|
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35103 ; Port to send AMBE TLV frames to (export)
RXPort = 35100 ; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
toggle quoted messageShow quoted text
On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Hi Steve,
Where can I get this from?
Lito
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:40 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35103 ; Port to send AMBE TLV frames to (export)
RXPort = 35100 ; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
toggle quoted messageShow quoted text
On 05/07/2018 07:49 PM, Roselito de los
Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of
the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 35103 ; Port to send
AMBE TLV frames to (export)
RXPort = 35100 ; Port to
listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames
to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a
valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and
exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you
want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like
you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since
neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito
de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 4:54 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35103 ; Port to send AMBE TLV frames to (export)
RXPort = 35100 ; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
What Hardware platform?
What OS?
try apt-get install dvswitch
toggle quoted messageShow quoted text
On 05/07/2018 08:18 PM, Roselito de los
Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to
by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49 PM, Roselito
de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting all
of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 35103 ; Port to
send AMBE TLV frames to (export)
RXPort = 35100 ; Port to
listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 35100 ; Port to send AMBE TLV
frames to (export)
RXPort = 35103 ; Port to listen on
(import)
FallbackID = 3113042 ; In case we can not find
a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and
exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you
want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to
use.
Use the MMDVM_Bridge to enable and configure the modes just
like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since
neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM,
Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
That worked.. but when I redid the mmdvm bridge I get this
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
This is on a linode platform.
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
What Hardware platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35103 ; Port to send AMBE TLV frames to (export)
RXPort = 35100 ; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
What version of Debian 8? 9?
64 bit ?
32 bit ?
toggle quoted messageShow quoted text
On 05/07/2018 08:23 PM, Roselito de los
Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to
by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
This is on a linode platform.
What Hardware platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18 PM, Roselito
de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred
to by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49 PM,
Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting
all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE
TLV frames to (export)
TXPort = 35103 ; Port
to send AMBE TLV frames to (export)
RXPort = 35100 ; Port
to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE
TLV frames to (export)
TXPort = 35100 ; Port to send AMBE
TLV frames to (export)
RXPort = 35103 ; Port to listen on
(import)
FallbackID = 3113042 ; In case we can not
find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing
and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode
you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want
to use.
Use the MMDVM_Bridge to enable and configure the modes
just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier
since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF
reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44
PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM
talkgroup?
73,
Lito WI6Y
|
|
|
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:24 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
What version of Debian 8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
This is on a linode platform.
What Hardware platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35103 ; Port to send AMBE TLV frames to (export)
RXPort = 35100 ; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
Show me everything from apt-get update through apt-get install
mmdvm-bridge.
toggle quoted messageShow quoted text
On 05/07/2018 08:25 PM, Roselito de los
Reyes wrote:
What version of Debian 8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23 PM, Roselito
de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this
Reading state information... Done
Package mmdvm-bridge is not available, but is referred
to by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
This is on a linode platform.
What Hardware platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18 PM,
Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is
referred to by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation
candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49
PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of
supporting all of the modes used in the various
MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send
AMBE TLV frames to (export)
TXPort = 35103 ;
Port to send AMBE TLV frames to (export)
RXPort = 35100 ;
Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send
AMBE TLV frames to (export)
TXPort = 35100 ; Port to send
AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen
on (import)
FallbackID = 3113042 ; In case we can
not find a valid DMR id in the database, export
this one
ExportTG = 3166 ; Which TG to
export
Slot = 1 ; Export slot
Each stanza contains the information unique to
importing and exporting data to another Partner
(stanza)
You point a TXPort of one mode at the RXPort of the
mode you want to connect to. I have bolded the
changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you
want to use.
Use the MMDVM_Bridge to enable and configure the
modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is
easier since neither mode needs a gateway to
communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF
reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018
04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM
talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge
toggle quoted messageShow quoted text
On 05/07/2018 08:25 PM, Roselito de los
Reyes wrote:
What version of Debian 8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23 PM, Roselito
de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this
Reading state information... Done
Package mmdvm-bridge is not available, but is referred
to by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
This is on a linode platform.
What Hardware platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18 PM,
Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is
referred to by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation
candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49
PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of
supporting all of the modes used in the various
MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send
AMBE TLV frames to (export)
TXPort = 35103 ;
Port to send AMBE TLV frames to (export)
RXPort = 35100 ;
Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send
AMBE TLV frames to (export)
TXPort = 35100 ; Port to send
AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen
on (import)
FallbackID = 3113042 ; In case we can
not find a valid DMR id in the database, export
this one
ExportTG = 3166 ; Which TG to
export
Slot = 1 ; Export slot
Each stanza contains the information unique to
importing and exporting data to another Partner
(stanza)
You point a TXPort of one mode at the RXPort of the
mode you want to connect to. I have bolded the
changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you
want to use.
Use the MMDVM_Bridge to enable and configure the
modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is
easier since neither mode needs a gateway to
communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF
reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018
04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM
talkgroup?
73,
Lito WI6Y
|
|
|
That worked.. how do I start the service ?
Lito
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:32 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge
On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
What version of Debian 8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
This is on a linode platform.
What Hardware platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35103 ; Port to send AMBE TLV frames to (export)
RXPort = 35100 ; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
MMDVM_Bridge MMDVM_Bridge.ini
toggle quoted messageShow quoted text
On 05/07/2018 08:36 PM, Roselito de los
Reyes wrote:
That worked.. how do I start the service ?
Lito
Edit
/etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge
On 05/07/2018 08:25 PM, Roselito
de los Reyes wrote:
What version of Debian
8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23 PM,
Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get
this
Reading state information... Done
Package mmdvm-bridge is not available, but is
referred to by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation
candidate
This is on a linode platform.
What Hardware
platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18
PM, Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install
mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is
referred to by another package.
This may mean that the package is missing, has
been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation
candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018
07:49 PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of
supporting all of the modes used in the various
MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to
send AMBE TLV frames to (export)
TXPort = 35103
; Port to send AMBE TLV frames to (export)
RXPort = 35100
; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to
send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send
AMBE TLV frames to (export)
RXPort = 35103 ; Port to
listen on (import)
FallbackID = 3113042 ; In case we
can not find a valid DMR id in the database,
export this one
ExportTG = 3166 ; Which TG to
export
Slot = 1 ; Export slot
Each stanza contains the information unique to
importing and exporting data to another Partner
(stanza)
You point a TXPort of one mode at the RXPort of
the mode you want to connect to. I have bolded
the changes.
The DMR TXPort now points to the YSF RXPort
(35103)
The YSF TXPort now points to the DMRRXPort
(35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes
you want to use.
Use the MMDVM_Bridge to enable and configure the
modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is
easier since neither mode needs a gateway to
communicate.
Point the YSF mode in MMDVM_Bridge.ini at your
YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On
05/07/2018 04:44 PM, Roselito de los Reyes
wrote:
Hello,
How do I bridge my YSF reflector with a BM
talkgroup?
73,
Lito WI6Y
|
|
|
�� Where is the object stored.. Sorry to be a pain.
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Monday, May 7, 2018 5:36 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
MMDVM_Bridge MMDVM_Bridge.ini
On 05/07/2018 08:36 PM, Roselito de los Reyes wrote:
That worked.. how do I start the service ?
Lito
Edit /etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge
On 05/07/2018 08:25 PM, Roselito de los Reyes wrote:
What version of Debian 8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23 PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get this
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
This is on a linode platform.
What Hardware platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18 PM, Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018 07:49 PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of supporting all of the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35103 ; Port to send AMBE TLV frames to (export)
RXPort = 35100 ; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
/opt/MMDVM_Bridge
toggle quoted messageShow quoted text
On 05/07/2018 08:38 PM, Roselito de los
Reyes wrote:
�� Where is the object stored.. Sorry to be a pain.
MMDVM_Bridge
MMDVM_Bridge.ini
On 05/07/2018 08:36 PM, Roselito
de los Reyes wrote:
That worked.. how do I start the service ?
Lito
Edit
/etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge
On 05/07/2018 08:25 PM,
Roselito de los Reyes wrote:
What version of
Debian 8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23
PM, Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I
get this
Reading state information... Done
Package mmdvm-bridge is not available, but is
referred to by another package.
This may mean that the package is missing, has
been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation
candidate
This is on a linode platform.
What Hardware
platform?
What OS?
try apt-get install dvswitch
On 05/07/2018
08:18 PM, Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install
mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but
is referred to by another package.
This may mean that the package is missing,
has been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no
installation candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On
05/07/2018 07:49 PM, Roselito de los Reyes
wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of
supporting all of the modes used in the
various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address
to send AMBE TLV frames to (export)
TXPort = 35103
; Port to send AMBE TLV
frames to (export)
RXPort = 35100
; Port to listen on
(import)
Slot = 1 ; Export
slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address
to send AMBE TLV frames to (export)
TXPort = 35100 ; Port to
send AMBE TLV frames to (export)
RXPort = 35103 ; Port to
listen on (import)
FallbackID = 3113042 ; In case
we can not find a valid DMR id in the
database, export this one
ExportTG = 3166 ; Which TG
to export
Slot = 1 ; Export
slot
Each stanza contains the information unique
to importing and exporting data to another
Partner (stanza)
You point a TXPort of one mode at the RXPort
of the mode you want to connect to. I have
bolded the changes.
The DMR TXPort now points to the YSF RXPort
(35103)
The YSF TXPort now points to the DMRRXPort
(35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2
modes you want to use.
Use the MMDVM_Bridge to enable and configure
the modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life
is easier since neither mode needs a gateway
to communicate.
Point the YSF mode in MMDVM_Bridge.ini at
your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at
BM.
Hope this helps,
73, Steve N4IRS
On
05/07/2018 04:44 PM, Roselito de los Reyes
wrote:
Hello,
How do I bridge my YSF reflector with a
BM talkgroup?
73,
Lito WI6Y
|
|
|
Steve N4IRS
There is also a systemd unit at /lib/systemd/system/mmdvm_bridge you
can use to start the service after you have it configured. I suggest
you run it in the foreground until you are comfortable it's running
the way you want.
toggle quoted messageShow quoted text
On 05/07/2018 08:36 PM, Roselito de los
Reyes wrote:
That worked.. how do I start the service ?
Lito
Edit
/etc/apt/sources.list.d/dvswitch
replace jessie with stretch
apt-get update
apt-get install mmdvm-bridge
On 05/07/2018 08:25 PM, Roselito
de los Reyes wrote:
What version of Debian
8? 9?
64 bit ?
32 bit ?
On 05/07/2018 08:23 PM,
Roselito de los Reyes wrote:
That worked.. but when I redid the mmdvm bridge I get
this
Reading state information... Done
Package mmdvm-bridge is not available, but is
referred to by another package.
This may mean that the package is missing, has been
obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation
candidate
This is on a linode platform.
What Hardware
platform?
What OS?
try apt-get install dvswitch
On 05/07/2018 08:18
PM, Roselito de los Reyes wrote:
Hi Steve,
I get this
root@localhost:~/tmp# apt-get install
mmdvm-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mmdvm-bridge is not available, but is
referred to by another package.
This may mean that the package is missing, has
been obsoleted, or
is only available from another source
E: Package 'mmdvm-bridge' has no installation
candidate
<https://dvswitch.groups.io/g/main/topic/18231504#1154>
See message 1137
On 05/07/2018
07:49 PM, Roselito de los Reyes wrote:
Hi Steve,
Where can I get this from?
Lito
Lito,
MMDVM_Bridge it a Partner program capable of
supporting all of the modes used in the various
MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to
send AMBE TLV frames to (export)
TXPort = 35103
; Port to send AMBE TLV frames to (export)
RXPort = 35100
; Port to listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to
send AMBE TLV frames to (export)
TXPort = 35100 ; Port to send
AMBE TLV frames to (export)
RXPort = 35103 ; Port to
listen on (import)
FallbackID = 3113042 ; In case we
can not find a valid DMR id in the database,
export this one
ExportTG = 3166 ; Which TG to
export
Slot = 1 ; Export slot
Each stanza contains the information unique to
importing and exporting data to another Partner
(stanza)
You point a TXPort of one mode at the RXPort of
the mode you want to connect to. I have bolded
the changes.
The DMR TXPort now points to the YSF RXPort
(35103)
The YSF TXPort now points to the DMRRXPort
(35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes
you want to use.
Use the MMDVM_Bridge to enable and configure the
modes just like you would in MMDVM.ini
In the case of YSFn <-> DMR your life is
easier since neither mode needs a gateway to
communicate.
Point the YSF mode in MMDVM_Bridge.ini at your
YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On
05/07/2018 04:44 PM, Roselito de los Reyes
wrote:
Hello,
How do I bridge my YSF reflector with a BM
talkgroup?
73,
Lito WI6Y
|
|
|
Hello,
I am getting these messages, what would be the cause of this?
M: 2018-05-08 21:57:21.391 DMR Slot 2, received network voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data Format 1, Received 6/6 char): 'KQ6RC '
D: 2018-05-08 21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08 21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08 21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 29% packet loss, BER: 3.5%
Also I don't see messages from the YSF side
73,
Lito WI6Y
|
|
|
Steve N4IRS
Is this your second bridge?
toggle quoted messageShow quoted text
On 05/08/2018 05:59 PM, Roselito de los
Reyes wrote:
Hello,
I am getting these messages, what would be the cause of this?
M: 2018-05-08 21:57:21.391 DMR Slot 2, received network
voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data Format 1,
Received 6/6 char): 'KQ6RC '
D: 2018-05-08
21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08
21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08
21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network end
of voice transmission, 3.7 seconds, 29% packet loss, BER: 3.5%
Also I don't see messages from the YSF side
73,
Lito WI6Y
|
|
|
toggle quoted messageShow quoted text
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Tuesday, May 8, 2018 3:10 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] YSF Reflector bridging with BM.
Is this your second bridge?
On 05/08/2018 05:59 PM, Roselito de los Reyes wrote:
Hello,
I am getting these messages, what would be the cause of this?
M: 2018-05-08 21:57:21.391 DMR Slot 2, received network voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data Format 1, Received 6/6 char): 'KQ6RC '
D: 2018-05-08 21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08 21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08 21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 29% packet loss, BER: 3.5%
Also I don't see messages from the YSF side
73,
Lito WI6Y
|
|
|
Steve N4IRS
I think you should run one bridge for a while and get used to how
things work.
73, Steve N4IRS
toggle quoted messageShow quoted text
On 05/08/2018 06:11 PM, Roselito de los
Reyes wrote:
yes
Is this your second bridge?
On 05/08/2018 05:59 PM, Roselito
de los Reyes wrote:
Hello,
I am getting these messages, what would be the cause of
this?
M: 2018-05-08 21:57:21.391 DMR Slot 2, received network
voice header from KQ6RC to TG 5152
M: 2018-05-08 21:57:22.177 DMR Talker Alias (Data
Format 1, Received 6/6 char): 'KQ6RC '
D: 2018-05-08
21:57:24.409 DMR Slot 2, lost audio for 373ms filling in
D: 2018-05-08
21:57:24.776 DMR Slot 2, lost audio for 367ms filling in
D: 2018-05-08
21:57:25.138 DMR Slot 2, lost audio for 362ms filling in
M: 2018-05-08 21:57:25.206 DMR Slot 2, received network
end of voice transmission, 3.7 seconds, 29% packet loss,
BER: 3.5%
Also I don't see messages from the YSF side
73,
Lito WI6Y
|
|
|
