Hi all, I'm trying to setup a basic parrot, which consists of the following- hb_parrot (Master) - Provides Parrot Service hblink (Master) - Allows clients to connect to the service hb_confbridge (Clie

To All, and more specifically Cort, Steve and Mike, Thanks for all you've done for the hobby this year, and wishing you lovely festive break. 73, Peter, M0NWI

Anyone here have a clue who to talk to at Brandmeister when your connection looks good but nothing shows up online or comes out the other end? -- Cort Buffington H: +1-785-813-1501 M: +1-785-865-7206

I have been playing with DMRLink and HBLink (using IPSC_Bridge and HB_Bridge branches) and have a system up and running that looks like follows: <HB Repeaters><--> [HB_Bridge] <--> [IPSC_Bridge] <-->

At this point have a fresh install of DIAL on a RPi2. Have Analog_Bridge running and communicating with the DV3000 per the DMRGateway install notes. I guess next step is HBLink. Could use some assista

I'm having problems connecting my allstar USRP nodes (i.e node number that interfaces to analog_bridge) to other USRP nodes. I have no problem connecting the USRP to a URIx hardware node. But, I canno

I was forwarded a post from Doug WA3DSP concerning interconnection to other services/modes on the HAMVOIP list. I have seen in the past that Doug considers himself the guardian of all good audio and A

Hi What is everyone running for a ID from analog when you do a allstar to dmr bridge. 0 was giving me troubles on my radio.

At this point, think I'm lost, dazed and confused (more than normal). Is there a guru out there that might log in and see if I have this stuff installed properly and help explain some of the configs?

Hello Everyone, I'm missing something. Foreground: ThumbDV passed AMBEtest3 ASL: I have ASL running with rpt.conf 1999 USRP working and connected to /opt/Analog_Bridge. I have node 2083 connected to 1

We have been working on the next revision of Analog_Bridge. Along with adding features and refining settings, we are trying to squash bugs. While testing the NWDigital DV300u (ThumbDV) we encountered

Hi guys, I am getting my feet wet with HBlink and doing some minimal testing. I had some questions on a few things: For starters, one planned use of a master is for my hotspots only, as such I have de

Hi, Please forgive me if this is an elementary question, but reading the example code hasnt made things any clearer. From what I gather, The majority of the code covers routing between pre-defined net

I have setup a small Conference Bridge on reflector.dvswitch.org using HBlink for testing and demonstration of various features of HBlink, DMRlink and DVSwitch. I will expand the features as time (and

I have been testing the following setup and have been getting a strange error on the Brandmeister master server. I have configured a private node on my existing Allstar server and now have Analog_Brid

Running an Allstar node to BM TG and it works great most of the time. Then every so often it partially disconnects from Brandmeister. The status page says its offline. If I restart the hbbridge side t

Hello all, this is my first message to this group. I started using the HBlink last weekend. My conference bridge has two masters (Trunk and HBlink) and and one client (Brandmeister). The client is con

After some internal discussion, we have established a official position for connecting any of the DVSwitch tools to other Network servers (c-Bridge, BM, DMR+...) The position is posted as the home pag

I’m gonna have to defer to others. I have no hotspots, don’t use PiStar and don’t know what DMR Gateway mode is. Cort Buffington 785-865-7206

I recently did a git pull on the dmrlink repo, and now DMRmonitor seems to be broken. It's no longer showing calls, but the log down below is being updated. I'm treading lightly here because I'm still