YSF Reflector bridging with BM.


Lito - WI6Y
 

Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y


Steve N4IRS
 
Edited

Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
 
How do I bridge my YSF reflector with a BM talkgroup?
 
73,
 
Lito WI6Y


Lito - WI6Y
 

Hi Steve,

Where can I get this from?

Lito


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y


Steve N4IRS
 

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y



Lito - WI6Y
 

Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y



Steve N4IRS
 

What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y




Lito - WI6Y
 

That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y




Steve N4IRS
 

What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y





Lito - WI6Y
 

3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y





Steve N4IRS
 

Show me everything from apt-get update through apt-get install mmdvm-bridge.

On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y






Steve N4IRS
 

Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge

On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y






Lito - WI6Y
 

That worked.. how do I start the service ?

Lito


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:32 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge

On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y






Steve N4IRS
 

MMDVM_Bridge MMDVM_Bridge.ini

On 05/07/2018 08:36 PM, Roselito de los Reyes wrote:
That worked.. how do I start the service ?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:32 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge

On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y







Lito - WI6Y
 

�� Where is the object stored.. Sorry to be a pain.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:36 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
MMDVM_Bridge MMDVM_Bridge.ini

On 05/07/2018 08:36 PM, Roselito de los Reyes wrote:
That worked.. how do I start the service ?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:32 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge

On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y







Steve N4IRS
 

/opt/MMDVM_Bridge

On 05/07/2018 08:38 PM, Roselito de los Reyes wrote:
�� Where is the object stored.. Sorry to be a pain.

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:36 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
MMDVM_Bridge MMDVM_Bridge.ini

On 05/07/2018 08:36 PM, Roselito de los Reyes wrote:
That worked.. how do I start the service ?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:32 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge

On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y








Steve N4IRS
 

There is also a systemd unit at /lib/systemd/system/mmdvm_bridge you can use to start the service after you have it configured. I suggest you run it in the foreground until you are comfortable it's running the way you want. 

On 05/07/2018 08:36 PM, Roselito de los Reyes wrote:
That worked.. how do I start the service ?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:32 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge

On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
3.16.0-4-amd64



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What version of Debian 8? 9?
64 bit ?
32 bit ?

On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this

Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate


This is on a linode platform.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
What Hardware platform?
What OS?
try apt-get install dvswitch

On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,

I get this

root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'mmdvm-bridge' has no installation candidate



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137

On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,

Where can I get this from?

Lito

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 1                        ; Export slot

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = 3113042            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166                 ; Which TG to export
Slot = 1                        ; Export slot


Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.

The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)

Think crossover cable.
Input to output, RX to TX
output to input, TX to RX

Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.

Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.

Hope this helps,
73, Steve N4IRS


On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,

How do I bridge my YSF reflector with a BM talkgroup?

73,

Lito WI6Y







Lito - WI6Y
 

Hello,

I am getting these messages, what would be the cause of this?

M: 2018-05-08 21:57:21.391 DMR Slot 2, received network voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data Format 1, Received 6/6 char): 'KQ6RC '
D: 2018-05-08 21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08 21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08 21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 29% packet loss, BER: 3.5%

Also I don't see messages from the YSF side

73,

Lito WI6Y



Steve N4IRS
 

Is this your second bridge?

On 05/08/2018 05:59 PM, Roselito de los Reyes wrote:
Hello,

I am getting these messages, what would be the cause of this?

M: 2018-05-08 21:57:21.391 DMR Slot 2, received network voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data Format 1, Received 6/6 char): 'KQ6RC '
D: 2018-05-08 21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08 21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08 21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 29% packet loss, BER: 3.5%

Also I don't see messages from the YSF side

73,

Lito WI6Y




Lito - WI6Y
 

yes


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Tuesday, May 8, 2018 3:10 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Is this your second bridge?

On 05/08/2018 05:59 PM, Roselito de los Reyes wrote:
Hello,

I am getting these messages, what would be the cause of this?

M: 2018-05-08 21:57:21.391 DMR Slot 2, received network voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data Format 1, Received 6/6 char): 'KQ6RC '
D: 2018-05-08 21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08 21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08 21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 29% packet loss, BER: 3.5%

Also I don't see messages from the YSF side

73,

Lito WI6Y




Steve N4IRS
 

I think you should run one bridge for a while and get used to how things work.

73, Steve N4IRS

On 05/08/2018 06:11 PM, Roselito de los Reyes wrote:
yes

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Tuesday, May 8, 2018 3:10 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
 
Is this your second bridge?

On 05/08/2018 05:59 PM, Roselito de los Reyes wrote:
Hello,

I am getting these messages, what would be the cause of this?

M: 2018-05-08 21:57:21.391 DMR Slot 2, received network voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data Format 1, Received 6/6 char): 'KQ6RC '
D: 2018-05-08 21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08 21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08 21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 29% packet loss, BER: 3.5%

Also I don't see messages from the YSF side

73,

Lito WI6Y