Quantar Bridge with: systemctl stop quantar_bridge systemctl disable quantar_bridge Steve
On 1/3/21 10:15 PM, Frank C. D'Amato
wrote:
|
|
|
|
You can start / stop the web proxy with:
toggle quoted messageShow quoted text
systemctl start webproxy
On 1/3/21 10:15 PM, Frank C. D'Amato
wrote:
Steve,
|
|
|
|
I'm already using port 8080 for something else on my network.
can that port be changed on the dvswitch?
|
|
|
|
edit:
toggle quoted messageShow quoted text
/lib/systemd/system/webproxy.service
On 1/3/21 10:34 PM, Frank C. D'Amato
wrote:
I'm already using port 8080 for something else on my network.
|
|
|
|
Thanks again. that worked
|
|
|