Ok, so Corey's idea of using the ip of the server as the host server name worked a bit. I was able to run the debug and got the result Logged into master successfully Login to master has failed, retry

So I hear great audio from the DMR to my Allstar node. That part is good. However, my audio to the Dmr side is either too low...and weirdest of all is that I keep getting what sounds like a woman's co

Folks, I’m preparing for a pretty big feature add for confbridge.py and hb_confbridge.py. I’m going to be adding voice telemetry response to linking actions – that means voice feedback to tell you wha

thanks for the tips and advice. I solved the problem. it works well. Mark

Ok, so my next question is regarding adding D-star and/or p25 to the Allstar DMR Bridge. I would LOVE to be able to use the cloud-based server to also connect D-star / P25 to Allstar. Especially P25 b

Greetings, I successfully setup hblink yesterday and connected 3 hotspots to it (eventually I will connect a MMDVM repeater into the mix). Along with the hotspots, I created a client connection to BM

can someone help me with instructions to use the NW Digital 6-channel device with Analog Bridge? I have AMBED on the same machine as my DVSwitch install and have used it with XLXD so I know that it wo

Following this thread back, I think you were telling me that I need two fob's to do DMR to DSTAR. I understand the AB's would be cascaded to do that. Right now I am just doing DMR to analog, but I am

Yessir (some white space squeezed out here): [AMBE_AUDIO] address = 127.0.0.1 ; IP address of xx_Bridge txPort = 31103 ; Transmit TLV frames to partner on this port rxPort = 31100 ; Listen for TLV fra

Test. Please ignore.

the non-functional transmit data in the log shows a "src=" number that I do not recognize DMR, Begin TX: src=13157013 rpt=315146902 dst=315148 slot=2 cc=6 metadata=315146901 In your how-to example, th

You and I homed in on it at the same time. If you use CCS7+2 for gatewayDmrid it ends up using garbage for the source ID. And the repeater will not transmit. Perhaps a comment to this effect would be

I'm currently running dmrlink. I have a Motorola repeater connected to a master stanza and hb_bridge connected to a master stanza and that gives ALS access thru hblink. I have several talkgroups defin

Hi All, I'm curious if anyone has experimented with forwarding GPS / SMS data from a hblink application to an external master for additional processing? Also, does anyone know if GPS messages are Ackn

Hi all, I've set up a master, MASTER-1, using hb_confbridge.py and its working great. All clients can connect to the master and all traffic is repeated to all of the clients. I would like to add a par

What does it mean if I keep getting a repeated failed connection to the master server? I set up an ASL to DMR Bridge. Sometimes it works for days, and then suddenly it will refuse to maintain a steady

Hi i get stuck because some of the commands are not working. maybe someone can help me to figure out how to make it work. i am trying to install asl dmr bridge on raspberry pi 3 B+ and i not that expe

Good Day all, I'm just getting started with HBlink/DMRlink and I'm receiving an error when starting HBlink: DEBUG 2018-07-30 07:48:12,103 Logging system started, anything from here on gets logged INFO

I have an ASL to DMR bridge using a DV3000 with a RPi-3B. How do I change from IPSC protocol to HB protocol for Brandmeister connections? Thanks, Tom / K5TRA

Removing source validation from hblink.py master probably won’t work because of hblink.py master’s a ability to repeat back to a group of connected clients. These two features will have to be separate